TAAM Rio 90 Power Surface Skimmer and Co2+ Reactor with Suction Cups

This is used to keep the surface of my sump clean and to diffuse co2. It does both nicely. I've had some very expensive co2 reactors and I've used glass diffusers. This lies somewhere between the two. For that,i would give it 4 stars. However, it's also a 2 in 1 product. It does keep the surface perfectly clean and with minimal space. Therefore, I give 5 stars overall.

Great reactor! Great product

it's ok for a skimmer sucks for co2

Not the greatest surface skimmer I have others that work twice as good and cost half as much does dispense co2 but I've found it does not mix co2 fine enough and sits to high in tank to get optimal co2 readings I evan tryed pushing it all the way to bottom of tank to just disperse co2 and I still dident reach the co2 leval I wanted with out really cranking up the bubbles a good diffuser uses half the co2 to reach optimal levels so no I don't really think its worth the money the pump in it is pretty weak

Works great for co2. It really swirls the co2 around inside until it disolves. You won't see any bubbles like on youtube unless you really turn it up. 3bps or less you will hardly see any bubbles, but if you turn it up, it will shoot out so fine bubbles just like a co2 diffuser. But with a glass diffuser you really have to turn up the pressure. With this reactor pressure isn't an issue.The only problem I have with this surface skimmer is the suction cups, they don't stay in place when you have to move the reactor. Its a minor annoyance. Also its very big for my 15g tank. Takes up a lot of space! As far as skimming goes, it does keep the surface crystal clear. And for the price, you can't beat, less then 15 bucks, other co2 turbo reactors go for seventy five buckaroos!!If you decide to get one of these, keep in mind there's 2 versions of the Rio90, with suction cups or magnetic mount. and if you have a big tank, theres the rio200.

My tank tends to build up a surface film after a few days. This skimmer takes care of the film and prevents build up. I have a 56g column tank and this seems to have no issue. If you have a lot of floating algae or plant detritus, it tends to clog/reduce flow after a few days necessitating a quick cleaning and then it's good as new. I've found that when I took the little foam filter pad out of the skimmer, it does not get reduced flow for several weeks. I'm not really using this for filtration anyways. Just surface film skimming.As for the CO2 reactor feature, this seems to do a good job of breaking the gas into tiny bubbles. Granted, since it is a surface skimmer the CO2 is being released higher in the tank than most would desire. You can solve this by placing it close to your "regular" filter outlet to help distribute the bubbles more.I challenge you to find a similarly priced device that does both of these features well. We have had in use for four months now with no issues. Overall I am pleased with my purchase.One Year Update: This unit is still going strong and I have had no issues with it. Every few weeks some algae builds up on the intake but it is pretty easy to clean. Got a separate CO2 monitor and this keeps it at the perfect level.

As expected

Worked for a few hours and stopped. Similar to what happened to an aqueon mini heater I bought accept I got ripped off a little more this time. I wonder who manufacters this trash.

Normalmente no dejo comentarios en mis compras pero definitivamente este skimmer me ha funcionado perfectamente, tengo un nano marino de 80lts y cuando alimentaba mis corales con reefroids era un dolor de cabeza la nata de grasa que se generaba en la superficie. Este skimmer en cuestion de unas horas limpio por completo la superficie y hasta se aclaró mas el agua. excelente y no se ha despegado del vidrio como otros comentarios comentan, las ventosas si lo sostienen bien

Excelente para quitar el aceite de la superficie, además de que al conectarlo al CO2 produce burbujas minúsculas y se aprovecha mejor.

Instalado en una pecera de 25 cm de profundo y 100 litros, este equipo cumple de manera excelente su función. El skimmer de superficie es adecuado y mantiene la superficie cristalina. El dispersor de CO2 lo mantengo conectado a un sistema DIY de ácido cítrico/bicarbonato de sodio con 1 burbuja cada 2 o 3 segundos y 1.5 kg/cm2 de presión, la atomización es mucho más efectiva que con el dispersor de cerámica que incluía el equipo de CO2, las burbujas son finas, el equipo las impulsa hacia abajo y con la corriente del filtro canister las mantengo por más tiempo sumergidas y dispersadas en la corriente. Resto una estrella debido a 1) el sistema de ventosas ha sido efectivo pero hubiera preferido el modelo con imanes y 2) quizá en una pecera más profunda podría perder efectividad la dispersión de burbujasde CO2 ya que el equipo al ser skimmer hay que mantenerlo cerca de la superficie y las burbujas idealmente deberían de alimentarse al fondo para maximizar el tiempo de contacto en el agua, sin embargo es un buen equipo y un buen sistema que divide muy finamente las burbujas.