• Latching LED, a red LED flashes until reset for quick, clear identification of the initiating smoke alarm in an interconnected system.
• Visible low battery indicator, helps locate chirping unit.
• False alarm control quiets unwanted alarms for up to 15 minutes.
• Interconnects with other Firex smoke alarms and heat alarms compatible with other contractor preferred Firex products.
• Front loading battery door makes battery changing simple and power link tab makes installation faster and easier.
• ›See more product details.

Kidde hardwired smoke alarm. .com ---- The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm offers many benefits for installers and wners, such as its easy-access slide load front battery door. This alarm is powered by your home’s electricity and will interconnect with other smoke alarms in your home. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Interconnectable for Improved Safety Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the site is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes. You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system. Interconnects with Other Devices Interconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality. Trademarked Hush Feature for Convenience By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every 8 seconds while in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset after approximately 8 minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period. Reliable 9-Volt Battery Backup, Indicator LED, and Test Feature Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn. The alarm’s standard 9-volt battery provides continuous protection against smoke and fire hazards, even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know that it's time to change the battery. The unit measures just 5.6 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It includes tamper resist features to deter vandalism or theft. This alarm is UL listed, so you can be confident of its quality, and it is backed by a 5-year limited warranty. About Kidde: A UTC Fire & Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004. What's in the Box One i4618 ionization smoke alarm with ing bracket and ing hardware, one 9 volt battery, a 5-year limited warranty and a bilingual user's manual. P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the Manufacturer --------------------- This Firex smoke alarm is the number one contractor installed smoke alarm. The Firex 4618 Smoke Alarm is an ionization 120V AC smoke alarm with battery back-up for single or multiple station use. It includes a False Alarm Control feature which allows the user to quiet an unwanted alarm for up to 15 minutes. The 4618 has a front loading battery door, 85 decibel horn, test switch and dual purpose LED indicator; constant green power on LED confirms AC power is present and the flashing red displays alarm/battery status. Our unique PowerLink Tab is designed to allow the smoke alarm to be shipped with the battery already installed. It keeps the door from closing until installation, which prevents the battery from draining prematurely. The installer simply removes the PowerLink Tab, closes the door and tests the unit. This results in a faster installation time. The latching LED feature clearly identifies the smoke alarm that initiated an alarm in an interconnected system with a constantly illuminated red LED. The LED will remain lit until the test button is depressed on that unit. This smoke alarm s to any single or 4 octagon junction box or square-to-round drywall ring and has 8 long pigtails with a Quick Connect harness for permanent connection. The 4618 interconnects with up to 11 other compatible Firex smoke alarms and as many as 6 Firex heat alarms for a total of not more than 18 interconnected devices. This Firex unit should be placed in single-family households or in each individual living unit of multiple-family buildings. See more ( javascript:void(0) )