Twidec/10Pcs Momentary Push Button Switch SPST AC250V/3A AC125V/6A Mini Off(ON) ON Red R13-507R

Update: after installing and using these several times, i have already had to swap out 3 of these because they work for a day and quit. Its a simple switch so i dont understand what is wrong. After the first day and it sits, they take 50-100 clicks to actuate even once. One star is all i can give. Unfortunatey these arent even worth the cheap price i paid for 10 of them.Initially, i was gonna return these because they were not what i expected. However, after thinking on it, i decided to keep them because they are handy. I swapped the switches i initially had completely and rewired and actually like these pretty good. Time will tell if they hold up. The button is very easy to remove which worries me a little. I will try to remember to post a review later as to longevity.

This is not a switch. when you press it, it is on. when you let go, it is not.So basically i threw these away and bought a switch.There are not bad BUTTONS, to be clear, well worth the cost.But I had searched for "Switches"Perhaps this is a review of the description, which includes the word "switch"

They work as buttons, but buy a few extras because the quality is not that great! In the 10-pack, I had one that did not have the hole punched in the terminal. Also, I melted the first one I tried with the soldering iron, so I had to reduce the wattage lower than what I normally like to use. When it melted, the button was upside down and I did not even touch the plastic with the soldering iron; rather, touching the terminal with the soldering iron for only a second or two caused the terminal to literally sink down into the plastic.

Super cheap momentary buttons. Can be useful for any number of things--possibly a purge button for your nitrous setup. However, you may run into issues with a few of them getting stuck in the depressed position. Not cool! Test them out before using them to be sure that isn't an issue!

I used these switches for a pair of guitar effect foot switches. So far, they've worked fine. One switch lost a terminal during soldering, which made me work a lot faster on the other 9 and I didn't have any more problems. They are cheap and a little fragile, but for this price it's hard to find better.

Pure junk. Switches kept burning out on 18 volt DC. There's no way these could be used for AC use. Do not buy!

Haven't tested all the switches, but they seem to work well. They are not at all protected when shipped and the posts scratch the switch buttons of all the other switches which is a bummer as some of them are quite worn as a result.

They're sturdy buttons. I only needed 1 for a particular project as a BRS, but I don't mind having 9 more of these around in various colors.

These are very cheap, and look exactly as pictured. The buttons are a good shape for fingers (many other ones are pointed and honestly terrible for this reason alone), and I found the build quality to be very consistent.I do wish the leads were a bit larger, specifically to be able to slide bare 18awg wiring through and that the springs were a bit softer (as most hobby applications are going to be using at least wire of that thickness), but again for the price and quantity packaged, no real complaints. Plus, if the leads were much larger, they wouldn't necessarily fit into small areas like these are designed for, and I can imagine that would encourage people to use them with a lot higher voltage than they are good for anyway.Also, even though the springs are maybe 20% harder than I'd have liked for my specific use, the push distance and how they actually track up and down is good, and I wouldn't call these "hard" by any means.

Exactly what I was looking for to replace a pulse switch on a commercial food processor at work. I tested all ten switches for continuity when I received them and all 10 passed. The high amp rating is what I needed and seemed hard to find until I saw these. They were a little expensive but did the job.

Out of 10 only 2 didn’t work so pleased only needed 5 so have 3 spare

Ease to use .

Fonctionne très bien mais les connecteurs semblent un peu fragiles