MOUNT-KB05ES

Very sturdy product and works well. Minimal setup time. Definitely worth the price and would recommend this product.

Update January 2022 Tray is great but if you're like my wife who likes to rest her elbows on the tray... over time the (4) M4 screws that attach the sliding rails to the tray will strip. This will cause the whole tray to fall and can be quite dangerous. This happened at least 3 times until the screws were useless. I was on the verge of buying another tray when I decided to see if I can replace the screws. For less than a $1, I replaced the M4 screws with longer M4-0.7 x 8mm. You can get this at your local big box hardware store. I also recommend adding a dap of locktite on the screws as well to avoid them loosening on their own. This made the tray extremely sturdy without jamming up the slide. M4-0.7 x 10mm would be too long. So stick to the 8mm. I believe the original M4 were only 5mm. Highly recommend everyone to do this to make the tray more sturdy and safe. Wife is happy again! CHEERS! ********************** WFH, my wife works at the dining table which isn't the best for ergonomics. After awhile her wrists/hands were hurting because the table, where her keyboard was, was too high. A keyboard tray would be the solution but since it's a dining table there were challenges to overcome and I got lucky with all the measurements. As a keyboard tray it's probably the best and largest one out there for an edge mounted configuration. I needed one to fit both a full 10-key size keyboard AND enough room for a mouse. This was the ONLY one that fit the need. The mounting hardware is very solid, heavy duty metal. For the parts that come in contact with the table, it comes with rubber pads for protection. It's sturdy enough to put some weight on, like if you wanted to rest your elbow on it. I'm going to provide some key specs that I couldn't find but is very important to know if it this will work for you: - The first is understanding the limit of how thick the table can be to use this. The max spec stated for this product is that it can support up to 1.75" thickness. I can safely say that it's an exact number. My dining table is exactly that thick. The mounting hardware will fit this thickness but it will be a bit tight, +/- 1/8" tolerance. So if your table is greater than 1.75" then this will not work for you as the mounting hardware will not fit. - Next is understanding the required depth from the edge of the table where you must have a flat surface underneath the table to clamp the bottom pressure plate to. The mounting hardware is attached via a clamp style mechanism. There is a metal plate at the bottom attached to a screw handle. You tighten this so it "clamps" to your table. This is important to note especially if your table has a recessed, beveled edge that curves underneath vs. a squared edge. Also sometimes, certain desk and tables have support hardware underneath that may interfere with the mounting point. My dining table had a recessed, beveled edge and it was questionable whether I'd have a solid flat surface to clamp to. PLEASE NOTE: FROM 1.5" in from the edge of the table, you must have a flat surface underneath the table to clamp on to. If 1.5" in from the edge of your table, the surface is curved, angled, or exceeds 1.75" in thickness, then you have no way to mount the hardware. 1.5" from the edge of the table is where the center of the screw plate. - Next is the amount of clearance you will have IF you have a 1.75" thick table. If you're pushing the max limit in table thickness, you are giving up clearance that may or may not allow you to retract the keyboard under the table when you're not using it. For me, I'm at the max thickness and as a result I only have 1.5" from the surface of the keyboard try to the bottom of my table. This means, my keyboard AND mouse cannot be taller than 1.5" in height. My wife uses a thin Logitech wireless keyboard that just meets this height but her MX Master 2 is too tall. As a result, while she has a keyboard tray she can use, she cannot retract it underneath the table. It was still worth using to be pain free. Since we're going to be in this WFH situation for the long haul, the need to tuck your keyboard away is trivial. I also should mention that if you have a ergo keyboard and it's important for you to store it underneath your table, it's highly this won't work for you. You need to have massive clearance for those keyboards. - Lastly, the one tip I have is some people have mentioned the keyboard seems to not stay in place if retracted all the way in or all the way out. I have the latter where the tray on the left side, for some reason, doesn't extend all the way out whereas the right side does. It turns out this is due to the mounting hardware on the side that has the issue being a bit rotated. All you need to do is rotate/twist the mounting hardware a bit to resolve the retraction/extension issue. Sometimes, what happens is my wife's chair will hit the tray and cause the mounting hardware to rotate a bit, which cause some warping or deflection of the keyboard tray tracks, which leads to the issue. The other problem could be that your flat surface is not leveled such that your mounting hardware are at different heights ever so slightly. Ultimately, the keyboard tray tracks need to be as leveled and parallel to each other as possible. I highly recommend if it works for your specifications.

