Mission Console Table, Solid Wood, 1 Storage Drawer, Bottom Display Shelf, Narrow Depth, Easy-Assembly, For Living Room/Hallway, Russet, 30 in L x 10 in W x 28 in H, 9057-RS

This is a well-made table that looks good against my window and comes about even with the sill. I'm using the table for some large plants. The color in the listing is accurate and is a reddish stained oak. The construction is solid oak where it matters (top, legs, drawer fronts). Other parts are veneered plywood (parts of the top section) or veneered mahogany (lower shelf). Table came packed well in four sections (top with drawers, bottom shelf, and two sides), but in lots of Styrofoam. Assembly was very easy. I suggest leaving the screws slightly loose until setting the table upright on a flat surface before fully tightening. This helps the table to sit flat but I still had to remove one nail-in plastic foot and add a thin washer over the nail so it wouldn't wobble. Putting weight on the table also helps. I am very pleased with this table and the value seems great, although not made in USA.

This is a beautiful table that is easy to assemble. The construction is very solid. Once assembled, you would never know that it was delivered in pieces. It looks like a fine piece of furniture. We use it as a TV stand and appreciate that it is narrow and fits our space well.

I can't say enough about this Hall Console. It is well made, beautiful finish and sturdy. It is a perfect fit for my small hallway. The most important fact about this console is, it comes full assembled. All you have to do is take it out of the box and place it wherever you want. I feel a 5 is not good enough I would have given this a 10.

This is a sturdy product with solid wood legs and wood, not particle/veneer, construction. It will easily support the weight of a large TV. Mine is a 55-inch diagonal and it just barely fits on the table top, so measure-measure-measure-! It is nicely finished and comes with the carcass already assembled. All you have to do is put on the legs and bottom shelf. It's one of those that uses screws and Allen keys. You can assemble it with what comes in the box, no extra tools required in less than an hour. The only reason that I gave it 4 overall stars was because whoever assembled the carcass put the drawers in backwards (left one on the right side and right one on the left) and I just haven't had the time to figure out how to release the drawers from the drawer slides to sort them out. Good value for money. An 8-year-old could put it together with no help.

So cute!! Perfect to fill a small space in my foyer. Easy to assemble. Top and bottom shelf for an accent lamp and or decor. A drawer for storage.

This is a very nice table made mostly of solid wood with veneered plywood only for the drawer bottom, shelf, and back panel.The frame is well constructed with good bracing on the inside frame corners making it very sturdy. The drawer is solid wood everywhere except the bottom and while not dovetailed, is still quite well made. It is big enough for half a dozen remotes and other stuff like glasses, phone, flashlight and some papers. The table top, 3 exposed sides, drawer front and legs are all made of perfectly finished solid wood. The solid wood legs are attached with 2 machine screws on each, going into properly placed threaded inserts in the frame. This makes the assembly very strong. The veneered plywood shelf is notched on each corner to fit exactly within the legs and is supported by 4 metal push-in standard shelf supports. The 1/4 inch holes are predrilled in the corner of each leg, so moving the shelf higher would only involve drilling 4 more holes. When the easy assembly is finished, the table is attractive, very solid and strong. The nice finish showed good oak grain detail that I would describe as "medium" dark oak- darker than our "Honey" oak floors but very attractive next to the Cream colored leather sofa. While not sold as a chairside table it can become one by cutting a few inches off the bottom of the legs. Since the legs are not tapered it is easy to do. When I did this it became the perfect height to fit between our couch and my chair. One fairly small negative is the back plywood panel on our table showed some delamination which was only visible from below and was easily fixed with some Glue and a clamp. Even with thatsmall negative we are very pleased with the overall quality of this table and rate it an excellent value for the very reasonable price.

Gorgeous piece of furniture. It wasn’t easy finding a table that would fit in the 10-inch recess of our entryway and even harder to find something of good quality. This beautiful table checked both boxes. Solid hardwood with a satiny smooth finish. Not a single scratch or dent. The instructions were clear, assembly was quick and easy. I couldn’t be happier with this sturdy yet stunning table.

Excellent product! Beautiful wood and easy to put together

This table is beautiful. Small true but fits great in those smaller areas. I put a silver lamp and my black chiming clock on it....sits in the corner of my LR....I use coasters on all my LR tables so hopefully the top does not end up scratched. I am still thinking of ordering one more of the side tables, either in the round (have one already and love it) or in the rectangular, just with the lower shelf.....almost wish there were a small coffee table to match, as looking for something in front of the couches and looking at small ottomans....just haven't made up my mind yet....but love that these tables are solid and wood. No regrets here.

Exactly as pictured. Small but pretty. Nice it was all assembled and it was packed very well.

LOvely table. Very sturdy easily assembled and very nice finish I have 2 wedge shaped leick end tables and this item nicely rounds out my setting

It's a beautiful piece of furniture, looks oak, sturdy and easy to assemble...no tools required Very happy😁

Great table - easy to assemble, looks excellent. It's not perfect but considering the price and all wood material it's really very good.