Carbide Inserts Cutters Knives 14.3mm Square Replacement 2 Cutting Edges for Cutech Tool Planer Jointer 40700H-CT 4700HC-CT 40100H-CT 40600H-80100-CT 40200H-CT 40600HC-80100-CT 40200HC-CT Head 10pc

I bought these cutters to replace the steel ones on my Wen pl1326. NOTE: I now see that Asieg Tool makes cutters specifically for the pl1326. But let's be honest, the extra .03 or .05 mm of width & length does not matter and is not going to affect the quality of your cut (unless using them intermixed with the original, smaller cutters).Anyway, I've been using my planer to resurface some reclaimed fir flooring. Despite my efforts to remove all the nails, some are hidden from view and get chopped off by the planer blades. These carbide cutters seem completely unbothered so far, I am very happy with how they are holding up.I know I know... not what the planer is supposed to be used for. But with carbide cutters it's working very well.Thanks Asieg Tool!

Worked perfectly on my WEN helical joiner and planer. Cut wood like butter.

They fit good and cut nice in my steel city planer. Curious to how well they hold up. The screws are to long and bottom out.

I bought a used Shop Fox W1877 that was missing one of the cutters. The others were in fairly good condition. One of these installed and worked perfectly. I now have 10 spares to keep me up and running a good while.

Really work nice

looking for carbide inserts to replace the worn hss cutters on my wen 6 inch spiral jointer. these fit perfect even though the stated size is 14.3 instead of 14.25 that wen sells

The cutters appear to be a direct replacement for my Cutech 40200H planer. I could not install them because the screws were the wrong size. I think the screws I received were 6m diameter and they should have been 5m with a 0.80 pitch.

Factory inserts for my CuTech were good. These were nearly identical. 10 new factory brand and 16 of these put on sane time and I saw no difference and didn’t need to sand after planing.

The inserts arrived clean and sharp. They come in a plastic box with individual slots for each insert. A separate box contains M6 screws which are different from what my jointer uses. I replaced one of my HSS inserts with one of these carbide inserts using the old M5 screw and they are an exact fit. The test cuts are clean on a pine board that engages both new and old cutters. Looks like a good buy. I will update this review when I have more time to evaluate their performance.

Great blades and fit perfectly will definitely buy more soon for my jointer!

These replacements were exactly what i needed for my King 13” planer. Sharp and easy to switch out. Only issue was the provided bolts were too big. I used the original bolts and all was fine.

This is a follow up review, Iv now replaced all 26 blades. They cut very smoothly. I whole heartedly recommend. Just make sure they are SEATED PERFECTLY , i suggest a light pass with wet n dry to clean up the surface of the blade holder. If you dont get them seated they will leave score marks. Hopefully they will last a while being carbide, and about 1/3 the price.

These inserts are a perfect fit for my relatively new and lightly used Magnum Industrial 13" Helical planer. The reference dot is in the opposite corner from the dash on the original inserts but that's minor. As others have mentioned, the screws don't fit but that's not a problem for me as my original screws are perfectly fine. I needed to replace only one insert (it broke for some reason!?) and was not thrilled with the idea of having to shell out over $100 for a set of ten from the dealer. I took a chance on these after reading some of the reviews and I'm very glad that I did. At this price, I don't even mind that I have 9 spares as my King Industrial 6" jointer takes exactly the same insert as well!