FEBRYTOLD 12 Pcs CV Boot Clamp, 6 Pcs Small and 6 Pcs Large Stainless Steel Universal Adjustable Stainless Steel Drive Shaft CV Boot Clamp

The clamp was the same width and thickness as the original clamp, and it seems very well made. The only difference was that the original clamp had the 3 hooks/teeth pointing away from the boot and this one has the 3 teeths pointing to the cv boot. This was not a problem for my car because the boot is very thick where the hooks are touching it. In order to protect the boot from the hooks, I cut a small piece of bicycle tire I was planning to place between the teeths of the clamp and the boot, but I did not have to use it. I replaced a loose clamp, so I only took the car tire off for this repair. Removing the old clamp was easier than I expected by inserting a screwdriver in the clamp tightening loop and rotating until the clamp hooks disengaged. Installing the new clamp in such a tight space was very easy and effortless by using a small 4" aftermarket tool similar to the one sold by Toyota. For the tool, I used a 13 mm socket to tighten the clamp.

Looked everywhere… ACE, autozone, oriellys, Napa… NOBODY had these clamps. Shipped super fast, and is a very high quality product. As others mentioned it does bite into the boot, however as long as you have a thick high quality boot you won’t have a problem. I will be ordering more!

Seems on par with OEM oetiker ear clamps, hard to find the size needed for my CV outer boot. Tried different brands (far right on pic), easily snapped off. These clamps are on par with the OEM clamps, pretty heavy duty and similar thickness. Only downside is what's mentioned in other reviews, teeth are pointing inward while OEM points outward (IMHO latter is better design). Pricewise, it's fair. I would pay a little more for these higher quality clamps than other brands listed. Others are much cheaper construction and thickness and more easily sheering. I would recommend these as the next best option!

This along with a killer clamping tool made for a small seepage that was addressed in under 15 minutes. I haven't had to use the rest of the pack but I am assuming it will hold just like the one I installed. Highly recommend!

Used it in my seadoo Pto shaft. Worked great