--- product_id: 771936045 title: "WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714)" brand: "wen" price: "€ 198.24" currency: EUR in_stock: true reviews_count: 5 category: "Wen" url: https://www.desertcart.pt/products/771936045-wen-magnetic-base-for-dial-indicators-three-segment-industrial-strength store_origin: PT region: Portugal --- # WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714) **Brand:** wen **Price:** € 198.24 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714) by wen - **How much does it cost?** € 198.24 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.pt](https://www.desertcart.pt/products/771936045-wen-magnetic-base-for-dial-indicators-three-segment-industrial-strength) ## Best For - wen enthusiasts ## Why This Product - Trusted wen brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Review: Fits all your indactor needs and more. - First, I already have many magnetic bases for Indicators. As a Union Trades Millwright, these tool gets used daily, doing turbine rotor lifts, pump shaft runout and much more. I have many Starrett bases as well as older Craftsman and others just to name a couple. I wanted another holder that had the fine tune adjustment up at the indicator clamp. This WEN mag base not only fullfilled that requirement, but exceeded my expectation with the many sizes and ways to clamp every indicator I have in my arsenal, but the many ways to adjust the indicator is outstanding. The magnet clamping force is really good. The size of the base is slightly bigger than a Starrett, but on par with many other makes. The mag V-groove is good and also has small flat edges along with another side of the mag base have flat edges for multiple ways of attaching it to different machinery shapes. The only slight downside would be that the on/off switch is sensitive and if slightly bumped could disengage. That is the only thing I could find to complain about. This is a very handy and versatile Magnetic base for all of your various types of indicators with a lot of adjustment that makes my work easier and faster. What a great tool. I will be buying more, Steve Review: Magnet Strength is good - Great price and works good. A fragment of the cost for expensive bases. Magnet strength is good. ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B0C1Q7WTHG | | Brand | WEN | | Brand Name | WEN | | Colour | black | | Country of Origin | USA | | Customer Reviews | 4.7 out of 5 stars 26 Reviews | | Global Trade Identification Number | 00044459107132 | | Included Components | Magnetic Base for Dial Indicators | | Item Shape | Rectangular | | Manufacturer | WEN | | Material | Iron | | Material Type | Iron | | Model Number | 10714 | | Part Number | 10714 | | Shape | Rectangular | | UPC | 044459107132 | | Unit Count | 1.0 Count | ## Images ![WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714) - Image 1](https://m.media-amazon.com/images/I/71p2ODg1SxL.jpg) ![WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714) - Image 2](https://m.media-amazon.com/images/I/61Rg7Cs6cDL.jpg) ![WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714) - Image 3](https://m.media-amazon.com/images/I/71L3Y2qjFSL.jpg) ![WEN Magnetic Base for Dial Indicators, Three Segment, Industrial Strength with Quick Release (10714) - Image 4](https://m.media-amazon.com/images/I/61oOw2fR7TL.jpg) ## Available Options This product comes in different **Style** options. ## Questions & Answers **Q: are both rods 3/8?** A: Yes **Q: How do you zero the small inner dial?** A: The is no zeroing the small dial. There should be strain on the gauge, with the small indicator reading above zero, then set the dial to zero - then the gauge is zeroed to the thickness of the material used for the strain. **Q: What is the purpose of the round 'knob' the clamp? Not the handle that tightens the clamp but on the other end of that handle?** A: While it's a bit difficult to grasp what your asking, I'm assuming you mean the black junction partway along the swing arm (the silver but that extends laterally) If you're assuming the other two knobs manage pitch, yaw, tilt, and extension, you'd be correct. The last junction isn't wrapping the silver rod, however it may appear in the images. It bisects it. that's actually two silver rods, the end of each connect to the junction you're asking after: (| |) ========| |========= This give you a bit of leeway in the arm itself. Some give. Yanno, so the $300 Starrit dial indicator (one inexplicably has chosen to mount on a $20 Wen magnetic arm) isn't mangled by the angle of the dangle if your test setup gets rearrangled. The knob basically extends a threaded rod through the cap and exerts force on the opposite side, making it rigid and increasing the accuracy of your measurements (typically up to a full decimal point 0.01 -> 0.001). ...at least, ostensibly that's how this is supposed to go. Again, though: $20. Wen. Made from the finest Chinesium alloys (the only "steel" this device has ever seen is spelled with an "a" and refers to the originator's patent application. Now, no offense intended here, but by virtue of the fact you didn't know this (not that there's any reason you SHOULD have; I'm not being judgy here, honest), then the level of accuracy this tool is capable of providing will almost certainly satisfy your needs. One you've gotten deep enough into milling/machining to CARE about that kind of delta (for woodworking even this is almost overkill; the dimensional instability of wood due to humidity alone cancels out anything at the tenth range), you'll have run into the issue and the solution organically. If this IS for woodworking, just get the dial indicator and some 123 blocks. Really the only practical application for it there is to ensure your blades are parallel to the miter slot on your table/bandsaw. I suppose you could use it to align a tormek perfectly square too, but if you're running a Tormek, again: you're prolly not LOOKING at these. **Q: For the manufacturer or seller - Why doesn't the needle point straight up when at zero?** A: It does the dial face is adjustable. I use precision devices constantly and my company has to calibrate them every 6 months and this is one product I've had no issue with ## Customer Reviews ### ⭐⭐⭐⭐⭐ Fits all your indactor needs and more. *by S***. on 8 September 2025* First, I already have many magnetic bases for Indicators. As a Union Trades Millwright, these tool gets used daily, doing turbine rotor lifts, pump shaft runout and much more. I have many Starrett bases as well as older Craftsman and others just to name a couple. I wanted another holder that had the fine tune adjustment up at the indicator clamp. This WEN mag base not only fullfilled that requirement, but exceeded my expectation with the many sizes and ways to clamp every indicator I have in my arsenal, but the many ways to adjust the indicator is outstanding. The magnet clamping force is really good. The size of the base is slightly bigger than a Starrett, but on par with many other makes. The mag V-groove is good and also has small flat edges along with another side of the mag base have flat edges for multiple ways of attaching it to different machinery shapes. The only slight downside would be that the on/off switch is sensitive and if slightly bumped could disengage. That is the only thing I could find to complain about. This is a very handy and versatile Magnetic base for all of your various types of indicators with a lot of adjustment that makes my work easier and faster. What a great tool. I will be buying more, Steve ### ⭐⭐⭐⭐⭐ Magnet Strength is good *by M***N on 17 January 2026* Great price and works good. A fragment of the cost for expensive bases. Magnet strength is good. ### ⭐⭐⭐⭐⭐ Solid and works *by N***G on 13 August 2025* Solid when tightened. The magnetic switch won't hold on bad surfaces but held perfectly strong on the flat steel of a brake rotor. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.pt/products/771936045-wen-magnetic-base-for-dial-indicators-three-segment-industrial-strength](https://www.desertcart.pt/products/771936045-wen-magnetic-base-for-dial-indicators-three-segment-industrial-strength) --- *Product available on Desertcart Portugal* *Store origin: PT* *Last updated: 2026-05-13*