Winsome Satori Saddle Seat Bar Stool, Walnut, 29" | Classic Backless Bar Chairs for Kitchen & Dining Room Seating, Timeless Essential Furniture for Home, Dorm, Apartments

I bought two of these stools after reading many reviews so I was already aware I may be headed for the allen wrench buyer's remorse. But thankfully at least one reviewer gave good instructions along with the recommendation to toss the allen wrench that comes with these stools, and to get a ratcheting wrench. Well, I didn't have one of those, so I just dove in, spent at least an hour an a half on the first stool before my hands gave out, and a couple days later I mustered up enough guts to tackle the rest of the first stool. Took at least 3 hours total, and felt totally wiped out after the ordeal. The stool itself turned out great, and seems very sturdy. It's hard to see anyone disappointed with this stool except for the effort with the allen wrench. I did not have trouble with screws stripping. Then I reviewed ratcheting wrenches and ordered this set on Amazon: Tonsiki 53PCS Multifunction Hex Screwdriver Bit Set, Including 1/4 Inch High Torque Ratchet Wrench Drive, Magnetizer, 1/4 Inch Socket Extension Bit Holder, with 50PCS Screwdriver Bits Sold by: Tonsiki I just received the set today, and went right to work with my new tool. Long story made shorter - start to complete finish and cleanup, the 2nd stool only took about 35 minutes. I felt invincible! SOOoooo much easier and fun! So this is ending up a thumbs up for both the stool and the Tonsiki 53 pieces multifunction hex screwdriver bit set. Good investment, as I know I'll meet up with another allen wrench project sooner or later, not to mention so many other projects where there is very little room to navigate with my power tools. Thank you for the helpful reviews that got me through this project. The bit of extra money for the Tonsiki combined with the terrific price of these stools completed a project that was waiting far too long. The wood and finish of these stools is just beautiful, exactly the walnut color I was looking for, seems true to the product descriptions.

The following review summarizes the stools very well. It was extremely helpful with assembling. Let me start off by saying these bar stools look and feel very, VERY nice when they are finished. They are incredibly sturdy and I have no doubt they could survive an extremely long time and hold very heavy weight. As many other reviewers have noted, the assembly is a PAIN... with what they provide you in the box, that is! This is the only reason I did not rate these stools 5/5 stars. Here are some tips on what we did when assembling the stools that made them 1000x easier to put together: 1. Toss the allen wrench they provide you into the trash immediately. Don't even look at it, unless you feel like stripping the screws right off the bat. 2. Have a small ratchet, some wood glue (or normal school glue even), a microfiber cloth and a hammer handy. You will need to attach a 4mm hex bit to the ratchet for the screws they provide you (and yes, you CAN use the screws provided! They are good quality, although we are still unsure why they give you galvanized Tapcon screws intended for outdoor cement work... they're not cheap to produce!) 3. Assemble both the legs like Figure 1 in the instructions before you being to screw in the screws. Make SURE you use the correct pieces of wood in the correct holes (shorter cross piece goes in the lower hole, each side should have a long leg piece with a dot and a leg without a dot at the top) as well as the correct length screws (short, for this part). 4. When screwing in the screws, go slow and steady; do not apply too much force/torque at once or you WILL STRIP THE SCREW! Fortunately, if this happens (and you are not too close to the end) you can unscrew them out and use a replacement screw they provide you. With the ratchet, it is very easy to get the screws in quickly while not stripping them. Do the same process for the long screws for the seat. 5. When you finish assembling the body of the chair (including attaching the seat), choose a side of the stool you want to face the wall (in case you make a mistake on the first couple of cover pegs). Put a small glob of glue on the flat side of the wooden peg and put it in one of the holes on the side of the chair that will face the wall. Press it in as far as you can, then cover the peg with a microfiber cloth. Take the hammer and LIGHTLY tap it in, checking every once in a while to see how far down it's gone. If you hammer too hard or too deep, the peg will go too far in and splinter the wood surrounding it. Use the microfiber cloth to wipe up any excess glue and it won't leave residue on the chair. Hope this helps everyone! I am also attaching a picture of our stools in customer images.

