Musiclily Oversize Acoustic Guitar Self-adhesive Pickguard for Martin D28 Style guitar, Black

I used this to replace a scratched up and plain black pick guard on my wasburn Lyon full size acoustic.I noticed many reviews said this was cheap and thin, but it's the same thickness as the one I removed. And it looks fantastic.I removed the old one by carefully pealing it up, then used goo off and a guitar pick to scrape off the glue. I lined this up, out some masking tape down to show the positioning, the carefully laid it.The circle size matched the center abalone ring around my sound hole. Sure, I wish I didn't cover the abalone, but no big deal. Exactly where it goes will vary from guitar to guitar.When done I peaked off the protective coating. Easy peazy.You can see a tiny bit of the lighter color of the body as this isn't. Perfect fit, but it's an old guitar so good enough. I'm super happy!

This is a good replacement pickguard especially for a Martin dreadnaught or similar-sized guitar. It's very thin at .020/.5mm so that there is no effect on the guitar's tone. It's got good adhesive on the underside and a thin peel-off protective sheet on the top. It is slightly oversized, hardly enough to notice at approximately 1/16" all around, except on the curve where the pickguard meets the sound hole rosette. I'm very pleased with the faux tortoise design and features mentioned. The price is right as well. You can't go wrong.

Perfect for my Dag-1 guitar. I bought this guitar just meat and potatoes so I can use nothing but the body and replace everything on it with what I like to truly make it mine. This pick guard not only looks really great its also a really well made guard. Its not to thick to give the guitar that off look, the colors are a real eye catcher and the back of the guard is extremely strong with the tape hold! So many guitar owners I know that seen the guard have asked where I purchased it so they can get one for themselves. A+

Mounted beautifully. I YouTubed how and what and was very easy on my Blueridge BR-140 brand new. The original is kinda ugly in my opinion. No bubble, nice and professional looking, seriously. Awesome I have no problem buying again if I ever need to. NOT to thin like some have said it is thinner than the original that came on the Blueridge but just opens up the tone like it is supposed to.

Did you ever buy something and inside the box , along with that item, was a decal from the company you just bought from? ...Thats kinda what this pickguard is like. A decal. Now I really can't complain because I read the reviews. Theres no way Ide put this on a higher end guitar. A lower end guitar yes. So it does have it's place. ...Anyhow, just my two cents.

Was looking for a pickguard to install on a PRS Angelus. Checked out several different ones, but none measured exactly to the decorative trim around sound hole. Purchased this one and trimmed a little on the inside radius to match the trim (used a paint can as a template), then lightly sanded the edge where I trimmed it. Fit perfect and matches the black headstock! When installing get it where you want it, apply a couple of pieces of blue painters tape, fold it over, remove the backing, then fold it back in place. This way you don't risk it sticking where it's not wanted.

I am used to a lot hard Pickguard. This one is thick but flexible. It surprisingly works well and looks good once it is in place.

It’s thin but a good value for what you pay for it. If you’re putting a new guard on a high end guitar, I’d buy a replacement from the manufacturer. Had to do a little trimming to fit around the rosette I put on.

Looks good, poor adhesive. After trying to peel the 3M backing, the opposite side (underside of pickguard) had no adhesive qualities at all. Very poor don't waste your money.

Great

Good quality. Perfect fit.

Met my expectations

Not used yet but seems ok.