LARMOR 0.3mm Self-Adhesive Optical Glass LCD Screen Protector for Nikon D7100

This set seems fine. Nice and clear, no loss of image quality. I like that it includes protection for the top screen too. You must be very careful placing the rear protector. It has a small black border and if the you are off by just a hair, you will notice that it intrudes into the picture info when displayed at the bottom of the screen. This bugged me and I successfully peeled it up and re-applied.Tip: The protector comes sandwiched between two sheets of plastic. Instructions say to remove the adhesive side, install, and then remove the final protective sheet. I suggest removing the #2 protective sheet first. It is cut slightly larger than the glass and that is what made it difficult to precisely place it. With that removed, you should have success on the first try.A moist towelette is included, but not a dry microfiber cloth, so have one handy for a final wipe.

This product was reasonably easy to install if you are careful to get it straight, and it seems to do what it is supposed to do. I have only had it for a couple of months, but the only negative I have noticed is that it seems to pick up fingerprints and smudges more easily than the native screen did. It isn't difficult to clean them off, but who needs another thing to clean. The protectors don't seem to reduce the quality of the image you see on either screen. I guess I'd buy it again.

My new Nikon D7100 just came in the mail. i pre ordered this LCD protector ahead of the camera, i opened the package to find the pieces, the big screen went on perfectly, the top viewing screen went on But without any pressure it cracked, shattered, i will now have to purchase another package with both pieces just to get the upper glass, Shame the supplier does not have one ot the other pieces separate when this happens, OH well ! next time around i'll be extremely careful, otherwise seems very nice product,J.R. Massachusetts UPDATE !, with cleaning the camera screen many times to make sure it was very clean, before placing this protector on it, now i have had it on since May 7th 2014 it seems to have an air bubble starting in one edge, it has not been mistreated, lifted off,don't know if this is a defect or just something that happens after a month of use, I don't know if i will purchase another one or go with different company brand, no warranty information? i would think it would be replaced ? I wonder if others have had this problem !

Excellent product. The directions in the package are in Chinese, but if you've done this before with a smartphone screen protector you shouldn't have any problems. The package comes with a quick drying screen wipe and the two LCD protectors. I didn't use the wipe. My preference is a lint free microfiber cloth and Perfect Glass in the metal aerosol can. After cleaning the screen I put on a pair of nitrile exam gloves. I believe this is important as it allows you to touch the protector without the fear of getting fingerprints on the inside. One recommendation is to situate the protector on the LCD before peeling off the adhesive protector. You'll find that it is precision cut and there isn't much room for error. The first time through I made the mistake of not peeling off the outer plastic (Labeled #2) before attempting to apply to the large LCD. The outer plastic caused me to get part of the protector on the camera body because I couldn't clearly see the edge which resulted in horrible air bubbles. Since I was wearing gloves I was able to use a fingernail to remove the protector and try again with the outer plastic removed. If you go slow it won't break and the second time I was able to get it on perfectly with no air bubbles by removing the plastic from the outer side. I removed both plastic protectors from the small LCD before applying and it went on perfectly. The large LCD protector has what I would call a non-traditional adhesive on the inside. You can't feel it when touching it with gloves, but touch it to glass and it's almost like it creates a vacuum seal. The smaller one seems to have a regular adhesive on it because I could feel it sticking when I tested reversing direction half way during the application process. If you apply without gloves take note of the different adhesive. I can't tell any real difference in the picture preview quality so this is definitely a 5 star product.

If you're like me and paranoid about your D7100's beautiful hi res LCD getting scratched up (even though its supposed to be gorilla glass), this product is for you. The material is super strong as far as I can tell and is crystal clear, making sure there is no clarity degradation from my nice LCD screen. This makes reviewing your shots easier than say an anti-glare matted finish (which helps with the glare but also makes your preview screen pretty much useless as well).Installing this puppy is super easy. The screen is built to exact measurements of your LCD screen and top view LCD. Just remove the sticky adhesive, line up and apply. There were very few air bubbles I had to deal with and whatever appeared could be easily squeegeed up. So far the protector has stuck on very well and I'm not at all worried it would fall off.For those that are worried about it damaging your screen when removing it...I've not had to remove it yet. Its supposed to be easily removable...but the only time. You'd only remove it if it gets seriously damaged or scratched up...and if you're careful with your camera, that would be a rarity. Overall I really like this product and give it 5 stars!

appena si apre il pacco si vede subito che dentro c'è qualcosa di top. la confezione esterna protegge egregiamente le pellicole per il trasporto ed è un piacere anche aprirla. venendo alle pellicole sono ottime, hanno un bordo nero il che le fa perfettamente confondere con il colore nero della fotocamera. zero bolle, zero problemi. montate su d7100.