IGAN-330 Flush Cutters, Precision Wire Cutter, Flush Pliers, Wire Snips, Electrical Cutters, Sprue, Side & Small Wire Nippers, Diagonal Cut Snips, Ideal for Electronics & Precision Cutting Needs

These are very sharp edged cutters. I don’t know if the steel is hard enough for steel wires. They work good on copper wire. I find them preferable as toenail clippers over purpose made clippers.

I bought these (have bought five so far) for Plastic model kit building. These cutters make wonderfully clean, flush cuts that need little sanding afterwards, and they are a great value too at only eight dollars. They are really nice and flush as they claim, which is better than some of the more expensive and popular flush cutters out there. I have to add a disclaimer though, as I use these for cutting plastic model kit parts from sprues, or cutting 3D resin printed parts from supports, these are excellent for that. They would probably be good for copper and brass wire as well. I would not use these to cut steel wire, steel pins, or anything steel really. They are too soft and brittle for this, and I learned that the hard way by trying to cut a steel clothing pin with one of these cutters and leaving a dent on the cutting edge, and breaking off the tip as well. Having said that these are still my favorite cutter for cutting plastic and have purchased at least five in the last few years to have around when I need them.

Nice and sharp. Clip through wire very well!

These flush cutters are very sharp out of the package, and work quite well. The handles and blades are one single metal piece and look very strong. The problem is the hinge spring which opens the blades back up after you cut. It’s a little cheap wire that’s just tucked into a hole in each handle. It falls out from the cutter if you look at it funny. This really doesn’t affect the cutter very much, all it means is that you have to open the cutter by hand after each cut, but I find that annoying. Otherwise, they seem to be nice, sharp, and sturdy for the very reasonable price.

If you're here for affordable side cutters / nippers for GUNPLA or other plastic minis... you're in the right place and can ignore the negative reviews. As of 4/12/25 almost every negative review is from somebody that didn't understand the use cases for this product and misused it. I won't exaggerate and call these fantastic, They don't cut as cleanly as a nicer set and can discolor the plastic, but they still work well enough to get the job done. *For those that don't know what GUNPLA/ or minis are; you're likely looking at the wrong product for your needs and should probably move on and continue shopping elsewhere. These are intended for plastic sprues and very thin and soft wire only. THEY WILL BREAK if used on any other materials.

Great precise close cuts :)👍

I bought these for trimming small wires and plastic sprues, and they’ve been great so far. The blades are super sharp and give a clean, flush cut without crushing or bending the material. I’ve used them on electronics, zip ties, and even some 3D printed parts—no issues. They’re lightweight but don’t feel flimsy, and the grip is comfortable enough for longer sessions. Just a heads-up: they’re not meant for thick or hard wires, so I keep them strictly for precision work. For the price, these cutters punch way above their weight. Definitely a solid pick for hobbyists or anyone doing light electrical work.

Very nice wire cutters small comfortable for little money I keep this one in my guitar case for when my I change strings.

Schneiden ganz okay, aber die produktions qualität ist kaum besser als die 1.50€ china knips. Meine haben in einer schreibtisch schublade nach 3 tagen angefangen zu rosten und sind außen recht scharfkantig. sowas darf

خامة متينه

These were a chance buy as they are cheap. It turns out that they are pretty good as a replacement of the supplied side cutters with my ender 3 pro. The only reason for 4 stars is because the number of times I've caught my index finger in the area at the top of the handles as they are just a little small. They've got good cutting power for their size and recommended.

I bought these for a rewiring project on my boat. I just spent four ten-hour days cutting wires and zip ties and these worked great. They went through 16 ga wire and zip ties like butter, and as the several puncture wounds in my hand, received from reaching blindly for them, will attest that they are incredibly sharp. I’m not sure how well they’d handle thicker wire, Or years of use, but they were perfect for the project I was using it for. Recommended. Update 20200920 - the other day I had to hack through several multi strand wires as thick as my little finger. It took a few snips, but went through it well. I’m still very impressed with these things.

Excelente compra! Estas son las pinzas de corte que estaba buscando. Para mis trabajos de electrónica. Es un placer trabajar con estás pinzas. Corte limpio y precisión. Las recomiendo!