Kenuco 22U Standing Open Frame Rack with 4 Wheels and 4 Legs - Steel Network Equipment Rack 17.75 Inch Deep

I was pleasantly surprised by this rack! All the holes lined up well, the bolts and nuts were perfectly threaded and easy to start. The wheels worked well on low pile carpet. There were lots of rack screws and "inserts". There are removable panelsat the front and back of the bottom for cabling. I don't believe there were any on top, iirc. Nothing fancy, but it's done well! Good deal!

Pros:1 - Heavy duty construction2 - Well machined parts3 - One extra screwComments:Let's get right to it. I needed a rack to hold my audio components including two amplifiers which together weighed 95 pounds and this rack does that easily.The the steel parts (only 8 for the 20u rack) are well formed with rolled edges (no cuts!) and when assembled, the rack is square and does not wobble. It does not come with any shelves but for my rack I added a full size shelf (1/3 up from the bottom) which makes the rack rock solid stable. The silk screened rack position marking are also spot on. A rare treat and near impossible to find at this price.The rack was supplied with a bag of screws and nuts which were for rack assembly. All of the screws were well machined and there were no stripped or badly threaded screws or nuts. The rack assembly time is substantial as there are 16 sets (screw & nut) for the wheels, 16 sets for the (4) upright bottoms, 16 sets for the upright tops and another 4 screws for each side... and one extra screw is included so don't freak out.I gave this rack 5 stars for being easy to assemble because I've assembled this type of rack before and this one didn't have any issues with being out of square or having stripped screw holes.... but. First timers and pros alike should be prepared to spend HOURS assembling this thing. As I pointed out, there are a LOT of screws and you shouldn't use power tools because you can easily damage a screw head or mis-thread a screw.At a leisurely pace (tv on, talking on the phone and slacking in general) it took me about 3 hours to unbox, assemble the rack and put in one shelf. Be aware that this rack uses captive nuts for the shelves which are time consuming to insert. In the end it took 3 days (had to next day order more shelves to complete the racking of components) to finish the rack.BTW, I read the other reviews and yes, I too have bought some crappy racks but this one, at this price is fantastic! If you buy one, take your time assembling it and you will be rewarded.Thanks for reading!

Solid for the price. Feels sturdy enough to hold a couple hundred pounds at least. I have not seen a max weight spec listed anywhere, so I can only say what I would feel comfortable putting on. I'm knocking off a star because if you install the casters bolt down (drive the bolt torwards the ground) using nuts, you can only use 4 bolts on each upright instead of the 8 that they have pre-drills for. Nuts aren't 100% necessary on the casters, as the holes in the structure on the bottom are threaded, so if you drive the bolts up from the bottom it should hold, at least temporarily, but it feels more solid with the nuts. To do both, another 16 nuts would be necessary. It came with enough bolts, just not enough nuts.

So first off, I got the 22U rack with the two shelves. The rack and shelves seem very sturdy, and was pretty easy to put together. The whole thing is connected with M6 screws and nuts. In my box, there were 58 screws and nuts, enough to put it all together correctly with a couple spares (16 for the casters, 16 each for the top and bottom to attach the vertical rails, and 8 for the side rails.) It also came with a full bag of cage nuts and screws for racking equipment (at least 50, maybe more), 4 small screws for the two cover plates on the bottom, the 4 casters, and 4 feet with long bolts with two nuts. The front and back of the rack have numbers printed to mark each U of space and to help make sure you are properly aligned. The shelves seem sturdy but are only two post shelves and do not extend the full width of the rack. I expected this so thats fine. Also, this is only a ~17" deep rack so you can't rack your normal size Dell or HP servers in it unless you don't mind them hanging out the back.The rack mount rails have the normal square cutouts for cage nuts. The top of the rack, for me, comes just a little above my navel, so I am thinking about having a monitor, keyboard, and mouse on the top instead of using the shelf for the keyboard and mouse. Hopefully I will be able to fit my Dell T3500 and my old gaming PC on the floor of the rack, and then above it I can rack my main switch, router, and the other rackmount items I have. I'll update this review if there are any additional comments later.

Order this for my home studio rack setup and it has been nothing less than amazing. Assembly wasn't too bad but there weren't any instructions included.

Title (again), says it all. Even though NO instructions were included, it was easy enough to figure out how to assemble. One thing that I would suggest, if they could make a 14" deep rack system instead of a near 22" rack system. Other than that, I guess I'll make the room for the rest of space that's left for other related items to stack in and on the rack system. Again, GREAT RACK!!!

this is a terrific unit for both servers and audio equipment. i have 2 x 75 pound amps on one unit and it handles it no problem. i have both the 15 and 18u types and both are great. the 18u unit comes with side bars and a 1u shelf included. amazing value. strongly recommend.

Lo usé para equipo de audio y todo cabe excelente , muy práctico y amplio

Came well packaged, and was easy to assemble. Instructions were adequate. Plenty of rack cage nuts and screws for the standard square holes on the frame. The casters were average, but it came with levelling feet if you choose to not use the casters. Overall rack was well built. I have 2 audio amps, 2 network switches, a rack mixer, and a couple audio patch panels, PDU, and a UPS all on the rack and it held up excellently in the past year. No burrs, fit and finish was excellent.

Beware that the top or bottom piece may have excess welding material in the inner corners which prevents the posts from sitting square, had to return mine