Table Saw with Stand 2000W, Metal Base Frame | Saw Blade with Height/Angle Adjustment Facility, Angle Stop +/- 60°, Parallel Stop, TC-TS 2025/2 U

Now this was a very pleasant surprise as to size ! Even without the extra add-ons to width this still like a dinner table for two. Easy to follow set up just do not over tighten bolts as dud on one of the legs. Decided before if table wide enough before going into fitting the extra width . Do check saw is set right as in instructions I did a couple test cuts before the table guide was accurate. You do and will need a proper hoover to suck up sawdust, do not think a normal household one will do trust me it won’t ! Get a 20lt min wet dry one . Over all very happy with it . Oh one thing I’m adding on is two wheels to make it easy to move about so decide where you use it if it going to need moved about as the extra support legs are flimsy if you move it as buckle under wieght . But value fir money ? Yes very much so, I have the smaller size one two and it a quarter size of this one. 🌟🌟🌟🌟🌟🌟🏴󠁧󠁢󠁳󠁣󠁴󠁿🌟🌟🌟🌟🌟

First things first. It cuts. It arrived as expected with Amazon. A good buying and delivery experience. Upon opening it was apparent the table was bent. I had two options, return and await a new one to be delivered, or be impatient and manually bend the thin metal back into place and utilise a spirit level to tell me when to stop. I was impatient. No drama, I done what was needed. As I was planning to build a cross sled and use the saw mainly for small cross cuts this wasn't an issue. So accuracy, it needed adjusting. Do not trust the angles on the saw tilt. You set it to 0 and it'll actually be about 10 degrees. I purchased a digital angle finder and trust in that. The tape measure and measurement finder on the table. Not accurate, about 3-5mm out. If ripping material with the fence I'd recommend using a metal rule and your eye for this and not relying on the manufacturers guides. Again, this isn't an issue for me as I built my own sled using the 5 cut method and now have accuracy to withing a thousand of an inch. Ease of use. It spins really fast and cuts wood, and also fingers. It's a simple plug in (3 pin), hit the green button and cut. Comes with a push stick (buy another for two directions of pressure). Value for money. I certainly wouldn't buy cheaper, but for what I needed it for, small projects utilising a push sled, it's perfect and didn't cost the Earth. Yes there are better out there, yes I one day aspire for bigger, but this is really all you need for small garages and projects. Oh, it's very messy. I hook it up to my Kercher W2 hoover. Next to useless. The hoover sucks fine, but the dust seems to chuck down to the floor and not the hoover extraction pipes fitted at the rear. Could this be rectified with a high volume low pressure vac? Probably. Do I want to spend hundreds doing do just yet? Nope. Just a forewarning to fellow hobbiests that your wives/husbands may well moan about covering your darling sons bike in sawdust. Would I recommend this saw? Yes.

Lots of features good german quality cuts timber like butter

This was one of the best buys I made this year. It was not the easiest machine to assemble, but once in place, it is sturdy, safe and versatile. The two guides allow for straight and angular cuts. The guard makes it a safe piece of machinery, even cutting at maximum output. One of the few drawbacks is that it is loud; you'll need ear protection. I had tried a circular saw and felt that it was unsafe and inaccurate. By comparison, this table saw is precise and very secure. Don't take any shortcuts with the procedure to assemble it, it is absolutely vital to follow the different steps. Once you have got it going, you will find lots of (safe and useful) uses for it.

Not impressed with Amazon, hence the loss of two stars! This product was not new, clearly part built then repacked by someone who didn't want it 'a return', the box looked like the security dog chewed it. This should have been sold as a refurb (not new)! Other than that all the parts were there, it took a while to build (allow a couple of hours) and was tricky in parts to fit. The side extensions aren't precision fit, but it was cheap so no complaints there. I haven't cut anything yet, but it works/spins fine, very loud and very dangerous (so be careful when using, as the guard isn't that great).

Easy and quick to assemble, amazing value for money, fence and miter gauge not at all accurate and virtually impossible to cut a square at 90 degrees. However good for ripping down planks in no time

Uppfyller mina förväntningar. Lätt att montera.

Très belle scie fonctionne à merveille à part que pour le montage il manquait des ecroux et vis heureusement j'en avais mes pas les mêmes

Llegó antes de lo esperado, cuando la probamos nos faltaba un centímetro hasta que nos dimos cuenta que era la compensación del disco, así que es precisa. Con las instrucciones del manual se monta bien. Te dice donde está todo y que piezas tornillos o llaves tienes que usar. Las llaves las trae enganchadas en un lateral. El precio va acorde a la calidad. Hay una pieza que es como la guía de corte que se puede poner para zurdos y diestros la verdad es que el que construyó la máquina pensó en todo. Se puede poner fácilmente en ángulo y el disco se puede ocultar por completo o sacar hacia fuera para más seguridad cuando no se está udando. Recomiendo su compra al 100% y tengo conocidos profesionales que al verla en mi casa también se la quieren comprar. En esta máquina por el momento no he encontrado desventajas. Es bastante grande mucho más de lo que me esperaba.

Po pierwszej próbie wszystko wygląda super jak za taką cenę jest OK. Brak instrukcji w języku polskim.

Ottima, solo un po' rumorosa, per il resto funziona molto bene