Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut

Let me start by saying I bought a crappy router set when I started woodworking with the plan of upgrading the bits to the better quality version as they wore out to spread the cost out over a longer length of time. Well it just so happens that my first few replacements were replaced with Freud bits. Im not a brand snob, I usually look for quality and price that match with reviews and Freud fit the criteria for my first couple bits. I've really had no problems with the Freud bits i've bought. They're solid bits. But now it was time to upgrade my crappy straight flush bit and this time I decided to go with the Whiteside. I used it for the first time the other day and WOW. This is the most smooth, sharp, quality bit I own. It cut through my project like butter and left a silky smooth finish. I had pretty high expectations for this bit and it blew those expectations out of the water. Im highly considering just making all my future upgrades Whiteside bits. Seriously, I dont see how anyone can give this bit anything less than 5 stars. A++ bit

This bit is extremely sharp and cuts effortlessly. I bought it specifically for using on a table mounted router for routing using templates. With it being an upcut bit, when it is mounted upside down on a table mounted router it tends to pull the work downward. The spiral cutter pattern naturally tends to draw the work into the bit until the bearing makes contact with the template. I've always used template router bits with straight cutters which chip away at the wood. With those types of bits, I've always had to carefully trim away most of the excess wood before mounting my template in order to help prevent tear out and end grain blowouts. Not with this spiral bit! My first test cut was a 6" interior hole that I needed to cut out of 3/4" pine using my template I had already made. I drilled a 1/2" hole inside the area I needed to cut out and tried cutting the 6" hole without using a scroll saw to cut away the bulk of the material first like I normally have to do. I was able to cut the 6 inch diameter hole quickly and easily with this spiral bit. Not having to trim away the excess wood before using my template is going to be a huge time saver!

Works so much better than straight flutes.

It's a great bit! The first one I received had to be returned due to the cutter leaving a mark on the wood...returned easily and without issue. The defect was just a one in a million type of things. These are great bits, great quality and smooth cutting! Will buy Whiteside again! ...and again!

Been using their router bits for years, they are a quality item never been disappointed

I’m using this bit to rout the last line of material on walnut, hard maple and red oak. It has a very smooth cut. I’m routing the first portion of the material with a hand held router. Then turning over the workpiece and finishing on the router table with this bit. The small diameter and clean cut curs cleanly both with and against the grain. I find this multi-stepped approach is smoother than trying to template route one inch plus material in one bite.

1st cut nice and clean. Second cut, the bit broke in half. Durability is non existent. $45 for a router bit that lasted about 3 minutes is unacceptable. I’m sure it works fine for pine and cedar but for hardwood, I would not recommend.

I've been using template bits for several years now to do pattern making. I usually just buy the straight bits at lowes but they dull quickly even though they are carbide, and they tend to "chunk" out my work. The tearout was horrible and I had to go to great lengths to try and prevent it. Since I bought these spiral bits, they basically never tear out my work(unless there is a defect in the wood like a crack). The cutting surface is smooth even on cross grain, and they cut much cooler, which helps them last longer and keeps my router cooler as well. And thanks to Amazon, these bits are only a few dollars more than the inferior ones from lowes. If you don't cut out thousands of templates a week like I do, then this bit will probably last you a life time.

Item as described, good quality, prompt delivery.

Hermosos cortes con esta broca de espiral ascendente, la uso en MDF y jamás me decepciona, una chulada de marca.