This is a nice keyboard tray. There is a known issue of the tray walking away from you as you type. My fix was to purchase a Barrel Bolt Latch and mount it on each side to keep the tray from doing that. The extended pin prevents it from walking. Had this come with something like that, they'd have gotten five stars. The width accommodates my keyboard and my rollerball mouse, along with a wrist rest for each. My desk is a lesser cost up/down desk so I needed to take into consideration the measurement of the space allotment under the desk so it didn't interfere with the up/down drive pin. This works and I can move the keyboard at a whim, not locking me into a specific position at the desk. Value for the money I think is very fair. Drill accuracy was good, very easy to assemble. The ease of use is great. Put a lock mechanism into play on this and you have a great tray. I am very well pleased with this set-up. I don't need the tray to tip forward as the pad I have it on does this. I adjust the height of the desk for ccommodating my wrist/hand tilt. Ergonomic perfection? Nop[e. But it works for me.

Summary: This is a great keyboard. It arrived on time and was well packaged. It's easy to assemble and clamp onto your desktop. The instructions are clear, the parts are solid -- real metal hardware and no cheap plastic parts. It's steady when you type; no wobbling even if you type fast. The tray is wide enough and deep enough to store my giant ergonomic keyboard and my mouse with a bit of room to spare. And it glides smoothly to store underneath your desktop. Or at least it does now ... which brings me to the reason I was prompted to write a review. VIVO's customer service is outstanding! Quite possibly the best company I've dealt with online or off. My excellent experience with VIVO: After carefully assembling the keyboard tray and attaching it to my desktop, the clamp on the right side seemed slightly off. No matter what I tried -- re-assembling that side, adjusting the tension -- the position of the clamp put the keyboard tray in a little bit of a bind on one side. The tray still worked technically, but was annoying. One side would slide in easily and the other lagged behind and had to be pushed a bit. I contacted the company through Amazon and got an immediate response. Based on the images I sent (which focused on the misaligned part of the clamp, but didn't show the entire clamp) they thought the issue was the slider rail. They offered me the option of returning the entire keyboard or receiving a replacement slider rail. I didn't want to be without the keyboard tray, since it was making a big difference in my hands/wrists/arms, so I asked for a replacement slider, which they promptly sent (and which also arrived quickly and was very well packaged). In the process of putting the new replacement rail on, I realized the issue was definitely not the rail, but was most definitely the clamp. One of the two pre-drilled holes in the clamp was about 1/8 inch off, meaning the keyboard was still sticking on the right side even with the new sliding mechanism. I reached out to the company again about the misaligned holes (this time with an image that showed the entire clamp). They promptly supplied a replacement clamp, which fixed the issue completely. The entire process was fast. The emails were prompt, courteous, and clear. And VIVO was willing to keep at it until the issue was fixed. Highly recommend this product and company based on this interaction.

Fits on my desk great. Tray moves easy and smooth. Easy to install. It’s not super heavy, so that is good for the desk. Durable for years of use.

Very solid, doesn't shimmy or wobble, smooth tray slider action. A quality item with solid steel construction. The only plastic parts were the backstop and the screw handles. The tray itself is composite wood. Large clamping surface gives good support. Back stop does not go all the way across, but that wasn't a detractor for me. It has two sizes: one for complete retraction under the desk and one that protrudes just a little. My desk has a horizontal bar supporting the table top that interfered with the clamps, but I put in a wooden block to provide an even surface underneath (see picture). If you don't feel like making this kind of modification to your desk, pay close attention to the measurements!! I bought this particular model because it was wide enough for both the keyboard and mouse.

I purchased one of these during COVID when, like so many others, I went from being an office employee to a work-from-home remote employee. I need an under the desk keyboard tray for good ergonomics. This was easy to put together and easy to attache to the desk. The tray was easy to pull out from under the desk and slide it back when I was done. Only real issue is that it angles front-down when pulled out and rear-down when pushed back under. There is very little barrier in the back of the tray and sometimes the mouse would slide back and fall off the back of the tray onto the floor. I wish the barrier went all the way across the back. It worked well until recently - about 4 years after I purchased it (one year after the warranty) when one of the small side screws that attaches the tray to the arms that are attached to the desk would loosen over time and fall out. Then a small screw on the other side would do the same, and the tray would unexpectedly come loose and fall down. Sometimes I notice the screw on the floor and crawl underneath to screw it back in. Inconvenient at first, and then more and more of a nuisance when it started happening more frequently. Yesterday the entire thing came loose, and I discovered that there were three screws on the floor. There should have been four, but it looks like I did not notice when it fell out and probably vacuumed it up when cleaning. I am now shopping for a new under desk keyboard tray, and do not plan to purchase this one again. It was great for a while. Until it wasn't.

