7 Inch LED Halo Headlights with Turn Signal Amber DRL White+ 4 '' Halo Fog Lights for Jeep Wrangler 1997-2017 JK JKU TJ LJ Rubicon Sahara Unlimited White DRL/Amber

These lights perform exactly as advertised. Install was not difficult. It took less than 2 hours to install the headlights in my 2013 Wrangler Unlimited. That includes wiring the white halos as daytime running lights when the vehicle is on and the amber halos to blink with the turn signals.The directions included are not really adequate, but there are a lot of YouTube videos showing exactly how to install and wire the lights. Spending a little time watching the videos and learning how to install them before I even opened the box helped a lot.With the stock headlights, sometimes I couldn't even tell if they were on at dusk, and they were very poor driving lights at night. These headlights are much much brighter, with a better color. It's almost like having a new Jeep with the daytime running lights, amber halo turn signals and super bright headlights. I'm very pleased with them and so glad I didn't spend two to six times more for another brand.The only issue I had was with the driver's side headlight bright light not working. I contacted Sunpie using the directions included and they promptly sent a new anti flicker canbus box. That solved the problem the first time. Very good customer service.

Well all I can say is the lights are awesome. First the packaging is rock solid. I was a bit concerned about the headlights being shipped via fedex. I know those carriers just throw parcels on a conveyer belt and let them tumble around. The packaging is as good as I have ever received. The styrofoam is so dense that the products can’t move and shake around.The product instructions are easy to follow, and other that a screwdriver and a few zapstraps they went in with out a problem. If you have an aftermarket bumper like I do, it was a bit challenging getting the fog lights in. But with some help it was in after about an hour of fumbling around. Remember both the headlights and the fogs need to be adjusted.The lights look amazing, I wired the halo directly to the battery and through the fuse box. So the halo run right when the jeep is turned on. After some adjusting (in the rain) I got the beams adjusted correctly. If you need some guidance on adjusting your headlights you will find lots of videos on YouTube. Overall the quality of the lights are super, I have no complaints at all. For the price you can not get a better deal. This combo is amazing.Oh and I almost forgot NO FLICKER!

These are very nice JWS copies for 1/5th the price. Very bright, nice DRL look. A few things to note when installed on my 1999 Jeep TJ Wrangler1. The DRLs are not a continuous LED tube so you can see each individual LED beneath the masking, minor but takes away from the look.2. DRLs turn off (or dim to a negligible brightness) when you turn your headlights on.3. Depending on the year of your vehicle you may need to make minor modifications to the stock housing. The secondary ring behind the main housing mount has a protrusion for a screw that mounts it to the body. You will likely have to grind this down as the rear of the headlight is going to hit it. It's just hard plastic so a dremel does fine.All in all, the minor gripes are made up by the fact that these aren't $600

I installed these Halo LED projection headlight and fog light kit earlier this year. I absolutely love that they turn night into day. They are a significant increase in visibility down the road over the stock headlamps. The headlamps for both high beam and low beam are plug and play. The halos do require some wiring knowledge and skills in running/splicing new wire. This was not included in the instructions that come with the lights. As all JKU's before 2017 did not have DRL's, I wired my halos to be my constant on day time running lamps. This was accomplished by adding a "Add a fuse" fuse circuit to the fuse box. I added this to the M9 slot which gave me a constant on of the white halo when the ignition on. I ran new wire from the fuse box to both headlamps and fogs to power the halos of both. I also wired in the halos (of headlamps) to my turn signals so that when the signal is activated the yellow amber light over rides the white halo on that side. The headlamps and fog lights did need to be re-aimed via the adjustments on the Jeeps mount housings. This was a very easy project that took less than 15 minutes. Recently, I have had one fog lamp burn out, unlike that factory lights that you can change out the bulb, these are sealed therefore that fog did need replaced. Sunpie/Eurolite (via Amazon) has done a great job at warranting the product and standing behind it, these lights do have a 6 month warranty. Overall, I give the lights a 5 star review and I do believe that they deserve it based on their performance and the companies customer service. Yes, they are more challenging to install, however, with simple wiring knowledge this is easily addressed. You as a buyer are not spending $500-$700 on J.W. Speaker lights that are probably more user friendly in installation. However, you are getting equal performance.

Easy to installed to my 2015 jeep. Pri e was pretty good.