0.3mm Ultra Thin Self-Adhesive Optical Glass LCD Screen Protector for Fujifilm X-T1 Camera

It feels very solid and easy to put on and remove if needed. My only issue is mine came without plastic protection on the outside (blue marked #2 film according to the instructions) and clean wipe was nearly dried out. The screen was noticeably scuffed in a couple of spots. Scuffs were very small but it's just not worth the hassle to return it. I would still recommend this but be sure to check you have protective film on both sides of the screen protector before you begin.

I will give this 5 Stars even though I got it few days ago and can't comment on durability or how long it'll last. But if there are any problems I'll change this review. So if you see this review's been here for a while that means the product is still serving me well :)So I got the model designed for my Fujifilm X-T1 and it fits perfectly. It doesn't protrude anywhere and you wouldn't guess anything extra is attached to the LCD. It is very clear and I couldn't tell the difference in image quality with/without. Once I attached the protector to the LCD I had bubbles in the center so what I did was I lifted a corner of the protector peeling it half way, and then pressed on the area right before the bubbles with my finger pushing outwards as I was putting the protector back in place. I did this a few times, I think like on the 3rd attempt it worked. I think it's just how it works as you have to get two flat surfaces to align completely. There are no bubbles at all now of course!Another suggestion I have is, use one of those air blowing thingies like Giottos to make sure there're no dust particles on the camera right before you apply the protectron. There's a liquid cleaning tissue included in the box, but after you use it you still need a soft dry cloth to wipe off remaining streaks. The ones for eye glasses are best.Yet another suggestion is while you apply the protector it's useful to view an image, something bright colored. Because as you're placing it you only have the edges of the LCD as a guideline, this way you'll have the inside as well. When the screen is dark it's hard to see the alignment. Once you've aligned and applied it however, switch off the LCD, because if there are any bubbles they're best seen when LCD is dark.Other thoughts:I had a glass protector on my older X-E1 (forget which brand) and when I came back from a trip it had a crack. Typical crack you see on dropped phones (whole thing smashed). Everyone thought it was the camera, because I kept it on to prevent further damage. Then when I got a replacement I simply lifted the cracked glass protector and LCD underneath was like new. So I figured I'll buy only glass protectors from now on. I'm not one to pamper my cameras, and I use 3rd party batteries, but LCD is a usable component, and if it gets scratched up, it deters from usability as it gets harder to see finer details. And of course that crack on X-E1 would probably be the actual LCD instead of protector screen.EDIT:So I've used this thing for a year now and the main viewing part is free from scratches. Around the edges the glass is cracked a little, but that's protector doing the protecting in action, otherwise the cracks would probably be on the LCD. But the protector itself is sticking strong, and not peeling off. And there are no bubbles. Great job you guys, and you should put up good quality picture of the box it comes in, it'll give you more attention trust me. Unless you want to surprise people... Ok I'll spoil it, it looks like some pro techy gadget :)

Great looking product for sure. Glass is top-notch and there is absolutely no difference or dip in quality of what you see on the LCD. My only grumble is that the edges of the glass are not rounded and are fairly sharp. I have yet to cut myself on the edges, but I'm betting it'll happen eventually.

I bought this for my X-T10 because the screen size is the same as X-T1. Only the central portion of the protector bonded with the LCD screen. No bubbles, but a very large dark area in the center of the protector where it DID bond to the LCD screen. Unusable. Tried to a couple of times in case I did something wrong but it just didn't bond fully. Very disappointed in the product. Mine seems to be a minority experience though judging by these other reviews.

I've gone through 2 other brands of screen protection both film-based and tempered glass type before finally finding the Larmor. It does exactly what it should and exceeds my expectations. Once the Larmor is applied, you don't know its there. The blacked-out edge aesthetic blends right in unlike the ACMAXX Armor Protector and its ugly reflective edge. Also, the Expert Shield lasted a couple of hours. I removed my camera from my bag; the corner caught on the interior fabric and the film came off quicker than I knew what happened.

Installation is a breeze. It fits X-T1 perfectly and is crystal clear. Once it's on, you can't tell it's there.I've never been patient when applying film screen protector and always botched it up. But THIS is a piece of cake. It comes with a cleaning wipe. Even though I managed to leave a couple of tiny dust particles on the screen, they aren't visible until the screen is tilted at an angle. Totally worth the money!!!

Nice quality but very sharp corners.. Can cut your hand, must be very careful. I contacted Larmor, they said they corrected this in the new version. No offer to replace. Poor Customer Service. Disappointed.

It is clear, easy to apply, fits perfectly, easy to clean, have not noticed any glare issues, and I assume protects the screen well. Only very minor downside might be the edges and corners are sharper than a the plastic or other types of adhesive screen protectors but it's not glass shard sharp and hasn't hooked or snagged any fabric. The screen on my Fuji X-T1 looks great! Seller sent quickly too.