Samsung Galaxy S3 Screen Replacement Kit including 1 Replacement Screen for Samsung Galaxy S3 9300 / 1 Pair of Tweezers / 1 Roll of Adhesive Tape / 1 Tool Kit / 1 ECO-FUSED Microfiber Cleaning Cloth Black AD

It's been 48 hours since I replaced my screen, and it seems to be working great. However, it did take a VERY long time to complete. My phone screen wasn't a simple crack; it was completely shattered. Took a couple hours of alternating the hairdryer and tweezers. The tweezers are surprisingly good. Very fine tips, and they match up very well. Mine was too busted to really utilize the wire technique, so I was stuck with tweezers and the plastic wedges. Use more heat than you probably think you need. It takes quite a bit to really soften the glue. After removing all the glass and glue, I used 70% isopropyl on the microfiber cloth to clean up remaining glue and the edges where glass attaches. This worked well. The new glass itself fit perfectly, and stays seated well with the tape that is included.Overall, I'm very pleased with the kit. It's all there, the tools are good enough quality to complete the job, and the glass itself fits and works well. Just be prepared for a long job if your phone is really busted and you feel the need to be very careful with the digitizer.

Great product. I bought this to revive an old Galaxy S3 given to me. The glass is quality - I dropped the phone with no case onto hard floor from 3 ft. after replacement and the screen was fine (I expected it to crack). Eco-Fused contacts you by email about the replacement process, order, and then follow-up. Great customer service. The instructional video is idiot-proof and comes with paper instructions (review all the instructions before replacing the glass!). It comes with more parts than needed so unless you break the screen (there is only 1!), you have enough to work with plus more for future maintenance.This is a meticulous process. I highly recommend a heat gun if you can grab one. I borrowed one from a family member and it took 3 mins tops to unstick the glue. A hairdryer will work fine as well. Be careful not to ruin your digitizer with too much heat!5/5 product and service.

Bought this to try and replace my S3 phone screen by myself as I had been quoted £150 in shops and it definitely wasn't worth the value of the phone which is nearly two years old anyway. My phone was really badly smashed, the glass was in thousands of tiny pieces across the phone and also all around the edges it had smashed into a dust so initially I thought it wouldn't work because it was such a complex break - but persevered anyway because the phone was not usable without a new screen.I followed the instructions really carefully and also watched the video (which is recommended by the seller in an email after you purchase). I used a hairdryer to heat phone, did it for about 10 minutes I then used the tweezers to try and pull some of the glass away. I wasn't worried about it getting too hot because everytime I turned the hairdryer off it cooled so quickly that it could never be getting that hot. After doing it for a while, I tried to loosen the screen but here i made a slight mistake because I thought that you had to remove the shards of glass (which i thought was the screen?!) but you actually have to peel away the backing which the glass is mounted on - this isn't made entirely clear in the instructions and I only realised after watching the video a few times. This was made easy with the tweezers and the wire as is done on the video, I got someone else to keep heating me with a hairdryer whilst I was doing it to keep it hot.**Once the screen was off you are supposed to clean the lcd with an 'alchohol based cleaner' which isn't provided in the kit to remove glue and dust**. I tried white spirit and nail varnish remover which didn't work - so resorted to straight gin which was the only alchohol I had. This worked well - but I think that there probably is something more suitable which you should buy at the same time as this kit. That said, vodka and gin would probably work just as well if you are ok to use it....Putting the glue strips on the phone is easy and placing the screen back on is pretty straight forward to put back on - the glue strips are really sticky and there's loads of tape left which may come in handy for something else! Unfortunately I didn't wait until the alcohol had evaporated off of the screen so i now have a tiny bubble of air/gin on my screen - but you can only see it when the phone is locked (not when the screen is on) and I really don't mind because the screen works perfectly otherwise. The buttons work, everything on the screen responds correctly and I am just so happy because I can now keep using this phone until it software eventually stops working. Saves me a few hundred pounds as I didn't really want a new phone yet.It's a risky, nerve-wracking process but if your screen is badly smashed then you don't have much to lose so give it a go!

Ce kit de montage très bien

So first off if your gonna get this kit you need to be very confident in yourself also to take in consideration THIS TAKES TIME! I spent about 3hrs on this, mostly taking off all the adhesive from the LCD once the shattered screen is off, the guitar picks or whatever they are weren't really needed their edges were to big to get under. The metal wire technique works great, it got stuck at a couple of cracks but I managed. The double sided tape works awesome as well, very sticky and theres enough tape for probably 20+ phones.The quality of the glass is good, no problems with it, still better than a shattered screen. one down fall is that after you take if the adhesive the screen is more sensitive to touch, if I tap, swipe , etc. Just a little hard the screen will freeze and I'll have to turn off the screen and back on, not too big of a deal to me.Screen replacement kit: 4.5 starOverall Process: 3 starAlthough it was a pain spending all afternoon replacing it id rather do it again than to spend over $100 for someone to do the same exact thing