Shimano Ice Tech Brake Rotor, Silver, 160mm

Amazing rotors for my E bike. Just feels awesome when the levers are pressed. Stays firm and no warping whatsoever. I have this installed 2 months ago and am 100% satisfied

Purchased a pair of these to put on a second wheelset for my Cannondale Quick CX 1. They're a different model than the discs on the original wheelset but they worked perfectly. Definitely worth having them so I don't have to swap the discs every time I swap the wheels.

My Orbea came stock with Shimano 180mm rotors. They were adequate for stopping power on flat terrain. When going down steep rough trails I didn’t feel I had adequate breaking control. Jumping up to the 203mm rotors made a world of difference along with Shimano Ice Tech technology which helps keep overheating down. Don’t feel like the down hills are potential suicide missions any longer. Would highly recommend.

Great stopping power. Very easy install. Fit is something you need to think of now. If your bike came with 180mm rotors you need a +23 mm post mount adapter. If your ride came with 160mm you need 43 mm post mount adapter. Also some frames can’t accommodate this rotor size so check your frame specs for max rear rotor size info. I Hope this helps someone and I’m not just mansplaining basic stuff to bike tech nerds.

I have a heavy E-bike (Tesway X7-Pro), and I also tow a cargo trailer with it. So I decided it would be a good idea to upgrade the stock 180mm rotors with 203mm rotors. I got this rotor, the XT SM-RT86 for the back rotor of my bike, and it fits perfectly and looks GREAT. I went with the XTR version of this for the front rotor. (Honestly, you can hardly tell the difference). Of course, I had to replace the front and rear caliper brackets with 203-mm capable units, which added a bit of cost, but not much (around $20 for both). In all, I'm super happy with this rotor slowing down the back half of my bike. It's definite improvement over the 180's, even on 2-piston calipers. And combined with the XTR on the front wheel, the braking performance has GREATLY improved. 5 stars.

Corresponde a lo ofertado

Decided to upgrade my MTB & decided the brake systems was a good place to start. I upgraded from V-brakes to discs. I purchased a pair of 180mm SHIMANO XT SM-RT86 Rotors, pair of Shimano M375 calipers, a Shimano SM-MA90 post to post adapter (front), a Shimano SM-MA-R180 IS to post adapter (rear) & new cables. This setup works awesome, strong breaking, even when wet (much better than wet V-brakes). These SHIMANO XT SM-RT86 Rotors did not come in the Shimano packaging, nor did they come w/any installation instructions. They did come w/mounting bolts (w/pre applied thread locker & tightening plates (see pic). From what I can tell from the branding, fit & finish, I believe these are OEM parts. I am fine w/that, it saves me money w/out sacrificing quality, especially w/something as important as stopping. According to Shimano’s website, the weights for their XT SM-RT86 rotors are as follows: 160mm-131g | 180mm-152g | 203mm-187g. The lighter weight is due to an aluminum core sandwiched between steel. This is also supposed to allow for quicker heat dissipation. What I know is that they work really well. If you’re in the market for disc rotors & your hubs are 6-bolt not center mount, I can confidently recommend Shimano CT SM-RT86 rotors. If you’re on the fence about upgrading your brakes to disc brakes, I’d say do it. Discs stop much better than V-brakes, they look great & if your thinking about upgrading your fork in the future, you’ll definitely have more options to choose from w/disc brakes than w/V-brakes. Thank you for taking the time to read my review. I hope you found it helpful.

I have used XT Ice Tech rotors on several bikes now and they are really some of the best rotors there are. Paired with nice Shimano brakes such as the XTs they will stop on a dime. I really haven't used my brakes with any other rotors however I can tell you my setup works a lot better than any Sram brake with centerline rotors I have tried. The only complaint I can really make about these is that they bend pretty easy. I don't mind truing them once a month or so but just keep in mind after a day of heavy braking these rotors can sometimes warp and end up rubbing.

Lo previsto. Muy bueno

Rotors and everything are great and are what is described, however the seller has decided to ship the rotors in only the little plastic bag within the actual rotor box, rather than leave them inside the Shimano box it originally came in. I presume it is to save shipping costs, however, it puts them at risk of warping to try not to put too much pressure on them while opening.

Super bon disc shimano

All likes, no dislike...👍Original, very fast delivery.

Fa perfettamente il suo dovere, montato sull'anteriore con un sistema frenante xt-m8000 va alla grandissima. Anche se si maltrattano i freni su discese lunghe, dove il freno viene usato in modo prepotente, abbinato con pasticche in resina, non si surriscalda e la frenata resta sempre decisa. Consigliato N.B. gli adattatori da montare sulla pinza non sono inclusi nella confezione e vanno acquistati a parte