ZugGearBlack Plate Mount Stabilizers 2U 6.25U 7U for Cherry MX Compatible Mechanical Keyboards (DUROCK Black Plate Mount 60/87 Keyboard Kit)

The media could not be loaded.  These are excellent stabs! I got the Full Blackout V2 Kit for my Keychron K10 PRO to replace the stock stabs. The stock stabs on their own weren’t bad and likely would have been good after removing, cleaning, tweaking, holee modding, and rebuilding, but I figured why go through all that when I could more than likely do it once with what is widely known in the community as some of the best stabs you can buy. So I copped these, removed the stocks, and installed everything.First let me say the outcome is far better than I could have imagined. No rattle, no weird hollow sounds, no metallic clanky or crunchy sounds, no pinging or clicking from uneven or less than flat wires (and I didn’t have to re-level wires). Just smooth clean performance. I believe that this is 100% a direct result of the Soulmate Pack that ships with the stabs. While a bit time consuming and tedious to apply, I believe this accomplishes what the holee mod does, but in a cleaner, more consistent way with the provided adhesive backed pads and dampening stickers. They work amazingly well to make these stabs perform even better than expected, and without cutting pieces of bandaids or foam, etc. The tiny pads that insert into the stems being Red make it easy to see where you’re placing them inside the stems whether you’ve got the black, smoke, clear, or white kit. And the small pads for under the wire provide a comfortable little bed for the wires to rest on which definitely circumvents wire rattle later. Again, install can be tedious, check twice, install once. But it’s so worth it!This was my first time installing stabs, and while I’ve being doing IT and tech work all my life, I have no doubt any beginner with patience, planning and persistence could easily do the same. And trust me, it’s well worth the time, effort, and cost of the kit! If your stabs are not making you happy, don’t hesitate to grab and install this kit!EDIT: Post install Video added. I was after a semi-muted, thonky stab sound profile. Happy with the results. The sound is also a byproduct of hand lubed Gat Yellows which I frankenswitched with Milky tops, Gat Pro 2.0 bottoms (bigger LED opening) and heavier 68g springs.

Really decent, black nylon, plate mounted stabilizers. Like all stabilizers, they benefit from a small application of lube; I used Super-Lube and have no complaints about it's performance with these stabilizers.The Good:- Affordable, quiet, plate mounted stabilizers.- Stable.The Meh:- Basic black

Durock makes great products! I am new to the keyboard scene and still testing products and i have found success with durock products. I first purchased they linear switch and now trying their stabs. They are perfect! I was able to do the holee mode very easily and lube with no mushiness and they are smooth as butter. And best of all...what for it...the rattle is gone! I tried it stocked yet with some lube and they were perfect too but I got curious and went the extra step to mod it. My nk65 is now perfect with all durock linear switches and stabs. It is my own endgame. All white theme.The price is comparable with others plus prime shipping is a no brainer. Get a variety because you never know when you will need plate or screw in stabs. Go white, clear, smoked, or OG black housing.I'm so happy with everything durock.

These stabs are great. Very firm and little to no rattle. Once lubed they feel and sound great.

Great stabs! I had some trouble snapping the wires into the plastic stab pieces during install, it was a very tight fit. Otherwise, I think it contributed to great stability. My keyboard sounds amazing, especially my spacebar!! Highly recommend for keyboards that take plate mount stabilizers.

...sorry, couldn't resist.Replaced the rattly stock stabs in my Drop CTRL, which immediately made it sound like it was worth the asking price. Perfectly tight fit in the plate, wonderful performance unlubed and uncut (yes, I mean it). No need for a bandaid mod or grease. However, you may still want to do the teflon tape mod on wire ends, as they are quite loose and may rattle in some combinations. In my case, for example, they chose to rattle in a right Shift of all keys... Easy fix with some plumber's tape.

I'm new to the hobby of collecting mechanical keyboards and prefer hot-swappable, full size options, of which there are few. One of my purchases was a new GMMK full size. The stabilizers are adequate, maybe a little rattly, but definitely nothing that drew my attention during daily use.I had an opportunity to add a used GMMK full-size prebuilt to my collection. It had standard Gateron Brown switches. It came at a significant cost savings, being used. However, it was my first used keyboard. I didn't realize what problems may arise from regular use, as I'm fairly gentle with my technology and don't abuse or use tech forcefully. The used GMMK had significant rattling in the spacebar and stabilizer keys. It was distracting. Finger contact with the key would cause a distracting rattle. All my other keyboards were new and didn't have this type of problem.I researched modifying v. replacement of keyboards. There are a lot of inexpensive stabilizer mods but my experimentation was not providing solid results. Many mods require stuffing materials between parts to tighten tolerances and provide barriers to direct contact. It required a lot of fine-motor detail work but not good results for me. I opted for full replacement, as the kits weren't terribly expensive.The stabilizers aren't difficult to assemble and it was helpful comparing to the old stabilizers to get parts in correctly. Once they were assembled and on the board, these stabilizers were better than those on any of my other keyboards. I eventually removed the stabilizers from another GMMK with my Zealios 65gs (personal fave) and replaced that for "daily driving". Needless to say, the product worked ideally, as it quickly graduated into my favorite setup.

I put this set into my Monstargear XO V3 and it sounded phenomenal. I did not need to clip anything or add the pcb shims as there were no rattle. Light dielectric grease and it was clean smooth clacks from there. Overall good price for amazon durock stabilizers.

They arrived really quick and are genuine durock stabs, i mean thats basically all there is to say, if you lube them with some krytox correctly you’ll have 0 stab rattle

It works and sound amazing, so much better than gmmk stabs. The housing were very tight with my gmmk 2 96, I still managed to push it through without having to file it. I regretted that I bought the gmmk stabs.

Nice

I guess some people got bad batches, or their got damaged during shipping or something completely out of the ordinary, because mine were perfectly fine. All ten washers, all ten housings and stems, four 2U wires, and the 6.25U/7U wires. No clones or anything. Exactly the same Durock packaging I got on some Daybreak switches about a month ago.Wires weren't bent or anything; they rolled perfectly flat on my desk.Threw them into a GMMK Pro and the spacebar doesn't have any rattle now.So yeah. I guess the rest of these reviews got extremely unlucky, or I got extremely lucky. Take my review with a grain of salt, maybe ordering from here is a bit of a coin flip, but for the record, mine were fine.