SHA CERLIN 14 Inch King Size Metal Platform Bed Frame with Wooden Headboard and Footboard, Mattress Foundation, No Box Spring Needed, Under Bed for Storage, Non-Slip Without Noise, Industrial Mahogany

It's a very nice bed frame the only issue I found with mine was that the middle support beam is not quite long enough the reach end too end. Their is extra screws in the packaging, there's two longer ones that are extra that you can use as a substitute to make up the extra distance to reach the bottom end on middle support beam.

Pros: Well designed and engineered, the included Allen wrench is all that is needed to assemble, everything lines up and all threads can be hand tightened before finishing with wrench. (note: do not over tighten especially the head/foot board, none of the parts require excessive torque), Each part is numbered. One person can assemble the bed. The headboard and footboard are MDF and both sides have the faux wood laminate. Having 9 feet to support the bed is good and the space under the bed is great for access under the bed and the bed also comes with spare parts.Cons: The instructions could be a little better i.e which way up to install the side rails (rubber dangly bits down) not clear in the photo, which way up for the center rail (foam side up, also the screw for the footboard can be backed out for easier install of the center rail and then reinstalled)) As others have mentioned the slat arrangement is less than desirable, they are very narrow and therefore the space between them may not meet the requirements of some mattresses, I had a foam mattress and needed to add 1/4 plywood over the slats and fastened down by drilling holes in the plywood and using nylon ties in several locations to hold down to the slats and frame, which makes it very easy to slide the mattress onto the bed and later rotate the mattress etc. The bed is a little larger than the queen size mattress; however I like that for my application. I placed plastic with foam carpet protectors under each leg and the bed slides easily for cleaning

Pros: the bed looks great, and this is why I picked it. it's also one of the least expensive options out there. it was pretty straight forward to assemble, if you take your time and do it carefully.Cons: the frame is slightly bigger than the new mattress we got (Casper Original Hybrid) even though both are "queens".The biggest issue is that THE SLATS ARE TOO FAR APART!! Our new mattress says slats should be no more than 3 inches apart. I never saw that until after receiving the mattress (and already had the frame assembled). The frame has slats that are almost 6" inches apart. So it's completely not functional. I'm so sad.

Okay, so, the good first. Looks exactly as advertised, and surprisingly sturdy for a "build it yourself" bed. Literally no complaints with the quality of it so far. Now onto the bad. First, it's about a foot too BIG, in that I have a king mattress, I bought the king frame, and there's a big gap between the mattress and the footboard/headboard (you can choose which part has the gap, we have personally chose to put the gap at the bottom because pillows sliding down to the floor is stupid -- that's the whole reason we wanted a headboard in the first place). I only took 1 star off for this because in the winter when I have 5 quilts piled on the bed, I bet that gap disappears at the bottom. I still think it's a bad design choice though, and I can confirm I didn't get a defective frame because other reviews mention the same thing. The other con, but I didn't take any stars off for this, is that my husband keeps forgetting the footboard is there (on account of it being comically low), so every morning I wake up to "OH MY GOD OW THIS BED IS THE DEVIL, IT JUST BROKE MY KNEE AGAIN!" Hahaha, I feel so bad for him but after spending nearly $400 and assembling this very pretty frame, I refuse to return it just because he insists on fighting the footboard with his knees.

I have read review after review the middle support is short and the bed frame isn't sturdy. In my opinion it is extremely sturdy. I had no issues with the center pole not reaching each end. It looks great and I expect years of use from it. Oh and no squeeking either. I made sure all the rubber inserts for the support beams were pushed in all the way. I bought the full size and purchased a bunkie board separately to support a memory foam mattress properly.I did reach out to the seller because in the description it says they have a video they can share and boy was it useful. Took me alone 90 minutes to put it together. I watched the video carefully and paid special attention to which way all the supports go and with what size screw.

While it took me over an hour to assemble, it was well worth it. I love the styling of wood and metal. I chose that stylefor other pieces I purchased for my living room. The bed is sturdy and because I have tile floors and my bedroom is a bit smaller, I can slide the whole bed to one side or another making linen changes much easier. Good product.

I put the bed together by myself. I felt that it was easy but just took some time. I was very surprised that it had so many peices and thought how will this be sturdy. It is sturdy! It's made from very strong metal and the construction is well supported. I'm very impressed with this hed and highly recommend it. I wouldn't say that it is a style for a master bedroom but but for a kid/teen its perfect!

Some of the slats were just a few centimeters too short! After all the work to put together, slats were last step. Had me in tears! Would NEVER do this again.