KICKER Black OEM Replacement Marine 6.5" 4-Ohm Coaxial Speaker Bundle - 4 Speakers

I ordered the black speakers because no other colors were available. However, the speakers that were delivered were more of a dark pewter color. This was great for me because it was a much better contrast to my pontoon boat's panel color. If that color was available, I would've ordered it.That being said, if had ordered the black because I wanted black, I would've been irritated, so take that for what it's worth. I vastly prefer the color I recieved, so it was a fortunate mistake for me.The speaker grills are separate pieces, so you can paint them whstever color you like.While these speakers are a vast improvement in sound quality over the base level OEM speakers that were in my boat, and I am very happy with them, don't expect high fidelity audio. These are still OEM level speakers, they're just a step up from base OEM level speakers. If you already have "premium" OEM speakers, these are likely to either sound the same, or slightly worse depending on the quality of your "premium" OEM speakers.As far as installation went, the male quick connects on the Kicker speakers are different sizes, which is pretty normal these days, but, in my case, both of the male quick connects were larger than the female quick connects on the boat, so I had to buy new female quick connects, cut the old ones off and crimp the new ones on.I just went to the hardware store and got the female quick connect size that fit the larger male quick connect. The female connector I used was a GB (Gardner Bender) 20-141F. I used that connector for both the small and large male quiick connects. The smaller male quick connect fit good enough and it was a good, tight, connection.I had to elongate the existing speaker screw holes as these speaker's screw holes were on a slightly smaller radius from the center of the speaker than the OEM speaker. In my case, the OEM speakers were mounted with 1 inch long stainless steel machine screws and nylock nuts. However, the grill on the Kicker speakers is thicker, so I had to buy 1-1/2 inch 8-32 stainless steel machine screws, stainless steel nylock nuts, and stainless steel washers. The Kicker speakers come with 1-1/2 inch stainless steel wood screws, but since, on my boat, there's no material for them to screw into, I couldn't use them.It took a few hours to install the speakers. I really like the little plastic cases that Kicker provided to protect the connectors and keep them sepatated.Overall, I like this speaker kit and it was a definitive upgrade in both appearance and sound quality on my boat.

Great speaker for the price. At the time I bought these, the price was around $230. Even though these are sold are replacements, I used these for a new install in my UTV. They were a great size, sound well and look good. I like a clean install so I found the male connector for the RGB wires (Deutsch DTM04-4P). The LED lights are bright are a nice addition. Only improvement would be a snap closure secure terminal box that doesn’t use a zip tie. Other than that; great product.

These were a huge upgrade for the original speakers that came with our 2016 Sun Tracker Party Barge 22 DLX. They are clearer, have much better bass, and are just plain louder than what came with the boat. I was so happy with the sound and price that I ordered a second set for our ski boat! For both the pontoon, and the ski boat (Supra Comp Ski), the screw holes lined up with the original speaker screw holes.FYI, these do not come in retail packaging. They come shipped extremely well protected in a brown cardboard box, and individually protected with brown cardboard inside the larger box. For me this was great because they were significantly cheaper than retail, and I was just popping them into our boat the same day. But if you're buying these as a gift, its good to know they aren't in traditional retail packaging.Pro Tip: if you're installing these in a newer Sun Tracker, the stock speakers are mounted with the wire connections on the side (think 9 o'clock position). Since these speakers have branding on them, which requires they are mounted up and down (think 6 o'clock position), if your wires are short (just long enough for the original speakers) like mine were, you'll have to add a couple wire extensions of a few inches. It's simple to do, and only takes a couple minutes, but you'll want to know ahead of time so you can have the supplies you need to complete the installation.

Bought for a simple replacement speaker. After reading reviews thought they came with connector already installed. They did not. I also got no hardware and there is no gasket. They did not fit factory blue wave holes. I had to enlarge openings. Then mounting holes did not match so had to Redhill holes. Had to unsolder plug connector from existing speakers and re solder on new kickers. After 4 hours, speakers look great and sound awesome. Replaced older wet sounds speakers. These kickers are louder and crisper! Wish install would have been as simple as they made it sound.

Bought these to upgrade my RV speakers , they sound great and handle power easily.Kicker quality

I’ve had these for 3 years on my boat now and they are amazing. Not only the sound quality, but the longevity. They are exposed to salt and fresh water regularly and have not shown any signs of wear and tear. I had to write a review bc of the negative ones. So what if the holes don’t line up exactly, drill a new one. Took 30 seconds. Used 3 out of the 4 original holes and drilled one new one. I bought another set for my dads rv outdoor speakers so that will be the ultimate test for their durability

I bought these speakers to replace the well worn SSV Works 6.5” speakers in my RZR. Here’s my beef with these speakers... The speaker grille covers are larger in diameter than the SSV speakers that came out (and larger in diameter than another Kicker set I have). Typically this would not matter if you are installing these on a flat surface. However, if they are going into a sunken in mount that would make the speaker flush, the larger diameter of the speaker cover will give you issues. Secondly, where the screws mount in to hold the speaker is completely made of plastic, no metal backing plate, it’s easy to break off as well if you’re not careful (Which I did and it was very frustrating). Kinda cheap IMO. Luckily with some modifications I made it work and they sound awesome!TL;DR: You may want to look elsewhere If this is not being mounted on a flat surface. Be extremely careful not to over tighten. Screw mounts are fragile.

The media could not be loaded.  Looks good and sound is clean.

Sounds decent for the price !!