NOYAFA NF-8209 Network Cable Tester, Ethernet Cable Wire Tester with POE & NCV for CAT5/CAT6 Wire Tracer, Length Test, RJ45 Network Tester Kit for Cable Tracer Telephone Line Finder Home Repair

I'm a telecom professional and this tool is great! I'm able to accomplish multiple tasks with this one kit that would normally requires multiple seperate testers! I was a little skeptical at is capability for the price but once you started getting the hang of its wonderful! Im able to test continuity, tone and trace cable, determine the length of cable and even test POE! There is a little manual that comes with it but it's not really a complicated tester. Just make sure you are using the right port on the tester to match the test you are trying to conduct! The cable toner i found to be very adequate! You do have an option to test via digital or analog settings and you can adjust the sensitivity for a solid confirmation. It does come with various adapters for different testing conditions. I was to thrilled about the case. I like the layout and the availability of storing things away but I'd prefer a hard case to house it. There have been a couple times ive had something on the toner wand driving and it would turn on and beep but if thats just a preference thing BOTTOM LINE: Highly recommend for the price! The convenience and funtionality that is packed in this kit is definetly worth this price!

So I can't say enough about this little, capable, affordable piece of kit. I do my own cabling for my network. I largely live in Cat 5e. I had an old led type tester that would only show me whether I had a fundamental connectivity problem. That was great for awhile. But recently I moved over to doing pass-through connectors. I noticed on my network switch that my connection speed for a new cable was only 100Mbps though it should have been 1000Mbps. My old tester showed everything was fine, but it obviously wasn't. So I splurged the $50 for this little tester. I confirmed that my crimps were bad due to a faulty crimper. I now speed test all of my new cables with this tester by connecting the tester to one end of the cable and the other end to a spare gigabit switch I have. I liked that it did continuity, length testing and toning. A nice feature is that you can get a reading of the wire speed when you use the toning/flash option. The flash option was great as I wanted to map out my network. I connected to each ethernet jack, connected the tester via a short cable and went into flash mode. I then went to my switch where I could see the light pulsing slowly (differently than regular flashing.) I then noted which switch port that particular jack was connected to. I found that it tones wires fine too. I do run POE+ devices too. So I'll check that out eventually. Anyway. I like it. It wasn't that expensive and did more than I needed it to do. Hoped this helps.

As someone who went from working behind a desk as a network engineer to pulling cable several times per month as a contractor, this little kit has been fantastic. All features that I have used (toner, cable tester, port flasher, port tester, port flasher) work well, and seem to be accurate. My biggest issue I run into is battery life, and the case it came with. It will eat through good batteries (Energizer, Duracell) pretty quickly, and the soft case allows the toner and tester to be powered on if you’re not careful about how you place them in soft bags (ie. backpacks). I strongly recommend investing in rechargeable batteries and purchasing a hard case. Build quality and button quality are a little questionable. Everything is made from fairly cheap plastic, and the buttons feel like they would be easy to press too hard and break something inside the unit. Overall, I think this thing is a very useful little tester for someone who isn’t worried about reliability, or who can at least be very certain they can keep it from getting crushed. I will be upgrading to a name-brand unit soon (ie. Klein), but I definitely do not regret buying this.

I am a network operator, not a electrician, so this tester doesn't get used on the day to day. My first RJ cable tester was: https://www.amazon.com/gp/product/B01M63EMBQ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Works great for testing a crimping here and there, but very primitive. I needed an upgrade. I've come onto job sites where someone else has run the RJ45 and nothing is labeled. I'm standing in front of a 24/48 port switch (nothing in the port description) and users are having connectivity issues: the 'wand' in this Kit is extremely useful. Once I've track down the local and distant ends, a quick 'pin-out' check (a diagram on screen that shows any 'shorts' or 'crosses' that's stopped me from tampering with someone's laptop >ipconfig /flushdns/renew/release) and I've eliminated one more point of failure. Haven't utilized the PowerOverEthernet or Length features. I've tested them, but not able to put the information (power output) to use as I wont be familiar with the end device and it's power requirements. That's troubleshooting configuration setting, not cable integrity. There are higher end testers that can conduct speed and ping tests on a port (you'll need the port config's and again: that's beyond cable integrity), or tell you what type of device is on the distant end. If you really need to dig that deep, you should have remote access to the switch, router, hub, bridge...etc, and see at the exact setting the cable was dedicated for, and not through some scanner. You should also have some understanding of the network design. Unless the contractor who laid the cabling had no consistency when dedicating jacket colors to end devices. For example: blue cable jackets will always go to workstations, white cable jackets will always go to Hot Spots, black - cameras, grey - VoIP phones... These higher end testers can come with a lot of fancy features, but rarely will they be of use. For troubleshooting layer 1 issues, this kit has everything you'll need. Even if a cable is 100%, being able to isolate what port it is plugged into on a switch lunges you into the next step of troubleshooting. Countless times: it was either a wrong port, or a port configuration. With the wand, I moved along in the elimination process SOO much faster.

