Ensenior 12 Pack 6 Inch LED Recessed Light, Dimmable, 3000K-5000K 3CCT, 1050LM High Brightness, 12W 120V, Damp Rated, Ultra-Thin Canless Wafer Ceiling Light - ETL & FCC & IC

I recently installed drop ceiling tile covers in our basement to replace/hide those old chalky ones and also replaced old can ceiling lighting which used a big metal housing above the tile.These lights are lightweight, the wiring is easy to connect into the junction box provided and it's literally plug and play. When connecting the wires to the adapter inside the junction box, turning the adapter clockwise while pushing the wire inside makes it very easy. It's in the directions but I didn't read them so it ook me a few times to figure out why the connections weren't holding. To remove the wire, you can't just pull out. You turn counterclockwise while pulling the wire out. Quite simple actually.There is a circle template provide to make exact cuts in the ceiling for the light to fit securely. In my case, to cut holes in the drop ceiling tiles, I bought a Goldblatt G05141 drywall circle cutter and set it to match the dimensions of the circle template. Easy peezy.For every tile covered, I put the old chalky tile on top. For the ones with a light, the chalky board rests on top as well but I didn't attach the light fixture to the chalky board and instead attached to the tile cover itself. The cover is thin plastic so when attached to the old board, the light would press up causing an indention in the plastic tile. The fixtures are light enough to where I attached them to the plastic tile itself using a piece of regalar cardboard for the fixture springs and it doesn't droop. For the junction box, I just placed that on top of the old tile. Hope that made sense.Some reviewers said the lights didn't dim enough. I bought a Lutron DVCL-153P-GR LED+ dimmer switch with a Lutron Claro cover. I don't know if the switch is on the compatibility list or not but there is no buzzing etc. It works great. Inside the switch, there is a dimming adjust "knob". In some rooms, I moved it to the lowest setting and it's very dim with the slider moved to the bottom and bright enough with the slide moved all the way up. For example, when I start my day in the home office, I turn on the lights at very dim and then gradually slide up during the day. For other rooms, I start out at the brightest setting. It's a very nice feature on that switch.For color of light. I'm glad I chose at least 3 options (3/4/5K). I chose to use 4K which I think is a nuetral light. 5K was a bit too harsh and 3K a bit to yellow for my taste. I think if I purchased the fixture with more options, I'd have a hard time making a decision. Lol. The cool thing is that you can easily change the color temp at any time. Example: I'm not sold on the neutral light in a bathroom so I may move the switch to 3K.The lights are more than bright enough and cover a good amount of area.For Customer Service. I cannot say enough kind things about them. One of my lights was missing a spring. The lights come with 2 springs attached to the light. In most cases, especially mine, you need both springs to securely attach the lights to a ceiling. I emailed support, they responded very, very fast. I explained my situation and they sent me out a replacement fixtuee immediately. I don't often get fast responses or resolution from many companies unfortunately.I recently bought an additional 4 pack of these same lights to finish up another room. No issues, they work great just like all the others.It's amazing how much easier these are to install vs those big metal can light fixtures.Hope this review helps others.

Installation was extremely easy in my case. I had a 6 inch hole saw. I just enlarged the 2 inch hole from my previous light fixtures and swapped wires. Then just set the switch to my desired color and snapped in the light. The lights are very lightweight and produce a nice diffused light pattern. I really like them over our older halogen m12 type lighting. I'll update my review should anything change.Update:I wanted to add that due to the lights being so slim, I was able to install them in an area even when framing was located directly above the 1/2 inch soffit. I had a hole cut and the roof framing was located right at the edge of the hole. I would not be able to fit a standard housing light because the housing would hit the framing. With these, the lights do not extended deep enough into the hole to be an issue. I was able to fit the lighting easily. Another reason for the 5 star review.

Overall very pleased. Very uniform brightness throughout the 12-pack. I used the middle temp setting (3500K). I daisy-chained 12 of these together and, so far, all have are working fine. You can wire these with 12/2 wire (12 gauge will fit snugly into the wire connectors) although if you have to pull a wire out of the connector, you may have to use another hole as the initial hole used may be "widened" so the next try won't fit snugly. 12 gauge is much tougher to work with as it is much stiffer that 14 gauge and bending the connected wires into the junction box is a little more difficult. Also easy to cut off the connector and use wire nuts. I used standard Romex clamps.

I bought 2 packages of 12 of these Ultra Thin (drywall thickness) LED ceiling fixtures. I installed 8 of them in my kitchen, 4 in the family room, and am planning on installing more. Out of these, one started blinking on and off after it was on for a couple of hours. I swapped out a light. No change. I contacted the seller, and they are sending me replacements. The turnaround was less than a day. I installed a different electrical connection box (that sits on top of the drywall) and this one is working fine.I can't say enough about the level of customer service from Ensenior. I was beyond the Amazon return window and they simply said contact the seller (they have a 5 year warranty).If you are hesitant about buying these, don't be. They are fantastic and do not need a can in the ceiling. That means that even if there is a rafter right above where you want to put the light, no problem.Great product and great customer service.