Let me start off by saying these bar stools look and feel very, VERY nice when they are finished. They are incredibly sturdy and I have no doubt they could survive an extremely long time and hold very heavy weight. As many other reviewers have noted, the assembly is a PAIN... with what they provide you in the box, that is! This is the only reason I did not rate these stools 5/5 stars. Here are some tips on what we did when assembling the stools that made them 1000x easier to put together: 1. Toss the allen wrench they provide you into the trash immediately. Don't even look at it, unless you feel like stripping the screws right off the bat. 2. Have a small ratchet, some wood glue (or normal school glue even), a microfiber cloth and a hammer handy. You will need to attach a 4mm hex bit to the ratchet for the screws they provide you (and yes, you CAN use the screws provided! They are good quality, although we are still unsure why they give you galvanized Tapcon screws intended for outdoor cement work... they're not cheap to produce!) 3. Assemble both the legs like Figure 1 in the instructions before you being to screw in the screws. Make SURE you use the correct pieces of wood in the correct holes (shorter cross piece goes in the lower hole, each side should have a long leg piece with a dot and a leg without a dot at the top) as well as the correct length screws (short, for this part). 4. When screwing in the screws, go slow and steady; do not apply too much force/torque at once or you WILL STRIP THE SCREW! Fortunately, if this happens (and you are not too close to the end) you can unscrew them out and use a replacement screw they provide you. With the ratchet, it is very easy to get the screws in quickly while not stripping them. Do the same process for the long screws for the seat. 5. When you finish assembling the body of the chair (including attaching the seat), choose a side of the stool you want to face the wall (in case you make a mistake on the first couple of cover pegs). Put a small glob of glue on the flat side of the wooden peg and put it in one of the holes on the side of the chair that will face the wall. Press it in as far as you can, then cover the peg with a microfiber cloth. Take the hammer and LIGHTLY tap it in, checking every once in a while to see how far down it's gone. If you hammer too hard or too deep, the peg will go too far in and splinter the wood surrounding it. Use the microfiber cloth to wipe up any excess glue and it won't leave residue on the chair. Hope this helps everyone! I am also attaching a picture of our stools in customer images.

Great looking stools. Very sturdy. The low price compared to similar stools you'll find at brick and mortar stores like AtHome is just gravy on the biscuit. Assembly is easy, but do yourself a favor and listen to the review of "Justin and Danielle" that advises you to throw away the Allen wrench and use a ratchet. I didn't heed that advice at first. I thought surely I could put a simple stool together on my own. Without leaning on wisdom from a stranger on the interwebs I couldn't even prove existed. And, the truth is, I did fine on my own. For a while. Then on the third leg I tried to install, I ran into the problem others have talked about. I couldn't fully tighten the screws without starting to strip them. My first reaction was to try and fix it on my own. I figured I'd spend a few bucks on some old fashioned Philips head screws to replace the ones that came with the stools. I made a trip to the hardware store to buy the screws, but they didn't have any that were the right size. I had hit rock bottom. I was ready to give up. Ready to ship back my beautiful 29-inch Winsome Wood Saddle Seat Stools, and go spend almost twice the money to buy an already assembled version from AtHome. Then I remembered a review I had read on the internet before purchasing the stool. A review from "Justin and Danielle" that mentioned the problem was not the screws, but the provided Allen wrench. I was skeptical, but why not throw up one last hail Mary? What did I have to lose? So I made a trip to my toolbox and busted out a ratchet with 4MM hex bit, just as "Justin and Danielle" had suggested. Within minutes, I had completely finished assembly on both stools. What I couldn't do in an hour using my own wisdom was done in minutes once I leaned on the wisdom of "Justin and Danielle". I learned the hard way not to doubt "Justin and Danielle". Don't make the same mistake I did. Trust "Justin and Danielle" right from the start. Go read their review for yourself. Follow their instructions. Take it from someone who has been where you are, following “Justin and Danielle” is a decision you will never regret.

The saddle seat is awesome and it was easy to put together. Looks really nice in the room. I would recommend it.