Quickly, let me say an excellent tool for the money. Sure, it is not built like "professional" models, but has a nice consumer feel for what it is. So far I had no issue with any of the functions. The little extras are nice, and think it is great you can also (carefully) plug in RJ11 and test those cables as well. Ever wonder about the true length of a coiled phone cable? Probably not. But now I know, and that is what maters. I love how the display shows a simply LCD graphic of things. Much better than blinking lights and wot not. Easy to see at a glance if wires are good, crossed or shorted. My favorite feature is measuring length of cable. Time Domain Reflectometers to measure length once cost hundreds, of not thousands of dollars. I get that and more for under 50 bucks? I like that the included case is plain with no logo. I don't like to advertise the tech I am carrying. I might have preferred a more neutral color, such as a shade of gray. But still a practical case. Absolutely worth it, even though the manual has some spelling and minor grammatical errors. I made some minor revisions myself in a PDF editor. Get one!

Todo segun lo esperado, ya habia comprado uno antes pero de tanto uso lo renove y no mas que decir, funciona a la perfección para hacer búsquedas de cableado y test de cables ponchados.

Works great under ideal circumstances. Length function seems quite accurate and, if it shows different lengths, helps determine bad wires/connectors. Continuity test, flash test, reading POE signal, and sending a signal over a wire so I can detect it with the wand all work. Length shows pairs of wires, continuity shows each individual wire. I had space so I added a punchdown tool to my kit. Also, the buttons can press easily through the case so I added some hot glue around the power buttons. The tester works for about 5-10 minutes in sub zero temperatures. Haven't dropped it yet but it doesn't appear to have any protection against that. Tester uses 3x AAA batteries. Wand uses 9v. Would be cool if they used the same type or even cooler if they had usb charging. Still a good product, but room for improvement.

I'm a service technician. Took this turd to work and told another tech " Hey I got this new tool, we can use it to figure out the problem" but it didn't do any of the functions it claimed. >TEST DATA LINE- FAIL >TONE GENERATOR AND WAND-YOU NEED SUPER SONIC HEARING TO HEAR THE SIGNAL, FAIL >FAULT DISTANCE LOCATOR-CANT FIND A LINE FAULT IF YOU CANT TEST A LINE, FAIL All my besties at work made fun of me for a long time and wouldn't let me sit with them at lunch afterwards. 🥺

Lätt att använda

Rénovant ma maison, j’avais un problème sur un des câbles ethernet que j’avais installé ainsi qu’une alimentation défaillante de mon switch PoE dans tous les câbles (cat. 6a STP). Ne souhaitant pas mettre une fortune dans un testeur de câble réseau, j’ai choisi celui-ci vu que les commentaires disaient qu’il faisait le travail. Ce testeur permet, entre autres, de tester les défauts de câbles (paires, court-circuit…), de mesurer la longueur d’un câble, de connaître l’emplacement du défaut du câble, de réaliser des tests PoE, bref, tout ce dont j’avais besoin sans que le testeur ne soit hyper sophistiqué. Eh bien ! je ne suis pas déçu ! J’ai trouvé la panne du câble qui avait tout simplement quelques brins coupés pas assez ras au niveau du connecteur RJ45 et j’ai résolu mon problème d’alim PoE dans la foulée tout en voyant que circulaient 1 Gbps de données dans les câbles. Ce qui m’a fait déduire que ma TV connectée, pourtant très récente, bridait les données ethernet à 100 Mbps. Pas grave. Tout fonctionne à merveille maintenant. Cerise sur le gâteau : j’avais lu, sur d’autres commentaires, que la notice n’était qu’en anglais et que les piles n’étaient pas livrées. Pour ma part, ma boîte contenait une notice en français, en anglais, en allemand et en espagnol ainsi qu’1 pile 9V et 3 piles AAA.

LAN Tester con Scan, attrezzo che funziona benissimo

He probado de infinidad de marcas conocidas y éste funciona genial y es muy barato

I've used this lots for tracing network cables around the house, testing newly terminated network connections and for checking lengths, and it works brilliantly, it's been so useful. Other than remembering to move to the right network connection on the tester when you change modes, it couldn't be easier. The included cables are for Cat 3 voice connections, so if you're testing a Cat 5/6 connection don't use those, use another cable if you're testing say a socket, otherwise it will only test 3 out of the 4 pairs.