ANZO USA111067 Dodge Ram Crystal Black with Corner Headlight Assembly - (Sold in Pairs)

Lights are bright and are perfect for his 98’ Cummins. Very clear and well worth the money

These got put on a 1995 Ram 2500. They look pretty stock, surprisingly, which is all fine by me. The light they put out is adequate. The dims put a lot of light right in front of the vehicle, but it's pretty unevenly focused about 10-30 feet out. To the sides and far ahead they're not great. (I really appreciate my 2003 Outback stock lights now, which by comparison aren't any brighter but disperse way more evenly.) Around bends in rural areas, I feel like I need to slow down because it's so dark on the edges. The brights on the other hand seem fantastic. No complaints there at all. I had them installed by a tire shop place, so for me that was super easy. I've been parking exclusively outside through rain. No issues with water getting in yet. Overall, these have been way better than the previous stock lights where one was yellow and foggy and the other one had all the reflective bits peel off inside the light. I mean, before I couldn't even tell they were on when in the city. So the bar was low.

these lights were an awesome purchase, just enough black in the housings to not cut out much light and still look great if you are like me and arent into chrome everything. the headlights in person appear to be just a touch darker than the photo shown. the install wasnt that bad but thats because i have the trim removed from the front bumper for now. only 3 bolts but as with most headlight replacements pulling the housing out and getting the new ones in is generally the most difficult part which is no different here. These lights handle hids just fine and put off a ton of light, the light is slightly scattered due to the diamond style backing but much brighter than stock. my old housings were broken and fogged up so these just take the cake for me. For the mechanically inclined, I recommend pulling the bumper to install these headlights, much easier, risk of breaking or scratching anything is almost non existant.UPDATE: after washing the truck several times I did find some moisture in one of the corner lights. Not a huge deal but loses a star.

product is great fitting. it does have a strange "footprint" to it's beam. gotta tell you - if you have a "SPORT" model (with factory fog lights) it does wire right up. despite what the fitment chart says. the SPORT models use 2 bulbs 1-hi& 1-low beam. this is for all the other models with the 9004 type 1 bulb containing both hi and low beams in 1 bulb. there are very few companies who make the true SPORT dual bulb units, BUT there is a company that makes a conversion wiring harness to convert the two bulb to the single bulb unit, so you can do this. Spec-D makes the wiring harness and i found a retailer on ebay for them. plan on another 30-40 bucks for this. still worth while- - my old factory lenses were ghost white and i was blind at night. these are crystal clear, and look freakin awesome on my truck.

Ok. I had been researching headlamps for about 3 months. I run 55W 6000K HIDs and was VERY worried about housing meltdowns. I asked a question about this set in particular and another fellow answer that he too ran 55Ws and they took it perfectly. Well, it is TRUE. The 55W HIDs DO NOT melt these down. You can drive in peace! Also, I was concerned about leakage, but, again, these are perfectly made. It poured heavily for about 45 mins today, just after install, and neighter housing nor corner lamp have ANY sign at all of moisture. I am so friggin happy with this set. They were also very simple to install. The structure is rock solid but doesn't have the unnecassry plastic as the OEM. The stock set took some wiggling to get out, but these pop right in PERFECTLY. I'm super happy with this purchase. BY FAR the best quality! (a buddy of mine had bought some headlamps from some ebay chinashop for a Tahoe a few months back, and they were cheaply made and cracked during the install...) GO ANZO USA!!!!!!!!!!!!!! THANK YOU SO MUCH!!!!!!!!

I ordered these lights to replace the discolored standard headlights in my 1996 Dodge truck. The removal and installation went okay though the bottom bolt is difficult to access and some "persuading" out and in was required. I did not care much for the original lights because the high beams left a lot to be desired. These lights on low beam put out a conical beam that covers the lane ahead but doesn't illuminate the roadside too well. The older Lucas Lights (from England) shone a narrow "pencil" beam and these are reminiscent of those, though the beams are wider. With the Anzo lights, the low beams leave the roadsides poorly illuminated, but the high beams do a very good job. With these lights I bought PIAA Extreme White bulbs due to their better light output and I expected the Anzo lights to put out a wide, very white beam since the lenses are not fluted - but I was wrong. I'll continue adjusting them to try and find a better adjustment without blinding oncoming drivers. These lights are made in Taiwan, look good, and have no condensation in them after two weeks of Oregon rain.After more usage, I'll post an update.

These fit great and offer easy OE type adjustability vs cheep ricer one piece head lights. The light pattern isn't the best, but considering what we're dealing with in terms of bulb selection and housings type, I guess it isn't horrible. I did not use the corner lenses and went with some 100% black, no reflector types off ebay with black frame LEDs for turn signals. Really stealthy look when paired together. I will probably end up retrofitting in some HID projectors for more light output. (note: actual projectors, not just blubs like the retards like to do...) Great housings and great fit, I would highly recommend.

These installed ok on the truck. I have bought Anzo headlights for other vehicles and felt they were better quality than what would come if I just called napa or someone. The quality of these was good but not up to what I'm used to from them. The finish of the inside parts is nit great where they fused the plastic inside pieces they left rough melted edges showing. The rubber gaskets were not formed correctly where they are to meet the grill and had to be held in place to close the hood until they started to hold their shape. And finally the shape of the marker light doesn't exactly match the fender.

They are the best

Great fit, look good, easy install.Great as an OEM replacement.Not a high-performance lens, but I only wanted stock. Keep that in mind.

What a waste. I pay huge markup on these poor quality lights expecting maybe..just maybe they wont be garbage but once again I'm wrong. Zero quality control. Anzo USA....yeah made in Taiwan. If you love to have water inside your headlights buy these ones. No real answer for the 2nd gen dodges. Real companies like ghost recon only make the tail lights and third brake light for 94-02

Shipping was in time. Were as advertised. Fit good, work and look great