1. N male connector 2 .DC-3/6/9/13.5/18 GHz 3. VSWR : ≤ 1.06 4 . 50 ohm 5 . 3 / set (including short type, load type type)
P**L
The vendor, must send the part, like the picture and reference on Amazon
I received parts different that show on line. It works, but , is different.
N**R
Good Quality OSL Kit
First the sellers picture doesn’t reflect the actual item as you can see from the attached picture, although the description says SMA type. Having said that if you’re looking for a lost cost quality alternative for an OSL kit this one is highly recommended. As you can see from the attached picture it measure’s exactly 50 ohms at 28,000kHz. I have checked it on various amateur bands with the same results. This is a must have item if you’re wanting to do precision antenna measurements for RL readings and Smith Chart accuracy. You will find that most RigExpert Antenna Analyzers will fail the load test without a precision load. I have four dummy loads measuring from 49.5 to 50.5 ohms. Everyone of them failed the RigExpert Load Test due to not being exactly 50 ohms and having extremely low to no reactance. This OSL kit is highly recommended.The item came well packaged in two anti-static bags
T**Z
SWR of load <1.03 to 600 MHz
As a check on the quality of the 3G LOAD supplied, I measured the SWR and return loss from 1 to 600 MHz with my RigExpert AA-600. The maximum SWR indicated was 1.02 (see the attachd image). This set should be very useful in developing antennas through at least 70cm wavelengths.
R**T
OSL Calibration Connectors
Open, Short and Load (OSL) connectors as received in metal storage case. The case will definitely aid in keeping them clean and undamaged. The 50 ohm load tested at 49.97 ohms with my equipment. Note: these are N-Type male connectors. These are quite acceptable for my amateur radio activities.
H**.
Good kit for the money. The load in mine measured 50 ohms up to 450 MHz.
The load in mine measured 50 ohms spot on
G**S
Very good for the money
As mentioned in another review, these are N connectors, *not* SMA but the images are correct.A great price for non-professional use, geared mainly towards the amateur doing calibration of their antenna analyzer (just one example).For this, these are good and way less expensive than anything else I’ve found.73, N4SL
B**E
Works as it should.
Tested with my RigExpert AA-1500. They read as they should. Seems tp be a good value.
Trustpilot
1 month ago
1 day ago