Anyos Magnetic Case Compatible Oneplus 8 T-Mobile & Unlocked Phone, Ultra-Thin Magnetic Adsorption Metal Frame with Built-in Tempered Glass Screen Protector, NOT Fit Oneplus 8 5G UW by Verizon, Blue

It’s hard to see and a close-up is just a blur. But on the back under the clear plastic I pulled off it was already scratched. So i’v got the first scratch out of the way. Other than that the fit and finish gives the phone some snap. It magnetically held together and I’m not sure what will happen if and when I drop it. But it’s keeping the phone scratch free and I just have to wipe down the outside glass for now. There are areas that dirt and dust can make it’s way under the glass to the phone so a cleaning about once a month should keep all the dust at bay. It’s a nice case and it has real tempered glass. Update (17 August 2020) Got bad news, Verizon and I went round after round trying to fix the SIM card problem because it activates, then goes away, it activates, then goes away. However, after many days of back and forth I discovered that every time I put THIS CASE back on it after getting signal was what was making the signal to disappear all together. So the rounds I went with Verizon wasn’t the problem but THE PROBLEM WAS THIS CASE STOPPED THE SIGNAL FROM PENETRATING into the phone, thus, no communication at all. I’v got to drop the four stars to one. One Stars⭐️—-

The glass case is slick. It is one of the few cases that has a glass cover for the OneTouch 8 Pro. Glass all around allows the phone to be seen and minimally protected. It's slick on how easy it is to install and the two halves snap together with magnets.However, that is also it's downfall. The all round glass is hard to hold with "wet" hands. It will slip out of your hands easily if your hands are not dry. Plus the glass makes it slide around on all surfaces.The main draw back is that the glass protection sits "below" the camera bezel to that means when the phone is on a table top, the phone is resting on the camera lens...not good and it's unstable too...if if you are tapping the phone the phone walks around.Other than these physical issues....it's a well made and "slick" case.

I've had other cases like this on other phones that have performed reasonably well for the price; not the case with the one. Within a few days of owning it, it was knocked off a shelf about 2.5 feet from the ground, landed on it's back, which seemed like the strongest part. When I took my OnePlus 8 phone out of the case to fully inspect it, the rear cover of the phone was shattered, this case transferred 110% of the shock of it's short fall straight into the phone, horrible product that will now be costing me more money than if I had just done what was right in the first place and bought an OtterBox. Buyer beware!

The case looks nice, but ruins the functionality of your phone.Ever since I got the case I've been having issues with using the internet on my phone, so I decided to run some speed tests. With the case on, I'm getting about 30mb download speeds, 0.2mb upload speeds, and about 50% packet loss (something that should be at 0%). Without the case I get 50mb download speeds, 2mb upload speeds, and 0% packet loss. The slow upload speeds and extremely high packet loss make it almost impossible to use data off of wifi.The case also makes it very difficult to use the fingerprint scanner. Without the case it reads my fingerprint fine, but often when the case is on I have to try it several times before it can read it.On top of that, the button covers are terrible and the phone is fairly loose inside the case. This makes it so when you press the volume buttons it will often press the power button too, regularly causing you to take screenshot you don't want or locking the screen when you don't want, on top of not actually changing the volume like you would like.Lastly, while this is something you should expect with a case like this, it's not really going to protect your phone much in a fall. The two halves of the case are likely to split apart and send your phone flying. Given all the other issues, this case really is not worth the extra risk or hassle and you really should look into getting a new case.

GARBAGE!! DO NOT BUY THIS CRAP-CASE!! Brought my concerns to the seller, they immediately issues a refund with no feedback on their part, whatsoever. They KNOW this case is GARBAGE.. Yet, Amazon still lets them be a "seller" on their platform.Also, this case took every bit of 2 MONTHS to arrive.. only to crack the screen, the same day I installed the case. The phone fell from my couch, onto a rug on my floor.. CRACKED THE FRONT SCREEN COVER... smhDO NOT WASTE YOUR MONEY OR TIME!!

I find that my Oneplus 8 pro does not fit this case well. It case doesn't completely close. When I get it as closed as I can, the screen does not respond to touch. It arrived with TWO green screen protectors on the outside. I found that surprising. I thought ordering the green case would go along nicely with my green phone. I spent about 2 hours messing with this case. Then I found another listing here on Amazon for UNLOCKED phones, which is what I have. Why doesn't this listing mention unlocked phones, and provide a link to the other product? I will probably end up returning this one, and trying the unlocked version. Or try another manufacturer. Very unhappy. The product listing says they will help with any problems. THEY HAVE IGNORED ME.

I found myself playing with the case moreso than anything, however the case is a bit too thick for the finger print reader to work a good portion of the time, but it does work. the case is a bit bulk, understandably. i oped to swap this case to a rubber one though... just couldn't get used to the smoothness all around type case..

The product feels very good quality, but its function is lousy. Although the cover has a hole for the sound button. That hole is useless. It is impossible to move the button, neither with your finger nor with your fingernail. That may not be annoying enough, but there is another problem. It is impossible to use navigation gestures. Because the screen protector covers the bottom part. I couldn't use for 1 minute