Oregon Set of 3 Longer Life 592-616 Gator Fusion G5 3-in-1 Mulching Blades to Replace John Deere GY20852, GX21784, GX21785. Made in USA

Blades came as described. First cut was great and looks like the blades will hold up great

I read that some people were sharpening them, and others saying it was unnecessary. I decided not to sharpen them, thinking that if they really needed it, I could always take them off again and sharpen them. Out of the factory, they appear fairly dull. They have a coating on the cutting edge (I'm guessing to protect the blades or packaging in transport). This wears off very quickly. Because of this, the blades don't really begin to cut well until after the first quarter acre or so. After that, these blades are really great. The cut very cleanly, and actually have a good amount of lift to them, much much more than the stock blades on our LA145. One down side is that these seem to be much heavier than the stock blades. If the mower is not completely warmed up, they almost kill it when I engage them. These also seem to do a better job of mulching up the clippings, making them lay more evenly instead of clumping up. This also means they blow right back into your nose easier in the wind. So if you have allergies, you might want to take that into consideration. All in all, an excellent blade that I can only hope will hold up with time.EDIT: I babied these blades but finally had a big OOPS moment a couple days ago, when I backed over my homemade lawn striper. As a result, I ended up running over a brick and two pieces of 3/8" rebar. Ouch. Shut the blades off quickly but the damage had been done. Surprisingly, these suffered very little damage. Two of the blades had very small nicks in them (less than 1/4") and the third was untouched. They sure bent the hell out of the rebar. Extremely pleased with how durable these blades are and have confidence they will last for a long time.

Good quality blades. Genuine Oregon branded. Mine are on a John Deere E160.I trimmed a bit off the top of my lawn and (JD mower deck adjusted up high) and my shoes were covered in grass. This is not the blades fault, but be aware that they have massive lift and there's no place for the grass to go. The blades do chop the grass up nicely. It's nice to have about half the grass clippings piled up as I normally do.I didn't notice a difference in sound volume as others have.

i have installed gator blades for the past 5 years on many different machines. This may be the first time I have used this particular iteration; maybe it's just the first time I purchased from this seller. Either way, I love gator blades. I install them for my own landscaping buisness and for machines I repair for customers or friends. I use a commercial balancer before every installation even new blades. This set was way out of balance for a new set. It took 2 to 3 times the normal amount of grinding to balance them. However, they are now perfectly balanced and I am sure they will perform well. I have already mulched one lawn of winter leaves and they did very well. I will buy again.

UPDATE: Purchased these in May of 2016. Never touched the blades other than to clean them off when I cleaned the underside of the deck. Last year about half way through the season I finally used a grinder to refresh the edge. Purchasing a new set now for 2020 and will keep the old ones as backup. (or as my wife says, "Junk) Depending on the height of the grass it usually takes me about 45 minutes to an hour to cut my lawn. Gets cut weekly from mid May through September and less than weekly April, October & November. (JD LA130)Original Review:I've been trying to cut the grass at a longer length (3.75" - 4") to see if it helps keep it greener and reduce some of the weeds. With the factory high lift / mulching blades, even when new, they didn't seem to have the lift necessary to pick up the grass once the wheels ran over it. These new blades do an excellent job of lifting, even at the 4" setting. They also do an excellent job of mulching what gets cut. Had one section that, due to weather and other factors was getting about 3" cut off the top. I use the mulching adapter on the discharge opening so everything that gets cut, stays under the deck. (With the deck set at 4", some does blow out around the edges but not a significant amount.) With the factory blades cutting this length would leave significant "Wind Rows" behind the mower. While there was a small amount of this in the heaviest cut section, it was much less than I would have expected and the material that was left was nice small pieces, well chopped. The grass was nice and dry which I'm sure helped in the mulching.

Most blades don't last long for me as I live in the country on a semi-sandy plot with lots of trees. I constantly have to clean up large sticks but leave the smaller ones and mow over them. There are lots of leaves in the spring that collect at the edge of the woods that surround my lot. I don't rake them up (hate raking) but instead mow it into mulch. In addition I have ground moles that leave humps of dirt all over the yard where they push up the sandy soil. My neighbor told me to try these Oregon blades (he called them sand blades) and they seem to last twice as long as the mulching blades that come standard with a riding mower. Surprisingly they are only a little more in price for the set. So they are now my go-to replacement blades now.UPDATE: I ordered these spring of 2019. I just sharpened them for this season and the wear indicates they will last for the rest of the 2020. 2 years of the described abuse is pretty good. I just ordered another set for 2021.

These blades are a much better quality and cut better than the blades that came on our John Deere.

Work great.

But they fit and work

Noticed improvement over my John Deere mulching blades. Seem very well made and great finish on the blade themselves. Anticipate they will last a very long time

Put these on my D140 and they mulch just fine. I recommend them.

They do a great job, however they still leave a small trail of clipping behind in some areas.

as describe