EcofanBelAir, 806CABBX, Low Temperature Heat Powered Stove Fan, 140 CFM, Gold, 9"Blade

I simply love these little things. I have a small propane stove in my family room that sits close to the stairwell leading up to the kitchen. Before buying two of these fans the heat went straight up to the kitchen and left my downstairs family room cold. I bought one and found that it wasn’t quite enough to circulate the air so I bought a second one and together they circulate the warmth throughout my 900 square-foot family room. I love that they simply run off of the heat generating from the stove and there is absolutely no sound when the fans are running. They even fit in nicely with my farmhouse rustic industrial motif. Highly recommend!

I have the 812 model. It's pretty good. This one (BelAir) is so much better for the money. I can feel the difference in the air movement with my hand. With the 812 model......I know it works because we blew cigarette smoke into it. But you can't necessarily feel the air movement. The BelAir is definitely moving much more air. If you've got the money for the 812 model.......you probably have an extra for the BelAir. Go for it. In my opinion....it's worth it! It just works! It works good!

Solid, durable, easy. Works on gas stove insert, but probably not as well as on a free standing gas stove. Not a lot of surface area with a fireplace insert. We were able to turn it a little to provide more heat to the rest of the house. It does function and provides some circulation and we knew it might not be optimized for our application. However, it will provide some circulation during a power outage. This was a primary consideration. Overall we are happy with it.

Did not seem to circulate air at all, for the price we sent it back and are going to buy a lasso tower fan to put behind our propane stove, way cheaper and we can use the fan in warmer weather also

I've had this fan for 4 years. Works well. However, in the second year, it started rattling, due to a loose screw on the mounting frame that screws the blade to the body. I've tightened it (not overnight!) a few times since then. Last year, the screw head broke off mid shaft. I looked at it, and it is a VERY soft screw. There are ways to remove this very small screw shaft (possibly), and replace the screw, but it would require tool attachments that I don't have. And, I'm not sure the threads would really remain intact. So, I am listening to it rattle all winter. I am faced with throwing this whole thing in the trash (can't recycle) and buying a new, quiet one, or putting up with the noise until the remaining screw breaks. It is hard for me to put this large and expensive piece of metal in the trash because of a 1-cent screw.

I highly recommend the Ecofan Belair heat-powered stove-top fan for use with a gas powered heating stove. It is extremely quiet and efficient. It helped raise the room temperature by 3 degrees in about a half hour, from a cold start. Additionally, when the stove (whch is automatic on/off) shut off, the fan continued to run--moving residual warm air from the stove--for another 30 minutes!! That was totallly unexpected, but MUCH appreciated. I believe it will enhance my stove's ability to keep my house warm during a power outage--which is very important to me. Great product with a 2-year warranty!!

The media could not be loaded. With same base temps on gas stove the 806 showing close to 1.3-1.5 revs for each 1 the 810 takes.

I've used a wood burning Ecofan designed for free standing stoves for several years with limited success because I have a insert. The insert does not get as hot as a free standing stove. After checking the temperature on top of my stove for about a week, I found a spot that never gets above 392 F/200C which is the max temperature for the Belair. The Belair works great vs. the old fan that just never got hot enough to max its spin. I'm using the old fan on my shops free standing stove. Now my insert has a blower fan, so I primarily use the Belair as a visual aide to know if the temperature warm enough from across the room. The blades are black unlike the old fan so I put a dot of white paint on the ends of the blades.

The fan on my propane stove was very noisy so I got this fan. It works better then the stove fan by far! You can feel how well it distributes the heat right away. Totally worth it and I'm sure my next hydro bill will be a little less.

Works well as described

天板温度80度、全面扉温度200度の状態で、ソープストーンの天板で十分回っています。ファイヤーサイドの駒ヶ根のショップでは「ソープストーンの薪ストーブでは・・・・。」といわれたのですが、天板温度が80度ぐらいで必ず回っています。（「あれ？回らない？」と思っても、ちょっと羽をさわってあげると回り始めます。）ただし、サーキュレーターとして利用を考えているのなら、扇風機の方がはるかに効果があります。（ストーブのアクセント・装飾品としてであればお勧めです。）HETAの薪ストーブ輸入元であるファイアーサイドの製品ですから安心感もあります。

The fan on my gas stove gave out. I placed the Ecofan on top of the unit and it’s been circulating the heat in the rec room just fine. It will do the job until I can replace the fan. I don’t have to rush now.

送風は期待しないほうがいいでしょう。でも、湿度はしっかり拡散してくれます。買って損なし。