10PCS USB 3.1 Type C Connector 24 Pins Male Female Plug Socket Receptacle Adapter to Solder Wire & Cable 24P PCB Board Support Module

These work great for shorting USBc cords etc. Soldering them is easy, and with a little shrink tubing I got what looks like a professionally made cable end. Good product!

Used these USB connectors to make a custom cable to externally power a USB dongle DAC (Onix XL1) Worked extremely well! Not sure if you can actually get USB 3.x spec with only four leads presented.

USB-C everywhere. This is a very easy adapter to work with for small projects. Note this will NOT work with power delivery.

Easy to solder, good quality connectors. They do what they're supposed to do well.

Perfect for my embedded work.

You will NEED to add 5.1kohm resistor to each side to pulldown the current or else this wont charge unless you're using a dumb USB-A outlet. price is okay, holding it while you solder isn't too difficult with a 3rd hand, but soldering SMD is a pain without the right tools. you CAN use a full sized resistor but it makes it bulky. would rate 5 stars if this was made clear in the listing.

Works perfectly for my now USB-C headset, and I have 9 left to Frankenstein the rest of my devices!

After soldering some pins to the four pads and connecting them to my breadboard, the USB-A connection to the computer worked flawlessly with my project. However, when I tried using a USB-C to USB-C connection, power was supplied, but no communication occurred. Based on suggestions from Spica’s review, I soldered a connector wire from the underside pad to my breadboard, added a 5.1K resistor on the breadboard, and it worked perfectly. Given the difficulty of soldering the resistor directly onto the unit due to the limited space, I plan to keep it simple by extending the pad with a connector wire to the PCB pins and placing the resistor to ground on the final PCB board itself.