3 idea Imagine Create Print ANYCUBIC Wash and Cure Box for Mars Photons LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box Cleaning Machine 2 in 1

Buenos productos

Over all, this is a very good product. However, to cut to the chase, I prefer using an ultrasonic cleaner and a homemade UV curing chamber. Here are a few of the pros, cons, and reasons to back up my preferences. Pros: Simplicity (Two machines in one) Pretty good at washing parts (reason for "Pretty good" explained later) Amazing at curing parts (the UV LEDs are super powerful) Attention to safety (the lid is UV blocking and there is a safety switch that shuts down the machine if the lid is removed) Simple user interface Works with a pretty small amount of cleaning fluid (there is an included bracket that lowers the bed to the surface of the liquid) Cons: Price (see below for further detail) Can't use both the cleaning and curing features simultaneously In all, this is a very useful piece of equipment. However, let's go into further detail on a couple of the points made above. Let's start with my comment that it does a "Pretty good" job at cleaning. Though the cleaning system does a surprisingly decent job at removing excess resin from the surface of the prints, it lacks the penetrating capability of an ultrasonic cleaner. With an ultrasonic cleaner, the part gets cleaned inside and out. This is important because resin printers can't really print infill. This means that either you print with 100% infill (i.e. solid) or no infill (i.e. hollow). Because the ultrasonic cleaner uses, well, ultrasonic waves to clean, these waves can penetrate the walls of the print and clean the inside as well. And finally, let's talk price. Though this machine is pretty good at what it does, I don't think it is worth the $150 price tag (as is the price at the time of the writing of this review). I say this because of the all the other methods of doing the things this machine does (sometimes even better) but at a cheaper price. For example, I can get an ultrasonic cleaner (big enough to put the entire build plate into) for around $80 and a string of UV LEDs for $10. So, with a little DIY (to build the curing chamber) I can have equivalent capability for $60 less. In conclusion, this is an all around good machine. I believe that you can make something better, but, since this is the only all-in-one cure/wash station I can find, I would recommend it to anybody that doesn't want to mess with the DIY side.

Great price and gets the job done.

Good little machine though when washing prints you can get wee bits of resin or cured resin that get stuck in the impeller, you will hear a clunk sound but luckily the machine kicks it back out and keeps going. The curing part is fine.

funciona muy bien, lo unico que debi comprar la mas grande ya que tengo la ANYCUBIC Photon Mono X 6Ks, y la placa cabe muyyyy apenas dentro del contenedor para lavarla, pero pues lo principal del lavado de piezas funciona bien.