Question 1

Is there a recommended toilet seat to use? My seat does not close properly when this unit is installed. The seat and lid stay about 3 inches open and

Accepted Answer

I cant say I'm aware of a reccomended toilet seat, ive got some cheap one that was here when I moved in, plastic garbage. Fits just fine. If I were you I would inspect what is causing it to stay open. I'm assuming you mean the tip of the rim is above that of the bowl by about 3 inches, if that's the case there must either be some obstruction further down propping it up, hinge design incompatibility, or otherwise physical restraint to it falling down completely. Maybe your seat has one of those rubber things under neath that helps support it propperly when people sit on it but that may be hitting the newly installed device causing the lift. Maybe the seat you have isn't appropriately shaped to be able to conform around the device in such a way that it rests down properly. Either way if you inspect around the hinge and specifically at whichever area/point makes contact between the seat and device/bowl first than that will probably be the source of your problem. At that point if you can't rig something on to or off from either the device or seat you have, such that they could work together, than your only remaining option would be to replace one or the other. Depending on your situation, a toilet seat is probably the better one to replace, and just get one in person, or one with very good images from online so you can inspect and be certain that the specific areas that caused problems with your current setup don't happen again.

Question 2

Hello, i installed my bidet yesterday. should i be hearing any sounds? its seem like the water is still running.

Accepted Answer

There should be no running water sounds when not in use if properly installed and functional. Thread tape was important for me. As well as the small one way valve that I wasn't aware of until putting everything together. If you are hearing any sound when not in use it could be a loose connection due to not being tight enough or from a lack of sufficient thread tape, or if it only happens when someone is using water anywhere else, maybe the one way valve isn't installed or isn't installed properly. This would allow cold/hot water to flow through the system to whichever is currently in use anywhere in the house. Another possible reason is a defective unit, if this is the case you would see some form of leak somewhere from the unit itself, possibly from the connections, possibly from internal connections you cant see, those would be difficult to diagnose until they fill up the inside area of the unit and start to flow out of a seam somewhere.

Question 3

How does hot water work? Cause the water line only has cold water does it warm the water in the system?

Accepted Answer

Unit has two connections from below the sink or other hot ' cold supply.

Manufacturer	ANALIM
Part Number	T-BS-079
Item Weight	2.27 pounds
Product Dimensions	16.5 x 6.5 x 0.3 inches
Item model number	T-BS-079
Color	White
Shape	AN-bidet pro
Included Components	a 25" hosepipe, a 80" hosepipe, adapter, 3 rubber washer, 1 tape for better joint.
Batteries Included?	No
Batteries Required?	No

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

ANALIM Bidet Attachment for Toilet Seat, Non-Electric Bidet Hot and Cold Fresh Water for Frontal & Rear Wash with Self-cleaning Dual Nozzles and Adjustable Pressure Control

Description

Specifications

Have a Question? See What Others Asked

Common Questions