Dritz 253 Machine Needle Inserter & Threader

Worked great on my sewing machine (Singer 3820) and yes, it's the kind you thread through the front. Just read the instructions carefully (thread goes horizontal in this holder needle goes vertical. I did it a few times and worked perfectly and easily when I figured out I had the thread wrong on the second try. I am blind in one eye and sometimes have trouble threading needles, but this definitely seemed to help and made it a bit faster than how I usually do it. Definitely recommend! It's a good size, fits in the accessory drawer on my machine. The plastic feels a little soft so I may pick up one of the multi packs just in case but it seems sturdy enough for what it's meant for. Instructions are clear on how to use, take a second to make sure you have it set up right. Easy to use one handed. You can use other hand to get the loop once pushed through the eye but the little hook works (that's the part that seems a little soft to me. So far I am pleased with it

I have always had trouble threading the needle of any sewing machine. I only recently learned of these little contraptions, and purchased this one because of the reviewers stating, "it worked every time." Threading that tiny eye only takes mere seconds now. As others have noted, the instructions are sketchy. Try it a few times and you'll have it down and rarely, if ever again, have frustration with this necessary task. Once I was successful, I kept practicing for a while, just because it was rather fun. My only complaint is there are no protective caps on the "working end." I would have appreciated clear caps, like the seam rippers have, since an unknowing child or adult might break this in their personal quest to play with your stuff. For those, like myself, who want detailed instructions, here are mine. It is much easier to do, then to read about; but I also attached some photos: Sit at your machine and have some decent lighting on the needle area. 1)At the busy end (the instructions call it the "Y" section, but it is really more of a cross of slots), hold the implement so either arrow (the arrows are the same color as the handle and hard to see, I'll probably dot mine with red with nail polish) are vertically aligned (up and down). 2)Then slide a section of your thread into a somewhat deep horizontal slot, push it back into the device and having it taunt can be helpful). 3)Now, place the busy end (with the slotted thread) onto the face of the sewing machine needle, slowly sliding downward WHILE slightly pushing it into the needle shaft. When the eye of the needle is engaged, gently push. This will have the plastic cross move back into the handle, and expose a flat, metal wire/stick, that will push the thread through the eye of the needle, forming a small loop. 4)You can try to grasp the loop, or wait, but SLOWLY, release the tension by pulling back (away from the needle) on the device. Slow is critical here, really. You manually pull the loop of thread back through the needle, using a little hook they have on the end of the gadget, or whatever device you like, (I personally use a seam ripper, the same thing I use to pull a much larger loop through from the machine bobbins). Viola! It ONLY TAKES SECONDS and you're threaded again. Happy sewing.

Very disappointed in this. I chose it over others because of the Dritz name. Like others, I found the instructions vague, and the "wire" bent on the first attempt, making it useless. I am not sure it is not plastic. I will continue with my magnifying glass.

Dritz 253 Machine Needle Inserter & Threader: Threads your sewing machine from the front, which the little wire threaders and "fish" threaders can't do. Also designed to insert machine needles, which can be a struggle for some people. Instruction card on the back forms a storage container, so you can find them both at the same time! And videos on Amazon. The thread inserter blade seems a little wide/deep to push the thread through the needle, but I'll try again with better quality thread. If all else fails, put it in your mouth to flatten it.

These are great for multi needle and surgers - just follow directions and poof it's in

This isn’t easy to use on a sewing machine. Actually it’s harder than using a plain needle threader for hand sewing on my machine. I would return, but I have opened it. Even the needle inserter isn’t better than doing it myself. For a reference, I have been sewing for over 50 years so I’m not young.

This review is for first-time users and people who have encountered problems. This, from one who spent many years on a HELP DESK. I wanted to test this threader out so I could possibly help out an elderly parent who is no longer able to thread her sewing machine the old-fashioned way...and she does love to sew. The first thing I would suggest is to learn how this threader works. Hold the blue outer shaft in one hand. Place the thumbnail of the other hand on the outer edge of white plastic hook and gently push down until you see the ultra-thin metal band appear from the center of the threader. Notice the tiny tip is concave so that it will grasp the thread. This is where most people have a problem. If you do not push the threader VERY gently as you slide it down the needle searching for the eye, this metal band will bend. I did it twice. Unless the band is straightened, the threader will never work. A good set of fine-pointed tweezers are needed to bend it straight again. It takes a very delicate touch at first. One you get the hang of it, practice a few times and it becomes simple. Another thing I discovered was that once the thread is through the eye, it wants to pull back through when you remove the threader. Insert your seam ripper through the loop in the thread before pulling the threader back. This works like a charm. Go ahead and slowly pull the thread on through the eye with the ripper. Another thing I would suggest is to have excellent light. Most sewing machines seem lacking for old eyes. Check this out on Amazon for $8.99. I use batteries so I can easily position the lamp where it is most convenient, usually behind the machine. It works great. SE FL89030L 30 LED SILVER LAMP LIGHT I tested several different threaders on a Schmetz 90/14 needle and this was my choice. There are ways to help folks enjoy the things they love to do for as long as they possibly can. We just have to find them.

Tried do many others this just works

The threader won’t work for me. Very disappointed.

Súper practico, facilísimo de usar, la verdad me hace mucho más sencillo el tiempo de coser sin batallar al momento de querer enhebrar

My eyesight isn't what it used to be and I had a very hard time locating the eye in my sewing machine needle. Along came this, and it works! Package instructions are vague, but search for Dritz machine needle threader instructions on google and you will find a Youtube video that shows how to use it. Very easy to use and it's great!

Good

As vezes to aperreada sem conseguir enfiar a linha na agulha e ele facilita pra mim!!