PEI Sheet PEI Spring Steel 235x235 and Magnetic Build Plate with Adhesive PEI Bed for Ender-3 Pro/Neo, Ender-3 V2/Neo，Ender-3/Neo 3D Printers

So i got this because of the rave reviews and the ease of removing the plate from the bed. I was using the glass plate that came with my CR10, and some adhesive textured pads. Changing the pads out was a pain, and the residue made it difficult to get an even surface when replacing them. This would have solved all of those problems, if only i knew the metal bed to my printer was not even. I learned after installing this that it dips in the middle, which is why i was having problems getting this plate to work right. Thankfully i got the magnetic layer up without damage, and ill unfortunately have to go back to using the glass that i know was level. i might rig another glass plate with the stainless steel plate of this product, and go from there. I will say that it installed and functioned very well, for as far as i got with it. the texture was good, the plate was flat and even, and the magnetic pad was easy to stick on there. If only my printer was willing to cooperate.

This bed is a excellent choice for those that don't want to use glass and want an option for great adhesion and easy removal of prints. I would recommend this bed for anyone who enjoys ease of use and quality of life.

I was using the bed that came with my ender 3 v2 and thought it was pretty good. Well I was having trouble with abs adhesion so I decided to level the the bed closer to the nozzle. Big mistake. It adhered to the texture of the bed to the point I couldn't get it off. So I decided that I would use acetone to clean the bed. This was the nail in the coffin. It delaminate the top layer of the original bed. So I started looking through Amazon for a new bed. This one had great reviews so I decided to try it. Man printing has never been easier. My old bed had to be leveled every few prints. This one hasn't had to be leveled since I first installed it and have 20+ prints including one 25 hour print and counting. Abs does well and pla/ tpu is a breeze. No issues with adhesion and once the bed cools, the parts can almost be blown off. The only issue is that if you have a power outage and the bed cools, you will have to restart the print. Best settings for pla for me are 60°C bed temp and 210°C nozzle temp and you can run 90 mm/s. If you don't want strings (I usually just run a lighter over the print to remove so nbd for me but.. ) I recommend 70 mm/s or slower. I have an ender 3 v2 so keep that in mind for those settings. But for sure worth a buy haven't had the chance to use the flat side. 100% worth the money.

Upgraded from a textured glass bed and this bed is everything I've dreamed of. Perfect fit for my ender 3, prints stick flawlessly and release flawlessly on cooldown

Just as advertised. Better bed adhesion. Easy to use. Just slap and go. The lettering fell off in minutes, but that doesn’t affect the performance.

If you’ve a heated bed, this plate is awesome. Much better than the cool plate that came with Bambu printers in terms of adhesion and release.Pla sticks really well for me at 55C with the door open. Then releases instantly once cools down to 35C. The only tough part is my impatience waiting for the plate to cool.One of the sides have the logo marked on it. I didn’t use that side, for fear of the logo interfering with the print. The logo is down at the bottom, so not a big concern.

Bought this sheet almost a year ago with when I was having adhesion issues with PETG on my glass build plate. The plate has held up well, only really use the textured side. My flat side did have a black mark looking like it was damage but plastic still stuck on well, I figure the damage is only really cosmetic. In some cases however adhesion is too strong with PETG to the point that it doesn't self release by itself when it cools down, which isn't a problem on my other branded PEI sheet. Not a huge since I can just flex the build plate, and releases the part easily without fail. It's a good product and would recommended for filaments like PETG and PLA.

Cleanest and most even first layers of any bed I've tried, and you can literally just pick the print up from the surface when it is cool.

The media could not be loaded.  Easy to install and use...textured side works well, I have yet to try the smooth side but like the overall construction is very nice and works better than I thought...adhesion was good at 65° and as you can see from the video, it just falls off at room temp which was a pleasant surprise...no tools needed and it gets rid of those clips to hold the bed down, magnetic is 100% the way to go...a great upgrade to any 3d printer

La calidad de esta lámina es increíble, mejora muchísimo la adhesión de la primera capa. La compré cuando la original de mi Ender se rompió al desprender una pieza (la negra, no sé de qué material es), con esta estoy seguro de que no pasará lo mismo porque en cuanto la cama se enfría las piezas se despegan por arte de magia, ni siquiera tengo que flexionar la lámina. Tiene PEI por ambos lados así que sé que me va a durar muchísimo. Fue una gran compra

Ich habe schon diverse Stahl Kunststoff etc. Druckbettplatten ausprobiert. Das hier ist mit Abstand bisher das Beste sowohl bei Haftung als auch Wärme Stabilität und super robust. Während die Platte geheizt wird hält bisher jedes Filament. Nachdem die Platte abgekühlt ist das "Projekt" einfach abnehmen. Absolute Kaufempfehlung, sollte meine aktuelle Drucklatte Iirgendwann (!?!) mal durch sein, werde ich immer wider auf diese zurück kommen!

Grazie a questo piatto PEI ho risolto tutti i problemi di adesione con il PETG e ora le mie stampe sono perfette. Nelle istruzioni ocnsigliano un riscaldamento a 90° per il PETG ma nel mio caso funziona bene a 80°, sicuramente dipende anche dal materiale usato. E' stata una svolta perchè con il piatto originale della Artillery Genius non c'era modo di far aderire bene il PETG, ora va come un treno. Estremamente soddisfatto.

I recently bought my first 3D printer, an Ender 3 S1, and whilst there is nothing wrong with the stock bed for adhesion/removal, my only complaint is as it’s black I found it annoying when using black filament as I couldn’t see enough definition on the first layer. This HICTOP PEI replacement just went straight and on after some operator error the filament sticks very nicely and comes off easily once the bed has cooled down some. And I can see the 1st layer of black filament nice and clearly.I’m new to all this 3D printing malarkey so when I did auto bed levelling and then z offset adjustment, as this sheet is a little thinner than the stock Ender one, I got a little confused on the z offset adjustment and had the nozzle far too far away so there was no adhesion whilst printing. Pure operator error which when I took a few mins to try and work out what was wrong, I thought to myself what an idiot as it was so obvious what I was doing wrong. Ah well it’s all good now.I didn’t need this but I’m glad I got it as whilst it doesn’t fit in with the black colour scheme of Creality printers, I am more a function over form kind of person anyway and the contrast looks good to me.5 stars.