Pyle Wall Mount Speaker Stands, Adjustable Length, 110 Lbs Capacity, Black (PSTNDW17)

These are well made and easy to setup.

I recently upgraded my home theater from a 73-inch Mitsubishi RPTV to an 82-inch Samsung QLED. I have a 5.1 surround speaker system with the front left/right and rear left/right speakers mounted on the walls. However, when I had the Mitsubishi, I just placed my center speaker on the top of the cabinet. That wouldn't work with the Samsung so I did some research and found the Pyle Speaker Wall Mount which looked like it was perfect for my needs. The mount arrived well-packed and undamaged. The mounting instructions were rather brief and didn't state the size of drill bit to use when drilling the holes for the screw anchors so I had to slowly increase the size of the bit until I reached the perfect diameter. I determined where center was and hung a weighted string from the TV so I could mark the wall. From there I measured twice and drilled once. As you can see from the photos, I successfully installed the mount. It is extremely sturdy and easily holds the center speaker which weighs 10 pounds. I played several videos and there were no unusual vibrations or extraneous noise when the center speaker was outputting sound. I am very pleased with this mounting system from Pyle and it's well worth the money I paid. Now I need to work on hiding the wires and purchasing a cabinet to hide everything else. Highly recommended.

The brackets are sturdy, adjustable and have a great finish. The first screw head broke off in a pre-drilled 3/4 inch deep hole, so they are poor quality. I used some construction screws I already had for all screws. I highly recommend the brackets. Just don't take a chance on the screws and use your own good quality screws.

Easily installed, perfect for my application. I'd purchase these again.

Recently, I bought a Cerwin-Vega center channel speaker that proved to be about 2x larger and heavier than I'd anticipated, and the small shelf I'd had an old cheap Boston Acoustics speaker on it had no chance of holding it up properly. These mounts are extremely strong and sturdy, but I'd recommend if you're going to put more than say 10lbs on them, be sure to screw them into studs.I also never trust the provided screws, so I went with 2" "Grabber" brand screws, which fit perfectly. Only tricky part was making sure to get everything level.The other thing I like about these brackets is they're quite innocuous when the speaker is atop them, and the fact the stands will slide out is a nice bonus. The only thing I didn't like about these is they're a tad expensive, but on the other hand if you want strong, you have to pay for strong. Anyway, definitely no fear now of that big heavy center channel speaker coming off the wall. Would buy again.

I bought a like-new unit to save some bucks. It arrived complete with everything so I figured someone just returned it.Threw out their hardware and used #10 wood screws @ 2" long for studs. My speaker is only 19# but it may just hold its rated weight without failing as long as you stud mount.In my opinion, I would not mount them with toggle bolts. Not saying they wouldn't hold but no way they are coming out of my framing. Choice is yours, of course.Paid $19 and even at full price, they seem very well made.

1st screw snapped almost immediately after bottoming out, snapped off inside of the wall. Now I have to reposition my speaker and get new hardware that isn't made of twigs. Otherwise the set is good and accommodates for very large speakers/subs.

Only observations are that the units don’t have features that limit extension or ‘capture’ the sound bar. Would be nice if there was a ’stop’ at the end of travel. And the sound bar simply sits on the mounts - a clamp or strap feature to hold down an position the SB would be great to provide extra security for your investment.Easy installation, sturdy enough to not be concerned that someone might inadvertently put pressure on them and send your sound bar crashing to the ground.Love the minimalist design. It ain’t furniture and it ain’t trying to be, thank you very much.

This product was bought to hold our centre channel for our stereo system. Very durable and is holding it up very well with no problems at all has been up for a long time. Love it.

Excelentes. Justo lo que quería, por que mi tv esta instalada justo en un borde, lo que haría qué mi barra quedara inclinada, al poder sacar un brazo más que otro, me permite nivelar la para dejarla al mismo nivel qué mi tv.

I bought this to lift my sun off the ground and even though there are no screws to hold it in place, the pads provided work just as well. No movement of the sub and very strong

Product is exactly as shown.

Installed to carry my Bose subwoofer 500. Was looking for brackets that can be a little discreet and can take the heavier speaker. Very happy that this bracket can achieve both requirements.