ORACLE Lighting 5861-504 Sidetrack LED Lighting System fits 2018 2024 Wrangler JL & 2020 2024 Gladiator JT - Illuminate Outside Area

Please understand the product is wonderful but you need a professional auto electrical installation who will have in stock all new plastic rivets for the inner fenders that must be taken off and reassembled after installation. Installer must use shrink wrap to ensure that the connections are perfect and Tuck all the wiring far away from any heat source. You also will need more wiring on hand which does not come with the kit.The adhesive tape is useless so make sure you have a clear gel gorilla glue for a tight Bond otherwise it will fall off and this too does not come with your kit.Last note, if you look at almost all the YouTube videos on installation you will notice in the background that their professional auto mechanics and they're in a shop or garage that is fully equipped to handle electrical installations and wiring but they won't tell you that if you think you can do it yourself think again it's not very easy it's a difficult but rewarding product when done right.Thank you,Dr. Gary Goldberg, Jeep enthusiast for life

Not hard to install if you know what you are doing. If you don't have experience removing plastic rivets in the fender well and tapping into wires then you might consider having your jeep mechanic do the install for you. If you do the install yourself, have 20 black plastic "Christmas tree" fasteners to replace the rivets. Also save yourself some trouble and instead of going through the firewall on the passenger side to tap into the footwell light, run a jumper across the top of the engine compartment and tap into the driver side white wire that runs through the firewall. This will save you about 40 mins of headache. Overall I couldn't be happier with the quality, the instructions or the finished product. The light look awesome and work great!

These lights fit great. Love that when you open your door it shines down toward the floor for safety. Also when you hit the turn signal, it shines amber. Perfect addition to our Jeep

Had these lights professionally installed after seeing them on another Jeep. They’re bright and add a really nice custom look to our Jeep Gladiator. Very happy with this purchase!

The install required a little bit of cursing, but I managed to get them in line perfectly and they stay on great. I am not a fan of the line taps that come with this kit, and will likely redo them with my own or solder them, but the wiring has been holding up so far. Tapping into the turn signals was the hardest part, but I managed to just pull the fender lining away and reach for the connector from under the car without disassembling anything. Might be easier if you're willing to curse at it or you have small fingers like me.

Great product made with quality in mind. View YouTube videos before installing. Do not follow the instructions included in the box. One video shows how to splice the passenger side to the driver’s side thus eliminating the need to go through the passenger side firewall and connect with the passenger interior light. Keep in mind that when you lock/unlock the vehicle both yellow turn light and white curtesy light light up, not a big deal.

The only reason I don't give it a 5 start...is because of the 3m tape on the unit. ( it sucks). Other than that...I love the product. 😁

Had it on for a month and one side light fell off. Attempted to “fix” it but kept falling off. Dangerous when driving as it could rip out the wires and hit another vehicle. Contacted seller and manufacturer, neither were willing to step up. Hopefully Amazon will save the day.