Orange Rubber Impeller, 7.0-8.0 kg, To fit Indesit Hotpoint Swan Tumble Dryers

Our Indesit Tumble dryer drain water pump stopped pumping. I checked what the cause could be on YouTube and Google I decided it needed a new pump. But these were over £25. I read on one site that the problem could be the rubber impeller breaking up. I removed the pump from the water tank and held it carefully while running it. It wasn’t pumping and I could see the old impeller not turning as the hole in the centre was worn. After ordering the new impeller and fitting it the pump worked perfectly, for just a few pounds.

Such a good lil thing

Works perfectly. Fast delivery

Delivery date was by 27/02/21 but arrived 01/03/21Part a bit smaller than old one but is working fine. Fairly easy to fit

If you have an error on your Hotpoint dryer coming up ‘H2O’ which basically tells you your water reservoir needs emptying but in reality your reservoir is empty. Then the rubber imperler may be broken which is situated at the back of the machine in the pump unit. It’s a very easy fix.

Did a good job

Its keeping our tumble dryer going. Pleased with it. A cheap fix, plenty of videos on utube on how to fit it.

Could have spent around £27 on a new pump or around £100 on a repair person or even buy a new condenser dryer because the water light was staying on and dryer not working even though Tank was empty.Couple of videos on Internet and a search on amazon to find this part led me to repair the machine myself for a few pounds and less than 30 minutes of my time.Was relatively easy to replace the perished impeller.