GeeBat460pcs 2.54mm JST-XH Connector Kit with 2.54mm Female Pin Header and 2/3 / 4/5 / 6 Pin Housing Connector Adapter Plug (JST Connector Kit)

Good connectors. And there are more than advertised. 2 male (20), 2 female (20), 3 male (21), 3 female (21), 4 male (20), 4 female (22), 5 male (10), 5 female (12), 6 male (10), 6 female (10). Kinda nice.

Received on time and packaged well. They work great just be careful of your wire insulation diameter. There are little connectors and do not have a lot of room.

Just like JST

I needed to rebuild a couple of connectors for my CNC and these fit the bill perfectly. My only issue is that the pins/sockets are attached for a machine feed and not individuals. The flip side is that they are tiny and individually, they could be easily lost. I did have to buy a lot more than I needed, but at the price, it was definitely worth it.

Comes with enough of each size to get by. Plenty of pins in case you mess up or have a cheap crimper. Note that the kit comes with the connector and board mount connections - there's no way (other than soldering to the board mount connector) to make a crimped connection between two wires.If you're not sure that you need this size (JST-XH), check the pitch size. It's also worth noting that the official manufacturer specification for the JST-XH connection is a 2.5mm pitch, not 2.54. I don't know whether this is specced wrong, or just described wrong, but I've not had any issues using these.

I have a Creality Ender 3 3D printer and have performed numerous modifications. The impetus behind purchasing this kit was when I upgraded my controller board to the BigTreeTech SKR Mini e3 v3. On the original setup, there are two fans attached to the print head, one for cooling down the heat-break and another for cooling down the filament that has just been extruded. For some odd reason, one of these fans had the JST-XH connector but the other used screw terminals on the original controller board. On the BigTreeTech board, all the fans use JST-XH connectors, so I needed to convert the one that had used the screw terminals to have a JST connector.Just a note, the crimp pins are tiny and I have fat fingers and my vision is not what it once was (I'm 51). This made crimping the pins difficult, but not impossible, for me. Once the pins were properly crimped, they fit into the plastic housing with no difficulty and I was able to plug in my fan.After fixing my fan issue, I made several other modifications to my printer. I ended up moving my controller board to a new enclosure on the back side of the printer and needed to reroute many wires. Having this kit allowed me to create custom cables that were just the perfect length for the new location.

Nice assorted set that comes as described well packed and organized in the box. Would have liked the 7pin connector added to the set instead of the 2 pin connector. Like me, I think that most electronic nerds that buy these sets use it either to fix or build their own battery packs. However to build the balance wire for the 6 Cell packs you would need 7 pins. Unfortenately that one does not com with this set so you can only build or repair Battery Packs up to 5 cells while collecting the 2 pins as you hardly use them.

This is a JST-SHP set with a variety of sizes. No complaints. It is what it is. But the tool that Amazon said is "often purchased together" was not the correct tool. They seem to have fixed that as of this date perhaps because I returned the tool. The correct tool is either the one I bought: IWISS XH2.0mm XH2.54mm XH3.96mm Dupont D-Sub Terminals JST Pin Crimper SN-01BM Crimping Tools for Crimper Plier for AWG 28-20 （0.08-0.5mm2） or the simpler yet more expensive Engineer PA-09 Micro Connector Crimpers. The PA-09 is recommended at SparkFun and online. I have not tried it. I can say the ratcheted one I bought works well. Just put the crimps in the tool and press them all the way in so the tabs that crimp the insulation are all the way toward the smaller part of the die that crimps the wire.

As described and in good condition

Very happy, thanks!

Exactly as described!

Nice assortment of housings and terminals. Quality is reasonable for the price.Not confined to this kit but this type of connector is very fiddly to crimp the terminals on the wires.

You get alot.