CBI GA1 1/4" to 1/4" Guitar Instrument Cable, 10 Feet

I bought it mainly because it was "Made in the USA". Still though it works, seems pretty durable and is priced right. Only knock I give it is the jack sleeves unscrew and come loose easily. I just used a very little thread tape and the problem is solved.

This is a cheaply built cable. It has basic ends, they screw on but seem to come loose and need tightening frequently. The only truly redeeming feature of this cable is it's tiny length : 3 feet. I use it with my Honey Tone Belt portable amp Danelectro N10A Honey Tone Mini Amp in Aqua , so the cable has to be short. The amp is on my belt. I use it, thus, just like Jackson and Cole, reviewers below. Like Jackson, I have a RISA solid body electric ukulele.Let me say, three feet is short, very short. If you want to put the amp down on the floor, you'd better be (a) short, and (b) siting right over it, because when you find out how limiting three feet cable really is, you'll recognize that you can only use this for one thing: a portable amp, close to or on your body.I suppose you could use it to connect a couple of guitar pedals and not have too much cable, but them again, most connector cables are even shorter.Glad I have it only for the purpose I intended. Wish it was heftier, stronger, better looking, like my other guitar cables.

The cable that came with my cheapie starter electric guitar kit wore through at the connector linkage after less than 3 months use (30 min/day sessions 4-5 days/wk), so I bought this one. Being a n00b on cables, all I can say is this one feels sturdy and "real." Nice rubber(ish?) outer casing is flexible and supple. The connectors on either end are made of metal and have a twisty outer casing that revolves around the under-components. The 10' length gives me 4' more to move around the room (if only there were 4' more places to go to in the room...).If you get one that doesn't work out-of-the-box, return it. Amazon's good like that.

I have had my 25 foot cable for years and I was happy to add this to my roster of cables. Not much has changed since my last cable and that is great

Just long enough for me to sit in my recliner with my strat and reach my amp that is within arms reach. Didn't need a long cable, this little 6 footer is perfect for my needs. Plugs are quality, I took the plug screw caps off to check the soldered connection, and that looked great. The wire is pliable, and reckon that if my Pug doggie doesn't chew through the soft casing it will hold up for years with the way I take care of my stuff.

it did the dishes for me, washed my car, and cleaned the bathroom. when it was done, it made me a sandwich and got me a beer. it let me watch my own TV shows and did not complain. and then when i was tired, it rubbed my shoulders and made sure i got a good night's sleepmade in USA didn't hurt, either

I bought these to replace the cruddy cables that came with an all-in-one guitar/amplifier/etc. kit that finally went bad.Seriously, for the price, these can't be beat. I'd even pay a lot more for them. Don't let the off-brand name put you off. Go ahead and get them - you'll be glad you did.I'm using mine on a Strat straight into the amp, and also through effects pedals, and through both paths they work great: no added hiss or other noise, no pops or cracks, nothing. Perfectly quiet cables that deliver the signal from the guitar at full strength without modification.Get 'em.

I bought this short cable for my new Risa concert stick electric ukulele to use with a Danelectro mini amp. I wanted the freedom to play wherever I wanted without lugging around an amp. Not much to say about it other than it works well. Pug at the Beach: An Island Dog's Reflections on Life [...]I use the chord with this amp which I also like. Danelectro N10A Honey Tone Mini Amp in Aqua This is the other amp I use. Also a nice practice amp. Roland Micro Cube Guitar Amplifier- Black

The cord was good quality but the connectors failed the magnet test. They stuck to a magnet and this type of connector should not have magnetic properties, should be no steel present. If it had had better quality nickel Neutrik or G&H plugs I would have kept it.