Dive into Freedom! 🌊
The Scubapro Din Conversion Kit Universal allows divers to convert their first stage easily, ensuring they can use their own gear instead of relying on rental equipment. Compatible with multiple models, this lightweight and durable adapter is perfect for any diving enthusiast looking to enhance their underwater experience.
| Material Type | Brass |
| Color | Silver |
R**E
Fits my MK10 ScubaPro first stage
I wanted to swap from a yoke to DIN on my ScubaPro MK10. It fits the MK10 first stage perfectly! Great price for the conversion kit. No directions for installation, but the procedure is fairly straight forward (of course, you should probably take it to a qualified technician). Comes with an extra o-ring not needed for the installation. Probably an extra retaining o-ring.
T**M
Well made adapter
This one is half or less the cost of others and works well - recommend it to anyone needing to convert to DIN
D**Y
Doesn’t work on an Oceanic SP5
The threaded neck does not go down in far enough to seat the rubber O-ring against the regulator inside. I still gave it a five because it’s a great product
D**T
Fits Mk 20
I installed this on a Mk 20. As long as you can get the yoke nut off of the reg it's an easy install. An allen wrench and some vice grips. If you do a lot of these you can get a special socket that removes yoke nuts from scubatools.com.
J**R
Fixed my leak
I purchased a used Scuba pro Mk17, Din, first stage.Every time I attached it to a tank it would blow the O ring from the first stage. Sometimes it would hold for a while 5 min to 30 minutes then blow. I inspected the first stage and noticed the Din threads did not look very long. I then compared it to another reg. and noticed the connector was longer.The first stage had a 200 bar connector and my tank valves were 300 bar, so the threads were too short.I bought this adapter and solved the problem.I have no clue if it came that way from the manufacturer since I bought it used.
P**E
This part arrived quickly and works perfectly with my Scubapro MK25
This part arrived quickly and works perfectly with my Scubapro MK25. I had my local shop; Sea Level do the switch for me while performing regular maintenance.
L**O
First view
The container was open and broken, also missing O-rings!!!! Let you know letter about quality!
M**S
Quality Scubapro product!
I've been diving a yoke regulator with DIN tanks with DIN plugs in them for years. The DIN tank plugs always have o-ring blowouts, are the wrong depth, or don't seat right, etc.I was elated to be told that this was an option! Have this installed by a scuba shop, odds are they will charge $0-15 to do it, as it only takes them 5 minutes. It takes a torque wrench, a special narrow wall socket, and some gumption to do it yourself.
Trustpilot
1 week ago
1 month ago