i recently purchased the Winsome Satori Counter Stool, 24", Walnut, and I couldn't be more pleased with my choice. This stool has truly exceeded my expectations in every way, and I am excited to share my experience with others. First and foremost, the design of this stool is simply stunning. The walnut finish adds a touch of elegance and sophistication to any space, seamlessly blending with various home décor styles. The saddle-shaped seat is not only visually appealing but also incredibly comfortable, providing excellent support for extended periods of sitting. The build quality of the Winsome Satori Counter Stool is exceptional. Crafted from durable solid wood, this stool is built to last. The sturdy construction ensures that it can withstand daily use without any signs of wear and tear. Additionally, the crossbars on all four sides add stability and serve as convenient footrests, enhancing the overall comfort and functionality of the stool. One of the standout features of this stool is its versatility. It fits perfectly in my kitchen, providing a comfortable seating option for meals and casual gatherings. It also works well in other areas of my home, such as the living room or bedroom, where it serves as a stylish and practical piece of furniture. The compact and space-saving design makes it ideal for smaller spaces, without compromising on functionality or style. Another aspect that I appreciate is the ease of assembly. The stool comes with all the necessary hardware and clear instructions, making the setup process quick and hassle-free. Within minutes, I had the stool assembled and ready to use, which was a pleasant surprise. In terms of comfort, the Winsome Satori Counter Stool does not disappoint. The saddle-shaped seat is ergonomically designed to provide optimal support and comfort, even during long periods of sitting. The height of the stool is perfect for my counter, allowing me to sit comfortably without feeling too high or too low. Overall, I am extremely satisfied with my purchase of the Winsome Satori Counter Stool, 24", Walnut. It combines style, durability, and comfort in a way that few other stools can match.

Easy and straightforward to assemble, nice even black finish all around that is both smooth but also shows off the grain which is very appreciated. Very sturdy and well held together when assembled, nice comfortable curvature if youre used to this type of stool. Only wish it came with some protective feet pads for the bottom, but otherwise a great price for a fantastic product.

I WANTED TO LOVE THESE STOOLS! I really truly did. I hoped that this time, I wouldn't be disappointed by cheaply designed furniture like this. Alas, I should have known better... It amazes me that these stools have been given such good reviews. Here's the breakdown... PRO It's solid wood (its a stool though so, I should HOPE so...) Nice glossy finish Would be incredibly sturdy... CON Would be incredibly sturdy IF you can get them put together! The achilles heel of these stools is that the company decided to save a couple bucks by sending cheap hardware to assemble it with. The holes that are pre-drilled are NOT all properly drilled. Many of them are too small, or too shallow, which forces you to drive the bolts BY HAND with the hex wrench they supply, OR, to suffer the laborious task of RE-drilling the holes that aren't properly drilled, as you come across them. This is a STOOL. Its maybe 1.5 feet wide at its greatest point. WHY do these things need to be shipped in a 5 inch wide box with a dozen screws? I get the idea that it would be easier to store these things in a warehouse if they packaged it unassembled, but it takes one person to hold the legs in place and another person to drive the bolts into position, and it literally takes 45 minutes per stool because the hex wrench is too long and so you cannot simply keep turning the wrench until the bolts are tightened. You have to continuously place the wrench into the bolt, turn the bolt a half an inch, when the long end of the wrench hits to bottom of the seat you must then pull the wrench out, reposition the wrench, turn the bolt another half an inch, pull the wrench out.... jesus christ! WHY must I spend 2 hours putting together three stools?! I'd gladly have paid an extra ten bucks a piece to have these sent to me ASSEMBLED. So after stripping not one, not two, but THREE bolts, despite taking every bit of time and caution I could muster... I was forced to call amazon, request a refund for the two stools that were still in the boxes, and explain to the lady that as much as I would love to return the other stool, the only way I could possibly fir it back into the box would be to break it into pieces. Now I must go to walmart or target and hope that they have stools already assembled so that I dont have to go through this crap again. Lesson LEARNED and thank you amazon for handling the situation so well. Ill never make this mistake again thats for sure.

It is a good bar stool. After assembly, it looks very solid and stable.

Excelente producto y fácil de armar! Muy bonitos!!

Very comfortable. Bought so i can sit to prepare food.

My only complaint: this is the first "used" item I've bought from Amazon -- there were no instructions. If this is normal, I won't be buying anything else 'used'. Fortunately, the stool was fairly easy to assemble using common sense, but this isn't always the case, particularly regarding the best order of assembly. So, no more "used" items for me. The 4 stars for 'Easy to assemble' should perhaps be 5: it was easy, but I had a hard time tightening the seat screws, even using pliers to turn the key. However, the 'acceptable' condition was more than acceptable: like new, except for a small chip & a hardly-noticeable scratch. It's well made & very sturdy, & looks great. It's too big for where I'd planned to use it -- in my tiny kitchen, where I need to sit down frequently. (Foot-spread measurements from all manufacturers would be a good idea?) But I've found another home for it, & am very pleased with it. An excellent product.

Love this! Takes a bit of time assembling but instructions are clear and not complicated to do.