I needed a clamp on drawer, but unfortunately my IKEA desk has a metal support bar lengthwise underneath that means only 6" for the drawer to slide back. I couldn't find any long skinny drawers (I need something that can hold rulers) or ones with a lot of clearance but saw this. It's fantastic! I think it would suck as a keyboard tray for my setup because it would jam against my knees or thighs (I sit high enough to use a keyboard on the actual desk). However, putting it off to the right as a rimless drawer keeps it nicely tucked away. And it is *solid*. Heavy metal and wood parts, very well machined. It slides fairly well though one glide is a little stickier than the other. It has enough clearance even with the back plate to slide back under the support bar. It holds very firmly to the 3/4" desk edge. While it's not a complete match to my pale maple veneer desk, it's tonally close enough. Now I have room for my cat's fleece pad in front of my right monitor and can still get at my organizer box of office supplies. Plus my new left monitor has a remote that sits on the sliding shelf where I won't lose it. I even put it together myself despite not being very strong or tool savvy. The instructions were nice and clear with a good mix of illustration and text, and a phillips head screwdriver is easy enough to use. I did position it over my computer so now it's slightly awkward to press the power on switch, but even though I have a huge tower there's still plenty of room especially as I generally only need to press that button once a day. Things that would make it even better: Black clamps and hardware to blend in more with my chair, keyboard, mouse pad and monitor base. Being one big shelf (it comes in two halves that bolt together with a backplate, which maybe gives it more center support, who knows, but that means the two halves don't match in grain or exact hue). Having some sort of grip underneath center front to help pull the shelf out -- needn't be big enough to jam into legs for someone using it for a keyboard, could even be a smoothly polished groove -- my hands are steadily seizing up and losing grip so even a smooth little ridge or bump on the bolted on back plate's edge near the tray front would go a long way. Having a tiny bevel at the bottom front; it currently has a sharpish edge that presses into my fingers when pulling the shelf out from under the desk. All of these are minor quibbles, none of them worth docking a star.

Bonjour, Le moins cher et pourtant excellent, la qualité de fabrication et bonne, ,robuste et pratique, je ne regrette pas cet achat.

Needed this for my 49 key MIDI keyboard and it's the perfect fit, except for the height which I bought the height extender from the same brand for. So happy!

The tray feels very solid and sturdy, and slides very smoothly. Also very easy to install and looks very clean. The quality definitely feels good and not cheap. It's wide enough to house a full-sized keyboard and a comfortable amount of room remaining for a mouse. It was well-packaged and didn't show any signs of damage. Some observations based on my first few days of using this: - There is very little clearance between the tray and the bottom of the table. Make sure you measure carefully. My tabletop is about 1-3/8" and there's only about a 3mm gap above my Razer Deathadder + mousepad. - There is no height adjustment for the tray, so for best ergonomics you'll want to use this with an adjustable standing desk. However even with a normal desk, it's still a lot more comfortable having the keyboard lower when you're shorter. - There isn't any covering on the side where the tracks and ball bearings are (which is the case with a lot of these trays). Sometimes I find myself resting my hands on the sides or trying to adjust the tray by holding the sides - and end up with a handful of lubricant - The tray is 11.5" deep but only about 9.5" will be "out" of the table at max extension. I have a Grifiti wrist pad that's about 4" wide, so with a standard keyboard, the row of F-keys are basically right against the edge of the table. - You can only install it in one of 2 ways - either you have 9.5" of extended space and ~1.5" poking out from under the table when it's "tucked in", or you can have about 8" of extended space and the tray being almost flush with the table edge when tucked in. Either way you'll have at least a little bit poking out and some lost space.

Bandeja para teclado, funcional, ergonômica, sem furos, de fácil montagem, discreta e bonita. Recomendo.

3.5 stars if I could. Quality bamboo surface is one solid piece, not laminated sections. Sliding mechanism is smooth and hardware includes extra screws which is thoughtful. However, the standard installation creates insufficient clearance between desk and tray. Had to install the rails backwards and upside down to get proper spacing, this modification voids the warranty but was necessary for practical use. The modification dramatically improved usability and comfort, making it actually functional for daily use. VIVO should redesign this with better clearance as standard. The current design seems like an oversight that forces users to either accept cramped spacing or modify the installation. Despite the design flaw, it works well once properly installed. Just be prepared to potentially modify it yourself if you need more clearance.