Danner Manufacturing, Inc., Replacement Impeller Part 12585 for Pump Models 02517, 02527 or 40127.

This was perfect. It was what I needed to fix my submersible pump.

For some reason, the tiny "wings" broke off my Impeller. I took a chance and bought this part and it worked.

Replaced existing impeller and pump work well again.

After reading that this impeller would work with my discontinued Model 6 the order was placed and received the next day. Installation required a bit of fitting though. In the arrived configuration, 3 metal bushings on the outer end of the shaft, one on the inner side, the impeller would interfere with the body of the pump and not turn with electric applied. I discovered this after several disassembly/reassembly attempts and finally began swapping positions of the metal bushings, one at a time, until the impeller would freely turn. Final reassembly and application of electric and the pump was working, water once again flowing at the fountain. If you have a Model 6 and it's not working on initial installation, consider this adjustment to the impeller before you throw up you hands in despair. PS, hold onto the metal bushings for your old impeller should you need them.

The quiet motor and the ability to replace the impeller when it gets worn from use instead of buying a new pump

When I switched off my pump it was really difficult to get it going again without a lot of shaking and banging. This new impeller fixed the problem completely. Who knew? :-)

Fits the Size 7 perfectly and was a lot cheaper than buying a new unit. One of the shims was missing on mine and making quite a lot of noise. It took me a few minutes swap out this replacement and it was running as good as new. Save some future headache and buy an extra one; they don't spoil and always seem to have problems at the most inopportune time.

If you are not a tech person, don’t be afraid to swap this. It was four philips, pull out the old, pop in the new, put screws back in. It took me one minute. It also came in less than 18hrs

No surprises here, its is what it says it was and is pumping water just fine

It was delivered quickly , and has been working fine from the moment I installed it

My pump was getting sluggish and wouldn't start again after the breaker would jump, unless I gave it a push. Changed the impeller and it's working again like before.

fits my danner mag 7

Just what was ordered. Glad to get it