Coavas Window Privacy Film Sun Blocking Frosted Glass Static Clings Non Adhesive Opaque Vinyl Bathroom Door Decorative Stickers Heat Control Coverings for Home Office(11.8 x 78.7 Inch, Pure)

This is just what I was looking for. Good opacity for privacy, while still letting in plenty of light. This is my first time using this type of product and it was very easy to apply. I'm very happy with both the look and functionality of this film.

Follow the directions, as written, and this product is very easy to cut and install. I bought it to cover a large glass window in a front door of a rental property, and the tenant loves it. It allows diffused light into the entryway, while also providing the privacy they want. I can highly recommend this product.

I had to do something to get some privacy with 18 individual window panes on an exterior door. But I didn’t want to lose the light, as those windows are the only ones on that side of the room.After reading reviews here, I chose the white film. I made a template of the window size with paper and traced it onto the back of the film, then cut.When cutting, I tried to get as close to the actual dimension of the window rather than leaving much extra because I find it kind of hard to trim it on the window after applying it.I cleaned each window with rubbing alcohol. Then I did the *hardest* part - getting the backing off the film. Took forever!! Finally figured out that it was a bit easier if I kind of roughed up an edge by scratching my fingernail along it.I had bought a small supply kit for applying the film, and it turned out to be invaluable. It came with a small spray bottle, a plastic scraper, and a small squeegee.In the spray bottle, I put water, some white vinegar, and a squeeze of dish soap. I applied that liberally to the window before applying the film. I directed the spray specifically at the top edges of the window, the top corners, and the side edges, then some sprays in the middle.Applying the film was easy. The scraper from my kit did a great job. The squeegee was surprisingly helpful on some bubbles that the scraper didn’t get. Sometimes I needed to switch up the tools on the same spot, just rotate through them. I was able to get all the bubbles out, or nearly all.I tested the windows out for privacy at night and the white film is great. Can’t see inside the room.I applied it at night so I haven’t seen the daylight effect, but I did see how much interior light was visible outside when I was testing for privacy. It showed a nice glow, so I think the sunlight will come through nicely.I’m not handy, but I was able to do this. If you get your tools together, measure carefully, use water/vinegar/dishsoap liberally, have a couple different scraper/squeegee things for getting out the bubbles, and have a little patience, you can do this!4 stars because I don’t know about longevity, but I’m thrilled with how it turned out on Day 1.

It’s been keeping us from staring at the siding of our neighbors house while still letting in the light into our dining room for more than a year and still going strong! Bonus is that it keeps the dog from barking because the neighbor kids no longer put their faces to the window and taunt the dog. Easy to put up, stayed in place minus a little bubbling in the corner. Would buy again!

Got this for our bathroom on the main floor with windows that face the street. It adds great privacy while letting light in as it covers our only front facing windows. It was really easy to install and looks awesome. I did install one when it was cold outside and there are a few bubbles on that side, but nothing too noticeable. The side I did before it was below freezing turned out amazing. It has held up so far with the constant weather changes.

Very easy to install with the instructions provided. Looks great and provides privacy.

I purchased several rolls of this in the opacity called Pure. A few factors drove my purchasing decision: THE ABILITY TO GET IT QUICKLY, attractiveness, opacity (I wanted maximum light transfer), and ease of installation. This wasn't the quickest of deliveries, but I didn't have to wait awfully long for it, so that part of the transaction was acceptable.Unfortunately, when it did arrive as two separate orders, one of the rolls delivered to me was white instead of Pure. Irritated as all get out by this for reasons I'll explain in a minute, I referred back to my order, and whoever packed my orders just flat out sent the wrong item in white instead of the correct one in Pure. This is *really bad* because now, my windows now don't match, which just looks like a trashy after thought - and that's an aesthetic that I wasn't going for, so I'm definitely not pleased with that. I would have gone through the insanely inconvenient hassle that is a return on Amazon, except that my #1 reason for ordering this was that the delivery was quick. This was purchased to accommodate a foster dog with reactivity issues who was having a rough time with visuals outside of our house: I needed something fast for his needs, and something matching, with acceptable opacity and light transfer for mine. I was flat out stuck with what was sent to me, as by its delivery time, there just wasn't the luxury or time for a return. I'm still salty about it. To make things worse, the roll of white arrived with creases that penetrated the entire roll, which presents adhesion issues during install and gives you areas afterwards where the film doesn't cling (also displeased with that). Rolls that aren't perfect shouldn't ever leave the factory OR a third-party shipper due to the nature of the product. Lastly, none of my rolls are the lengths stated in the item's description. I measured all of my windows in advance and should have had enough left over for a few more small windows if I needed it; instead, I'm significantly short. All of these things combined means that I now have a large window that had to be "patched", and since my films don't match, it looks like a hot mess. If I'd have received everything in Pure as I'd ordered, this wouldn't be noticeable to anyone but me, but with all the mistakes combined, it makes me bitter every time I look at it. (Patchy windows look bad from both inside and out!)On the positive side, it does cling very nicely. If an area pulls away, just mist the area and squeegee again to remove bubbles. I suggest using a straight edge/T-square and razor blade knife for cutting crisp edges. Have a large area for triple checking your measurements and cutting. The protective film backing sticks a little too well, so be prepared to wrestle with it and become frustrated. You'll get it off eventually, but that was the worst part of putting it up. It repositions easily, so lining up edges and corners isn't a big deal if you find it's going crooked. Large windows require two people or the weight of the film will pull it down if you're trying to put it up alone. While I'm not big on having my windows covered, it's been a really handy solution for my purpose and it would be nice after investing the time to size and cut it all to be able to re-use it in the future, though I have no idea how you'd store it.I do like the way the Pure looks, but would only order again if I could be certain that I'd get the correct product in the actual length stated (this is too expensive to not get exactly what you've paid for!)

easy to apply to window, still lets in natural light, and it does what is stated in description... cant see through it. over all I feel this was worth the money and privacy.