ACDelco Professional 18K1014 Front Disc Brake Caliper Bolt

Great product good price

2002 Tahoe LT 5.3 - Was reading where so many folks had issues removing the T55 Torx bolts and although I have all the right tools and then some, I didn't think the Torx would be so bad. It was unreal how difficult they were to remove but I succeeded and without stripping the heads. After the brake job, I accidentally came across these Delco 18K1014 Caliper bolts in the AC Delco on-line catalog. They are the second to last item listed under the Front Brake Hardware subgroup. Peace of mind for under $8.00 per set!I ordered three sets just to have two extra bolts. What I like is that they appear to be a high quality machined bolt that can be installed and removed without worry via an 18mm bolt head. Goodbye Torx! What I do not like is that they are clearly labeled Made in China, they have a brass type plating and not sure if they are stainless like the originals.These bolts fit perfectly right out of the package. Some here complained that the bolts are too long and my guess is that the rubber guide bushing that sits all the way inside of the Caliper is the culprit by not allowing the pin end of the Caliper bolt to slide into it properly. This would cause the bolt to appear as if it were too long because it can't seat all the way into the rubber bushing. Makes sense that Delco would provide two of these bushings in the package.

I think the headline says it all. the Torx head bolts that came with the vehicle ('01 Tahoe) were a pain in the ass to remove and caused me to break several tools (impact rated even). These were a no-brainer once I was able to get the Torx bolts out.

fit like a glove, had my calipers working in a hr.

perfect Real Good Material Highly recommended for gm suvs, The factory torx Bolts will Rust and become a problem to remove. over time so replace them now while you still can.

Must do mod for 2006 Suburban, get rid of factory bolts with torx T55 head

These are much better than the OEM ones. Easier to remove when replacing the brake pads.

These perfectly replaced my original T55 Torx front brake caliper pins on my 2001 Chevy Suburban 1500 LT 4WD. Head uses 18mm socket. Be careful not to strip those Torx heads getting the originals out. I lubed the smooth part of the pins and used Loctite 242 on the threads.

Fit perfectly

Replaced those horrible hard to remove Torx Head Caliper Bolts.Got tired of buying T55 bits.These Solved That Issue

Much better than the hex or torque heads which strip so easily, A-1 design

Get rid of those torx botls (they WILL strip) and get these to replace them. Will make removal much easier next time.

Perfect fit no more rattling