Best Choice Products Oversized Padded Zero Gravity Chair, Folding Outdoor Patio Recliner, XL Anti Gravity Lounger for Backyard w/Headrest, Cup Holder, Side Tray, Polyester Mesh - Black/Blue

This is the second one I’ve bought. It is really easy to operate, very comfortable, and reasonably priced. I read a post dated July 9th by Sureshoe on this chair and took his advice and have a bit more to add.First, Sureshoe suggested tightening the screws some to prevent the nut from coming off. Great idea. Now, add to that some LocTight/ thread lock compound to the threads exposed as in pic. This will add to the probability of the nut staying on.Second, I took some 3/4” foam pipe insulation (3/4” hole and about 2” in diameter), made a slit along the slit line in the foam tubing and cut four 5” pieces to attach to the corner bottom braces so as to buffer the hard ground or ground irregularities. By protecting the braces this way, the plastic is less likely to wear out or crack. They are attached with two zip ties. Next, I attached about a 20” or so piece of the same foam pipe insulation around the lower part that comes up to meet/hold one’s feet. The pic shows the three zip ties I used…..with…..the pulled out tabs for tightening the zip ties facing downward away from where my legs/feet will rest. Now the chair is, imho, perfect. It rests on padding not wearing out the plastic corner braces, has padding for my feet, and the nuts are more firmly set and less likely to loosen up and fall off.I have owned many of such chairs for camping, porch use, and for hours of sitting at car shows and these are simply THE best I’ve come across.After a while with the “pool noodle like” foam pipe insulation, I replaced them with a denser foam pipe insulation and put a rubber tape on the bottoms to protect the insulation from an abrasive ground. The cheaper pool noodle type foam tended to pop/crush real easily causing me to redo with the denser pipe insulation. I also double rolled with pipe insulation the foot rest so there is no digging into the backs of your legs when resting your feet/legs on it. I used 3/4” ID for the covering of the metal leg piece and 11/4” ID to go over the first covering. Using the next size bigger allows for a more thorough wrap on top of the first. Btw…..when I put the foam on the bar prior to the zip ties, I put rubber cement on the metal bar and the inside of the foam so as to prevent free rolling. I also used rubber cement on the outside of the first foam and on the inside of the second foam all prior to doing up the zip ties. See pics 4-7. This did not take too long to do and is well worth the effort. It also does not cost much to do. Both my chairs have been working great and my long legs no longer get that “dug in” soreness after resting them on the double-padded foot rest while napping in the chair on my porch.

EDIT ONE YEAR LATER:I’ve gone from 4 stars to 5 since nothing of note has failed and the reclined-position clamps are a little softer but still workable. The fabric and elastics have withstood the Arizona sun and heat and dryness. And the cushions are still about 60% as plump as new which is reasonable for the price and Chinese origin. Only trouble has been that a lock nut silently came loose producing a sudden slump and ominous cracking sound which turned out to be just plastic slapping plastic. So it was off to the hardware store for an M6 locknut since I’d lost the one that came off. So a bit tedious but as you can tell I’m in love with this chair. And finally the arms of the chair, being made of Nylabone-like material, are excellent chew toys for our other love. See pix.EDIT ENDSThis lounge is comfortable and easy to carry and unfold. And to my relief there was no assembly required at all. And it’s sort of sturdy as well — I’m 5’11” and 188 lbs. It’s also attractive (I got the grey and brown or whatever). And at a good price. So far it’s 5 stars. But here’s the catch.There are at least two weak spots that could kind of spoil your day. First is the thin-ish elastic cord that weaves back and forth between the grommets on the seating fabric and the metal frame. If the cord gets abraided from the load-unload cycle of sitting down and getting up, then, when the cord ultimately fails over time the whole side of the seating fabric will fall at once. This could give you a good thump in the pants and maybe an hour of DIY weaving and knotting and still be waiting for the next failure.The other thing is the clamping setup which allows you to recline to any desired angle from min to max and then lock in place. The clamp feels like it will slowly lose its grip so the chair may rock instead of staying put over time.All told I really like this lounge and will just treat it gently so that my old body will fail before my new favorite napping spot does.

The chair is overall good; not quite perfect but then again perfection is probably impossible. Good stuff: (1) attractive in the green and black version; (2) easy to fold and unfold; (3) comfortable enough to sleep okay in overnight.What could be improved (1) the cross-bar at the foot end of the chair is bare metal and not real uncomfortable when the backs of my lower legs are resting on top of it for a long period of time; (2) the neck pillow is too small to provide a lot of comfort, although it does some good and is not totally useless. I felt secure in the chair at 175 LBS, but I don't think I'd feel secure if I were 275 LBS. Overall definitely worth the price.

Excellent, well-constructed and comfortable chair. I'm 6'1" 225lb, and the chair handles me easily. Easy to port to the Beach, by the pool, or to a neighborhood social fxn. Highly recommend.

Not exactly as dark as I'd like but super comfortable 👌 N great value

I love my chair. I actually used it to sleep in when I was in the process of moving and the bed was gone. I had a good night's sleep and I was k looking forward to using it more. I may get another!