TCMT Detachable Docking Hardware Kit Fit For Harley Deluxe Heritage Classic Softail Slim Fat Bob Low Rider FLDE FLHC FLHCS FLSL FXBB FXFB FXFBS FLSB FXLR FXLRS and Fit For FXST 18-Up

Direct fit on my '21 Heritage 114, including using the original T45 bolts. FYI, two of these spacers are slightly narrower than the other two. Put these narrower spacers in the front, closer to the handlebars. On a Heritage specifically, just remove the OEM spacers from the saddlebag bolts and put these new spacers in their place, with the flat face against the saddlebag, flange face against the bike. There should be little o-rings in there too, between the flange face and the bike. Add a little blue Loctite and put it together. Easy!

At first I only received the sissy bar and pad and I thought they forgot the hardware. I contacted them and quickly got a response that the hardware was a separate package and I was given a tracking number for it. The hardware came the next day. The install was easy. The fit was perfect on my 2024 Street Bob. Looks great, quality seems good. Customer service was great.M M

It a hold down for my truck storage cover

Advertised that it would come with docking kit. Only came with sissy bar. Great that I could put a different pad on the back. But can’t really use it without the docking kit.Update: seller sent missing parts and was fast responding to my inquiry

This Standard Sissy Bar Upright Backrest does properly on a FLHC/S Heritage Classic with stock saddlebags. Here’s my experience and things to look out for.1. Remove your saddlebags. On the bag bolts are a black spacer which is held on by a small black “O” ring. Pull or twist the black spacer off a LITTLE to reveal the “O” ring. Once you see it, roll it off the bolt the rest of the way with your fingers.2. Replace the stock black spacers with the supplied docking spacers. Install the all silver docking spacer on the left/front and the black docking spacer on the right/rear. Make sure the left and right docking spacers line up evenly. Mine didn’t. The left spacer sat a little further back than the right spacer. I used a supplied washer to make them even.3: Remember to “roll” the “O” rings back on the bolts. Reinstall the saddlebags.4. Now for the Sissy bar. I could not put the Sissy bar on the docking bolts with the passenger seat on the bike. Take the passenger seat off first.5. Next, I lined up the Sissy bar with the docking spacers, but the Sissy bar mounts were slightly too narrow. With my hands, I was able to “spread” the Sissy bar over the docking spacers, working one side, then the other. It was not that hard to do.6. With the Sissy bar now resting on the docking spacers, MAKE SURE to “snap” the Sissy bar onto the front and then rear docking bar spacers. You should hear/feel the bar snap into place.7. Passenger Seat. You cannot reinstall the passenger seat like you normally would (pointing the front end in first). Slide the passenger seat in sideways (point the front toward the fender), THEN twist and position the seat to the front of the bike on the seat mounts. It’s easy once you do it the first time.8. Install the Sissy bar pad on the bar and you’re done. The fit ie snug and secure.I might have made the install sound harder than it should have been. It really wasn’t. Just trying to point out some of the things you might run into. Enjoy. Ride safe.

Item arrived with no mounting hardware, contacted seller and was told they don’t include the quick release hardware needed to mount it on the bike, so I have no idea how well it works or if it’s sturdy. I guess my passengers can hold the sissy bar against their back on rides.

I have a 2021 HD Heritage and I needed to add a backrest for the back rider. Had to change the hardware to the saddle bags to do so. Stainless steel. Went together like it’s supposed to.

I thought the docking hardware was rather expensive for a couple of lugs and some washers and some boats they did work on my bike and I'm glad that I bought them but again all I needed was four of the lugs didn't need any boats I used the same bolts for my saddlebags so I had a lot of hardware left over I didn't even need but this was my first rodeo so I have learned from it but on all I'm pleased I did get my sissy bar attached today been waiting for a while but the wage is over thank you Amazon and whoever the product provider is. With regards Bill Reed

Pour fixer porte bagages Quick release à mon bike

This sissy bar is great fits perfectly looks brilliant I’m so glad I chose this one would recommend

Not exactly harley quality but definitely does what its supposed to