LED TV Backlights 2M LED Strip Lights USB Powered RF Remote Controller 20Colors 22Modes for 40-60Inch TV

I have probably had a dozen lights like this over the years and some have been decent, some have been ok, some have been atrocious.These are the best I have had for two main reasons:The glue is superb - as soon as you peel the backing off you can smell that it's decent - and it is, it creates bomber adhesion.The remote is RF and so you don't need line of sight. All the others I have used have an IR receiver that, when installed, rely on bouncing signals off the wall to the back of the TV, or in my case desk.There are other things I impressed with though, it comes with spare adhesive tape so if I have ever wanted to move or adjust my lights then I can do.The lights remember the colour setting they were on when powered off and powered back on - nice touch.The RF receiver is a tiny slim thing - not like in the old days where they were the size of a matchbox, this is more like half a stick of chewing gum.I'm genuinely very impressed and will likely be buying another set for my TV downstairs.

Just opened the package which arrived next day to ordering. I already have a similar product which cost £12.99. The first thing I noticed was the quality of the strips, unlike the other set these strips are coated back and front leaving them less prone to dust, also they have 15 RGB LEDs per strip, whereas my other set have only 9. Therefore 60 LEDs per 2m as opposed to 36 per 2m. The 3 connector strips are proper leads not just bare tape with very basic plugs, supplied with my old set. Once fired up, although the remote with this set looks smaller and more basic than my existing set, it offers lots more programs and levels of brightness and speeds. I haven't fitted them to my TV yet so can't comment on the adhesive tape which comes separate to the LED strips. With my existing set the tape was part of the flimsy strip, not ideal if you want to change TVs. In conclusion this set of LEDs is cheaper than my existing set and vastly better in every way.

I opened the box and saw a reel of LED's so thought some cutting would be required, I was wrong. The reel had 4 LED strips already terminated ready to simply plug into the corner adaptors. After cleaning the rear of the TV to get rid of any grease or dust, I stuck the supplied secure tape to the TV around the edges. I then peeled the back off the less impressive tape on the LED strips and pressed it down onto the adhesive strips already on the TV. The LED's feel really secure and don't feel like they will fall off any time soon. After attaching the corner pieces in the correct orientation (mentioned in the instructions) I plugged in the controller and plugged it in to a USB power brick since my TV is old and the USB isn't powerful enough to power this product (I knew this before ordering). Not a problem as the LED remote has a power on/off button. After pairing the remote to the receiver as per the instructions, the remote works perfectly, and because it's RF it works perfectly no matter where the remote is actually pointing. This is a major plus point and the reason I chose this particular product. The difference is immediate, check the pictures to see the difference. Means i now no longer need to have the main light on during my all night gaming sessions, and should be easier on the eyes as well.

For the cost of this LED set, there really isn't any negatives.The strips are very bright, with a comprehensive choice of colours and pattern modes to choose from with the supplied remote.The light given off isn't a solid 'bar' of light that you might see from more expensive set ups. The light from each individual LED is very much separate from the neighbouring LED, but if the strips are hidden from eye view, then this is less of a quirk.They stick very well and extra adhesive material is supplied should the aleady applied sticky tape not suffice.From the instructions supplied, it isn't obvious as to which way around the strip end pins should be connected to the USB lead provided. So, if the strip does not light up, just flip the pin end connector 180 degrees and re-insert. The strip should then light up.Overall, happy with my purchase.

I'm very pleased that I was tempted to try these - for the price I was willing to be wrong but ended up delighted. The leds are attached to the rear of the 40" Sony Bravia which does sterling work as both a tv and computer monitor in my recording studio. The wall behind this is clad in a teal-coloured fabric (which covers the acoustic treatment underneath). This tended to disppear into shadow as a result of the nearby white downlighters in relation to the monitor. 15 minutes of carefully attaching the four led strips to the monitor rear resulted in a transformed look which was very pleasing. I was glad I'd installed a USB outlet-type mains socket behind the monitor - this provides the requisite power satisfactorily. The remote control doesn't require any part of the wiring to be visible in order to work. Adhesion to the monitor continues to be good. I honestly couldn't be happier with the outcome of what was an impulse purchase - one of my best decisions of 2020. Highly recommended!