Black Cable Tie Zip Self Adhesive Mounts Set, Cable Base Holders with Multi-Purpose Sticky Pads 100 set

Not overt strong so don’t hang weight on them, but helpful. I installed a retractable leash on my motorcycle garage door opener, this ensures I don’t drop it. Helped quite a bit.

I paired these with some under desk baskets. The baskets takes the heavy load and these cleans up the rest of it. I'm running all the exterior to the PC lighting off 7 Corsair Lighting Node Pro controllers so they could all be in sync with the PC lighting. But those controllers not only need USB to run the data, they're set up to be used in a PC, so they also need a PSU's sata power cables. So not only did I have numerous cables from those controllers, the color changing lava lamp I modded in LED rings into, the 4 LED towers I made, numerous normal LED strips behind the TV, monitor, and around the desk, and all the normal PC cables. I also had to deal with a non modular PSU unit from an old PC. I had it laying around collecting dust since it wasn't a high enough wattage to use in my current build, so I figured I might as well put it to use. The jumper on the 24 pin plug needed to fool the PSU into thinking it's plugged into a motherboard and getting the power signal, was routed to a switch I mounted to the desktop so I don't need to reach down there to turn on and off all the exterior lighting. So yet another cable, SMH. All that rigamarole made for one hell of a cluster you know what rat's nest. So these ties and the 2 baskets were an absolute must. I wasn't going for wining in any cable management awards with that fiasco but I got it done at least so that it looks good unless you go crawling under the desk. I mean it looks good from my house at least. Wait, what?..... :)I had to ding a star because a couple did come unstuck and the cable they were holding up I felt wasn't all that heavy. But by and large they've stayed in place and it's been almost two years now, so all in all I'm happy with these.

Works for everything I need it for. Adhesive really sticks

Be aware the mounts and wraps are small, not suitable when using anything but small wire. Dimensions are given in one of the pictures, which I did not see. My fault, changing from 3 to 4 star.

Helps with cable management. I used this underneath my desktop to secure cables in an area where other cable management products would have failed. I will buy again if I need more in the future.

I got these for holding wires on my bass boat. I had bought some similar ones many years ago, but don't remember where. I found these and figured they were the same. Installation was simple: figure out where you want them, peel off the paper from the back side holder to expose the adhesive tape, press firmly in place, thread the zip tie though the holder, zip tie the wire. First day out in the sun, all of the holders came loose due to the heat of the sun. Not happy about that. All of the ones I put on years ago are still on so it looks like this brand uses a different adhesive. I'll have to go back and replace their adhesive with some quality 3M tape.

I really like the strength of the adhesive. The ties could be a little bigger but still work. Make sure the surface is clean before sticking pad. Makes wiring much cleaner looking. I will be buying a lot more of these.

I've used my first bag of these and bought more. They work well in almost any situation and can hold 1 or multiple wires and cables.

So over 50% of these that I’ve installed already have let go. They’re sticking to the surface that I am putting it to, but the adhesive stuck to the holder releases almost every time the surface is way too smooth for it to stick to. Absolute waste of money and a huge waste of my time now I have to do it all over again with a better product