GIDEALED Smart WiFi RGBW LED Controller 2-Output 5 Pin with 24-Key Remote,Compatible with Alexa&Google Assistant,Voice/APP Control Strip Lights for Android/iOS System(WiFi LED Controller Only)

Great controllers with both remote control and WIFI controllability using the Magic Home Pro App. I used 4 Controllers for my Coffee bar remodel for under cabinet lighting, inside cabinet lighting, above cabinet lighting and bar lighting. I used a separate controller for each area so I can adjust colors and dimming as desired for each area. Set up with Giderwel RGBW LED strips so I can have a clean cool white light as well as all the colors. I had a few issues getting remotes working properly but Support by email was provided quickly and efficiently. Great job supporting your product! I had previously used these controllers and the Magic Home app at my previous home with very good results. Be sure to order your power supply separately.

We have Alexa connected devices all over our home. We hooked this up to the floor lights under our bed, it will change to any color by just telling Alexa which you want. We are officially lazy now. I can turn on any light, the tv, the air filter,and the fireplace! Definitely a 5 star product!

Works for about 2 minutes then looses connection. It seems that all these controllers that are controlled by MagicHome app are defective. It’s not the app but the actual controller. I’ve ordered a bunch from different manufacturers but they seem to be manufactured by the same company. I also have controllers that work with TuyaSmart app and all of those work. The ones that work with TuyaSmart are from different manufacturers. Unfortunately these controllers are only available as part of the light strip kit. Stay away from controllers that work with MagicHome app.

So the recommended app requires localization ... Why does it need this, WiFi sure, ok. but uneasy about localization ... especially when connected directly to the unit and not configuring it for network connection. The unit itself seams solid but it will only work the RGB or the Warm-White LED at a time, it does not want to support both (Found reversed engineered script for sending socket commands to the unit instead of relying on app, as I dont care for it) but I'm unsure if this 'feature' was intended to prevent LED strip damage, to prevent missive current draw that would damage the unit ... I just know that this unit will not allow for it (or at least I'm unable to get it to run both) I'm testing/running functions with a 5m 5050 led strip 60RGB and 60WW so for my strip the LEDs are separate and I think the strip could be ran with both sets working. moving on. The provided IR remote only allows RGB color settings, even when selecting white, it just mixes the RGB; would be nice if I could adjust the Warm White set from the IR remote. the unit claims it can take 12-24vdc, however I doubt there is a buck converter/regulator built into this unit for the LED strip itself so I would only venture to apply the voltage that aligns to the LED strip you have (otherwise I would assume there would be a switch to select the LED strip voltage). I've not place a heavy load onto the unit yet; I do have plans to have the one unit run 2 strips (power calcs and design suggest this is allowed) at the same time, this unit is rated not to exceed 140watts so use of a fuse to ensure not to damage the unit/lights. Amazon has a section here 'Adhesion' my purchased controller didn't come with a pad/method for 'sticking' this controller to anything which is fine, I would prefer a bracket over sticky tape (the unit is super light and tape might be fine, just a preference) Amazon has a section here 'Brightness' this is the controller ... I assume the basic design is a series of MOSFET to control the flow to the LED elements ... so I've not rated the area as 'Brightness' would be more of the source power supply rather then the controller. UPDATE I've used this now to control 2 strips at the same time as mentioned above. The controller can/does perform this action adequately ...

Great product plugged right in and worked perfectly. Even rf so no need for direct line of site for remote. You can basically hide it behind a wall and it will still get the signal.

The device I received isn't like the pictured device. The one I received doesn't have the pig tail with the sensor on it. This is the third one I have owned, the first two quit working after a few months. I kept losing wifi connection then remote stopped responding. I know they are cheap and you get what you pay for but I expected a little better sense this new picture showed a pigtail with the sensor, but as I said, it didn't have one.

Son muy buenos y fáciles de instalar

This device is brilliant (literally). I lost the remote for my old controller and picked this one up for $13 and it comes with both a remote control AND WIFI! I use an apple phone so the review is based on the apple Magic Home App. Pretty much perfect. Can turn it on and off via wifi from anywhere in the house via wifi and after setting up an account from anywhere in the world. Also the app has a timer feature as well. Can't believe all of this for just $13. Note this is a 5 pin connector. Comes with a male-male adapter which I used for my existing LED light string.