LET'S RESIN Crystal Clear Epoxy Resin, 64oz Bubbles Free Epoxy Resin, Table Top & Bar Top Casting Resin, Clear Epoxy Resin for Art Crafts, Jewelry Making

I fought with this entire bottle trying to get one thing to come out without bubbles in it and short of laying really thin layers and hitting it with a torch, it wasn't possible. I tried mixing by hand gently. I tried using a mixing attachment on a drill fully submerged. I tried pouring right after mixing, as well as waiting the recommended 10 minutes, even 20 minutes. I tried heating it up in warm water prior so it would be more viscous and thus bubbles escape easier, but no matter what it just insisted on keeping bubbles trapped. I think the only way to get this really bubble free is what I've seen a few other reviewers mention by dropping it a vacuum chamber for 10-15 minutes and drawing out the bubbles.The smell is awful. Very strong and harsh chemical smell. Do not go anywhere near this in a small room without tons of ventilation or a filtered mask on. The chemical smell will burn your eyes, nose, and throat otherwise. This is by far the strongest smelling I've used compared to Epodex, Total Boat, and SuperClear. The pieces stink for several days after they've cured too which I don't care for because it increases the amount of time before it is saleable in my opinion which defeats the purpose of having a faster curing resin.Speaking of curing. This stuff cures way faster than it says on the bottle, which means much shorter working time and much more heat released. I tried pouring in a 60 degree room to slow that down some and it wasn't enough to slow it down at all. 80 degrees, 60 degrees, it didn't care.For the good parts though... it is somewhat of a savings over the more expensive resins with slower curing times. It also does have a very high hardness once cured. I have a few resins that still have that "soft" sound for as much as 2 weeks after when you set it down on a counter top. This stuff has a very "hard" and solid sound when you set it down. I feel like this lends way for it to be much more durable in shorter periods of time, and thus products would be saleable sooner.I'll probably try this stuff again if I ever invest in a vacuum chamber because the cost, fast cure, and quick hardness could all be desirable if the clarity was there, but I'm not rushing out to spend another $200+ just to get this to work when I can get a few gallons of my trusted resins with that money and be on my way to saleable products and not still messing around.

I purchased your resin about 2 years ago. I started other projects and have not been using resin too much since then and I still had another brand whose smell was sooo offensive I haven't been eager to do too many projects. Well today I opened my bottles . First of all before I even opened the bottles I noticed that 2 years later they were both still crystal clear. My other brand's hardener had yellowed over the same time. Next thing I noticed was the consistency, both still very fluid. Next and I mean my overall favorite part MINIMAL ODOR!!! I am sooo friggin happy about that!! Now since it is still a chemical I can't so no odor but it is waaay more tolerable than the other brand. I still have to wait to see the results once it hardens but so far you have a faithful customer going forward.

I hate working with resin. It's so sticky, If it spills, thoughts and prayers. But I do it a lot. For the art of it.This is BY FAR the clearest, easiest product I have worked with in two years (though, honestly, I knocked over a mold TWICE, and it was a pain to clean up. But, it's resin, sooo...).100% would recommend. As a matter of fact, I came to Amazon just now to buy more and decided to leave a review.Peace,C.L. Roberts(Author of the novel, NOW THAT YOU HAVE SEEN ME, available on Amazon.)

First I want to say that I love a lot of 'Lets Resin' products. However, I had never tried their actual resin.My business is taking off so I need to buy a lot of resin. I have been looking to increase my profits by buying lower cost resin. That is why I ordered this. 64 cents per once compared to nearly 90 cents an ounce for my Epresinart.I have a system which includes timing to coat, pour a second layer or run a controlled explosion with live flowers. The Epresinart works perfect every time.I got this resin in and mixed it, put in the vacuum chamber and noticed it took longer to remove the bubbles.I Poured a deep mold with a live flower. It did heat up and pushed the moist air out and seemed like it would be the same. However the next day when I took it out it has a rubbery feel to it. Hopefully this will harden before my next show.I also poured some as a sealer for my head storms. They were still not dry after setting overnight. That might be a deal breaker for me.I have learned by experimentation never to mix different kinds of resin. Sometimes you can see a separation. Since I have a lot of projects going at once I did order more of this to have the same resin throughout.Update October 5, 2022: I have been doing a lot of experimenting and have found that this resin has a few quirks.I heat the resin up using a seedling heated mat. It still takes a good 15 minutes in the vacuum compared to 9 for other resin but at that 15 minutes I get a beautiful, crystal clear outcome.I was asked by a buyer if I had just a pure, clear Skull and said "Sure'. But after checking I had none left. The one in my attached pictures is from this resin. Very clear. Not a single bubble.Note: I still have trouble with it for thin pours. They just never seem to harden even after a week. That's fine, I will just use this for the thicker pours, which is my main pours anyway.So, in my opinion it is a good crafting resin if you have extra time to wait. If you are in any mass production, I would not use this. That is painful for me to say since I use a lot of 'Lets Resin's other stuff and really like them.

Deep pour coffee table.....Figured redwood live edge slab......First time doing a pour and worked perfectly.....Very few bubbles, which were easily removed with a hair dryer......Nice hard, glass-like finish....Can't find a reason why I would buy a more expensive brand when this worked so well.....Bought three times......

This is the first time I've tried a different brand. It doesn't create bubbles and very easy to use.

I use this resin in my art practice and especially like its clarity, lack of ofor and ease of usage. Great value!

The manufacturers claim that this resin cures in 8 to 24 hours. I carefully measured and mixed a 50:50 ratio as per the instructions. It has been 3 days and it is still in its liquid state. This resin DOES NOT CURE. This is an absolute waste of money. If returning it was not such a hassle I would definitely be wanting a refund. Don't believe me? Check out other reviews of this product and you will see that I am not alone. I wish I had never bought this. Save yourself time, money and disappointment. DO NOT BUY.