Gorilla Automotive63621 Standard Mag Gorilla Guard Locks (12mm x 1.25 Thread Size) - Pack of 4

Put on my 2019 Toyota Camry.Does not fit correctly on a lot Toyota's with only the single provided washers, the shank is too long. You can torque them down and the washer will not be contacting the wheel. You need two washers or one really thick one. If you are replacing mag seat lug nuts, just pry off the washer from the lug nuts you took off. They're just held in place with notches, work from side to side with a screwdriver and they will come off. Now just use two washers per lock and the shank length matches the OEM lug nut. Definitely recommend removing them before bringing it to a shop, guaranteed at least one washer will go missing.FYI, an 12 point 16mm socket can still be hammered into the lock, although it would be much more difficult than most locks since it has a wall around it.

Nice lug nuts , used them for my nismo rims on my g37, they were a touch longer then the factory lug nuts so I had to use 2 washers to make good contact with the rim they supply 1 washer per lug, I just prayed washers of the old lugs, still a smooth ride didn't throw wheels out of balance at all, overall nice quality, good price,I'm happy with them

This are perfect fit for my 2013 Highlander. Just got a new set of tires and needed to secure my investment.They look very durable and very secure. I feel much better now .

Was looking for a little protection on my BBS rims. Of course no lock is full-proof, I'm merely banking on the assumption that if you can make it difficult for the would-be thief, then they'll either pass it by or take so long in trying to brake them off that it increases the likelihood someone sees them and they get scared off before they're through. I love the design of these because you cant as simply hammer a special socket on the outside of it to get them off - because the outside wall spins freely of the inner "key socket" part, which is too odd of shaped and thin to hammer a socket in their easily. I definitely recommend these if wheel security is your concern. Another thing to note is you can contact Gorilla and get them to send you matched sets of these lug nuts - that way you can replace every lug nut on every wheel. This again increases the time it takes to get off the wheel and ultimately your chances of keeping the rim!As the other reviewer mentioned, the pictures do match the actual product. I got the Gorilla 63631 standard mag model, as the description stated. Please check out their website first and make sure its the type of lug nut you need.

Works fine with my Mitsubishi Lancer 2016. Cannot judge its durability now. its appearance is great. The only draw back is that the washers are not stuck to the nut like the original one which can cause it is lost.

Another 370Z sport model confirming these fit on the sport rays. Due to the design, the "bang a larger socket over the lock" technique will not work to remove them, and the channels of the lock are too thin for the tines of a universal socket to fit into. These come with the washer you need to mount them, just be careful because the washers can slip off the locks unlike with the oem lugs.

Don't loose the key because most mechanics have never seen this type of lock and the spinning ring makes it a heck of a lot harder to remove. Using the technique of smashing a star point socket on the outside of the lock won't work on these unlike other wheel locks.

My problems with this product (comes without instructions) are that it comes with loose washers and if you are not very very careful in seating the washers flush with axel tire post and wheel base, which is hard to see because it is seated deep the washer will get crushed in the process by the lug nut causing it to be wedged in the hole. It would be a much better design if the washers were the kind manufactured to stay flush (and spinning) with the top of the inside end of nut. Also I don’t like that the ends of the bolts are flat vs the beveled ends of the stock lug nuts, which seat properly without needing a washer. So both problems related.