Hubby and I installed this over the weekend. Super easy to connect and install. I don't know why we didn't do this sooner!! Hardest part is measuring and cutting holes, after that, it's a breeze. Great product.

Electrician had originally installed the light mounting box in a terrible location right next to a ceiling vent, so the last owner installed a ceiling fan. Was able to cut the box out and daisy chain from that point to 4 other new holes in the room. Still only using 60W of power and the room went from very dark to brilliantly bright!Flush mount looks so much better and cleaner, especially with our 8' ceilings. Even makes the room seem larger. Trying to talk my wife into letting me install more around the house!Only down side is that these don't come with the 1/2" plastic electrical knockout bushings needed to be safely installed. Had to go by Home Depot in the middle of the project with drywall dust all over me. Be sure to buy the bushings before you begin!

The box is flimsy and small to put more than one 14/2 wire. It can cut the skin easily as the edges are very sharp. the lights are much less brighter than the manufacturer claims. The ideal spacing between the lights should be five feet the 7 as the manufacturer suggests.Amaon delivery is much to desire for. It took a week for the shipment to arrive. If I could get these lights at local hardware store I would not order it on Amazon.

The lights arrived well packaged c/w instructions and cut out template. I invested in a 4-1/8" dia. hole cutter for my drill( very quick) The installation was so easy. I selected the 750 lumen warm light version as I prefer the natural old school warm look of incandescent lights. I put 9 lights in a 20ft x 13ft room and it is plenty bright. I suggest you use a dimmer switch for tv rooms. Make sure you buy the grommets to hold and protect the wires. I was sceptical about the push in wire connectors but wow, so nice to work with. You have to use them as there is no room in the box for standard twist wire connectors. Highly recommend this product

Highly recommended. 3 months post installation and my wife, the chief product reviewer in our house, and I continue to be impressed with these lights, so much so that I will be buying them again for my upcoming basement reno. Light intensity ranges from a very low level, without any flickering or hum at all using a Lutron Maestro MACL-153M dimmer, up to very bright. The ability to change the color tone (we chose 4000K) helped to adjust to the ambiance of our kitchen decor. The one critique I had regarding the size of the wiring box is minor in comparison to the performance of these lights. Ensenior reached out to me because of this issue and I found them to be genuinely interested in customer feedback. 5 Stars also to Ensenior.Overall: Very satisfied!Pros: Very bright light with selectable LED coloration; fits tight to ceiling (note - foam gasket is not necessary if not installing in a damp environment); works with my existing Lutron Maestro MACL-153M dimmer; powered 11 lights; relatively easy to install* and great overall.Cons: *The box is quite small, especially if you are daisy chaining the lights as would be the case in most installations in Canada using 14GA wiring. I would suggest that the box could be 2 or 3 inches longer to accommodate the above.

We replaced 2 recessed pot lights with 6 of these and our chandelier in our dining room with another 6. When we turned the lights on for the first time, it was like having a brand new kitchen.They are very simple to install, I have no experience with electrical work, just watched a few videos on YouTube on how to properly install these. They look amazing, and it's nice being able to select the light setting you want, we went with 4500K.Definetly worth the money.

I do love lights. But if you have to change one out light this often then its not a good deal no more.. hoping to send back one light.. for exchange. .......UPDATE......................Ok.. so this company went above AND BEYOND for me and fixed issue of my light.and ensured me that this is rare but it happens.. custom service it buy far Top Shelf 👌.. after how fast they got back to me.. id say buy these lights cause company stands behind there stuff.. thank you..

I love these things (12 pack 4Inch LED Recessed Slim Pot Light with Junction Box) 5 selectable color temperatures means you can select warm white to harsh white to match the room, dimmable and don't make any buzzing noise (but that might depend on your dimmer). So slim they install anywhere even if there is a joist right where you want to put one, these are getting installed all over the place in my house!! A couple of things that could make them even better -1. If the junction box was just an inch bigger it would make installation so much easier.2. Make sure the wire is properly seated in the wire splice block before cramming it into the box coz the wires can pop out - even better replace them with Wago lever locks which is what I did.3. Why don't they chuck in some 1/2 inch plastic romex cable connectors? - for a couple of cents each it would just be a nice touch.4. Buy extras / spares - they're cheap so grab a few spares for if/when some fail in case you can't get them anymore in the future.5. Get a good hole cutter and you won't regret it, I got the Milwaukee adjustable hole saw (C$35) and it's worked really well so far (about 40 nice clean holes).6. Don't skimp on the number you plan to install, with 8ft ceilings if you don't install enough you can end up with dark spots in your room, but this is the same with any pot lights so read up about standard spacing for pot light installations.7. Buy a good dimmer if you want to dim them, if you get a cheap crap dimmer switch you will regret it.Most of my comments above are just tips / advice and not criticizing the product itself, becuase these LED pot lights are fantastic.